Follow us on our new Insta page »
Biore UV Fresh & Bright Oil Control Soothing Aloe

UV Fresh & Bright Oil Control Soothing Aloe

water resistant SPF50 PA+++ oil control sunscreen with dewy finish
Uploaded by: thezauza on

Biore UV Fresh & Bright Oil Control Soothing Aloe
Ingredients explained

Also-called: Aqua | What-it-does: solvent

Good old water, aka H2O. The most common skincare ingredient of all. You can usually find it right in the very first spot of the ingredient list, meaning it’s the biggest thing out of all the stuff that makes up the product. 

It’s mainly a solvent for ingredients that do not like to dissolve in oils but rather in water. 

  • It's a super common and super debated skincare ingredient
  • It has several benefits: great solvent, penetration enhancer, creates cosmetically elegant, light formulas, great astringent and antimicrobial
  • It can be very drying if it's in the first few ingredients on an ingredient list
  • Some experts even think that regular exposure to alcohol damages skin barrier and causes inflammation though it's a debated opinion (read more in geeky details tab)
Read all the geeky details about Alcohol Denat. here >>

What-it-does: sunscreen | Irritancy: 0 | Comedogenicity: 1

When it comes to sunscreen agents, Zinc Oxide is pretty much in a league of its own. It's a physical (or inorganic) sunscreen that has a lot in common with fellow inorganic sunscreen Titanium Dioxide (TiO2) but a couple of things make it superior even to TiO2.

If physical sunscreens don't tell you anything, go ahead and read about the basics here. Most of what we wrote about Titanium Dioxide is also true for Zinc Oxide so we will focus here on the differences. 

Also-called: Octinoxate, Octyl Methoxycinnamate | What-it-does: sunscreen | Irritancy: 0 | Comedogenicity: 0

A clear, oil-soluble, "cosmetically-elegant" liquid that is the most commonly used chemical sunscreen. It absorbs UVB radiation (at wavelengths: 280-320 nm) with a peak protection at 310nm. 

It only protects against UVB and not UVA rays (the 320-400 nm range) – so always choose products that contain other sunscreens too. It is not very stable either, when exposed to sunlight, it kind of breaks down and loses its effectiveness (not instantly, but over time - it loses 10% of its SPF protection ability within 35 mins). To make it more stable it can be - and should be - combined with other sunscreen agents to give stable and broad-spectrum protection (the new generation sunscreen agent, Tinosorb S is a particularly good one for that).

Also-called: Uvinul T 150, Octyltriazone | What-it-does: sunscreen

Ethylhexyl Triazone is a new generation, chemical sunscreen (not available in the US due to impossible FDA regulations) that gives the highest photo-stable absorption of all available UVB filters today. It protects in the UVB range (280-320nm) with a peak protection of 314nm. It is an oil soluble, odorless, colorless powder that works well in fragrance-free formulas. It can be used up to 5% worldwide except for the US and Canada.

What-it-does: emulsifying | Irritancy: 0 | Comedogenicity: 0-1

A mainly oil loving molecule that helps water and oil to mix nicely, aka emulsifier. In itself, it can create water-in-oil emulsions (when water droplets are dispersed in oil), but it is used mostly next to water-loving emulsifiers to create nice and smooth oil-in-water creams.  It can also function as a wetting and dispersing agent helping insoluble particles such as color pigments or inorganic sunscreens (zinc/titanium dioxide) to disperse nice and even in liquids.  

Chemically speaking, this molecule is "halfway" between Sorbitan Oleate and Sorbitan Trioleate, meaning that it is also an attachment of sorbitan (a dehydrated sorbitol (sugar) molecule) with the unsaturated fatty acid Oleic Acid, but in a ratio of 2:3 hence the "Sesqui" part in the molecule's name. 

What-it-does: emollient

We don't have description for this ingredient yet.

What-it-does: emollient

We don't have description for this ingredient yet.

What-it-does: moisturizer/humectant, solvent | Irritancy: 0 | Comedogenicity: 1

Butylene glycol, or let’s just call it BG, is a multi-tasking colorless, syrupy liquid. It’s a great pick for creating a nice feeling product.  

BG’s main job is usually to be a solvent for the other ingredients. Other tasks include helping the product to absorb faster and deeper into the skin (penetration enhancer), making the product spread nicely over the skin (slip agent), and attracting water (humectant) into the skin.

Niacinamide - superstar
Also-called: vitamin B3, nicotinamide | What-it-does: cell-communicating ingredient, skin brightening, anti-acne, moisturizer/humectant
  • A multi-functional skincare superstar with several proven benefits for the skin
  • Great anti-aging, wrinkle smoothing ingredient used at 4-5% concentration
  • Fades brown spots alone or in combination with amino sugar, acetyl glucosamine
  • Increases ceramide synthesis that results in a stronger, healthier skin barrier and better skin hydration
  • Can help to improve several skin conditions including acne, rosacea, and atopic dermatitis
Read all the geeky details about Niacinamide here >>

A fatty alcohol (the non-drying type with a long oil loving chain of 22 carbon atoms) that is used to increase the viscosity of the formula and it also helps the oily and the watery parts to stay nicely mixed together (called emulsion stabilizing). 

Also-called: Uvinul A Plus, DHHB | What-it-does: sunscreen

Diethylamino Hydroxybenzoyl Hexyl Benzoate is a new generation, chemical sunscreen agent (not available in the US due to impossible FDA regulations) that's designed for high UVA protection and high photostability. It gives sun protection in the whole UVA range (320-400 nm) with peak protection at 354nm. It can be used up to 10% worldwide except for the US and Canada. 

A copolymer is a big molecule that consists not of one but of two repeating subunits. This particular copolymer is a handy helper ingredient to form nice gel textures.

It usually comes to the formula combined with emollients (such as  C13-14 Isoparaffin, Isohexadecane, Isononyl Isononanoate or Squalane) and can be used as an emulsifier and/or thickener to produce milky gel emulsions with a soft and non-tacky skin feel. 

Also-called: Tinosorb S, Bemotrizinol | What-it-does: sunscreen

Its INCI name is a bit of a mouthful, but Bis-Ethylhexyloxyphenol Methoxyphenyl Triazine is worth recognizing it as it is one of the best sunscreen agents known today. Unfortunately, it's not FDA-approved so you will not find it in sunscreens coming from the US (not because it's not good, but because US regulations make it impossible for newer sunscreen agents to get approved), but it is widely available in other parts of the world like Europe, Australia or Asia. 

It is a broad-spectrum (covers the whole UVB and UVA range, 280-400 nm) chemical sunscreen agent with peak protections at about 310 and 345 nm and unlike older UV filters, it's very photostable. It hardly deteriorates in the presence of UV light and it's also useful in stabilizing other less stable sunscreen agents, like the famous UVA protector, avobenzone.

What-it-does: emollient, solvent

A light, velvety, unique skin feel liquid that is a good solvent and also makes the skin feel nice and smooth (aka emollient). It's often used in makeup products mixed with silicones to give shine and slip to the product. It's also great for cleansing dirt and oil from the skin as well as for taking off make-up.

A clear, light yellow liquid that is used to coat pigments (such as inorganic sunscreen agents or colorants) in cosmetic products.  The coating helps to stabilize pigments in the formulas and also helps them to spread easily and evenly on the skin. 

A common little helper ingredient that helps water and oil to mix together, aka emulsifier.

What-it-does: emulsifying, surfactant/cleansing | Irritancy: 0 | Comedogenicity: 0

A common little helper ingredient that helps water and oil to mix together, aka emulsifier. 

The number at the end refers to the oil-loving part and the bigger the number  the more emulsifying power it has. 20 is a weak emulsifier, rather called solubilizer used commonly in toners while 60 and 80 are more common in serums and creams.

Menthol - icky
What-it-does: soothing

Menthol needs no introduction: it's the thing that causes the cooling sensation so well-known both from cosmetic products as well as a bunch of other things like chocolate, chewing gum, toothpaste or cigarette. It's a natural compound that comes from the essential oil of Mentha species (peppermint oil contains 40-50% menthol) and it gives them their typical minty smell and flavor.

As for skincare, menthol seems to be a mixed bag. Apart from the cool cooling sensation (that might last up to 70 mins!), it also has painkilling, itch reducing, antibacterial, antifungal and even penetration enhancing properties. On the other hand, it also seems to act as a skin irritant that increases trans-epidermal water loss (the water that evaporates from the outer layer of the skin) and thus contributes to drying out the skin.

It's one of the most commonly used thickeners and emulsion stabilizers. If the product is too runny, a little xanthan gum will make it more gel-like. Used alone, it can make the formula sticky and it is a good team player so it is usually combined with other thickeners and so-called rheology modifiers (helper ingredients that adjust the flow and thus the feel of the formula). The typical use level of Xantha Gum is below 1%, it is usually in the 0.1-0.5% range. 

Btw, Xanthan gum is all natural, a chain of sugar molecules (polysaccharide) produced from individual sugar molecules (glucose and sucrose) via fermentation. It’s approved by Ecocert and also used in the food industry (E415). 

What-it-does: chelating

Super common little helper ingredient that helps products to remain nice and stable for a longer time. It does so by neutralizing the metal ions in the formula (that usually get into there from water) that would otherwise cause some not so nice changes.

It is typically used in tiny amounts, around 0.1% or less.

Also-called: Vitamin E Acetate | What-it-does: antioxidant | Irritancy: 0 | Comedogenicity: 0

It’s the most commonly used version of pure vitamin E in cosmetics. You can read all about the pure form here. This one is the so-called esterified version. 

According to famous dermatologist, Leslie Baumann while tocopheryl acetate is more stable and has a longer shelf life, it’s also more poorly absorbed by the skin and may not have the same awesome photoprotective effects as pure Vit E. 

Also-called: Butylated Hydroxy Toluene | What-it-does: antioxidant, preservative

It's the acronym for Butylated Hydroxy Toluene. It's a common synthetic antioxidant that's used as a preservative.

There is some controversy around BHT. It's not a new ingredient, it has been used both as a food and cosmetics additive since the 1970s. Plenty of studies tried to examine if it's a carcinogen or not. This Truth in Aging article details the situation and also writes that all these studies examine BHT when taken orally.

Tocopherol - goodie
Also-called: Vitamin E | What-it-does: antioxidant | Irritancy: 0-3 | Comedogenicity: 0-3
  • Primary fat-soluble antioxidant in our skin
  • Significant photoprotection against UVB rays
  • Vit C + Vit E work in synergy and provide great photoprotection
  • Has emollient properties
  • Easy to formulate, stable and relatively inexpensive
Read all the geeky details about Tocopherol here >>

Also-called: Aloe Leaf Extract | What-it-does: soothing, emollient, moisturizer/humectant

The extract coming from the juice containing leaves of the Aloe vera plant. It's usually a hydroglycolic extract (though  oil extract for the lipid parts also exists) that has similar moisturizing, emollient and anti-inflammatory properties as the juice itself. We have written some more about aloe here.

What-it-does: preservative

A helper ingredient that helps to make the products stay nice longer, aka preservative. It works mainly against fungi. 

It’s pH dependent and works best at acidic pH levels (3-5). It’s not strong enough to be used in itself so it’s always combined with something else, often with potassium sorbate.

What-it-does: preservative

It's one of those things that help your cosmetics not to go wrong too soon, aka a preservative. It’s not a strong one and doesn’t really work against bacteria, but more against mold and yeast. To do that it has to break down to its active form, sorbic acid. For that to happen, there has to be water in the product and the right pH value (pH 3-4). 

But even if everything is right, it’s not enough on its own. If you see potassium sorbate you should see some other preservative next to it too.

You may also want to take a look at...

what‑it‑does solvent
Normal (well kind of - it's purified and deionized) water. Usually the main solvent in cosmetic products. [more]
what‑it‑does antimicrobial/antibacterial | solvent | viscosity controlling
Alcohol with some additives to make it unconsumable. It is great solvent, penetration enhancer, creates cosmetically elegant, light formulas, great astringent, and antimicrobial. In large amounts, it can be very drying to the skin. [more]
what‑it‑does sunscreen
irritancy, com. 0, 1
A physical/inorganic sunscreen with the broadest spectrum (UVB and UVA II, less good at UVA I) protection available today. It also has good stability and also works as a skin protectant, anti-irritant. Might leave some whitish tint on the skin, though. [more]
what‑it‑does sunscreen
irritancy, com. 0, 0
Octinoxate - an old-school chemical sunscreen that absorbs UVB radiation (wavelengths: 280-320 nm). Not photostable and does not protect against UVA. [more]
what‑it‑does sunscreen
Uvinul T 150 - A new generation, chemical sunscreen (not available in the US due to impossible FDA regulations) that gives the highest photo-stable absorption of all available UVB filters today. [more]
what‑it‑does emulsifying
irritancy, com. 0, 0-1
A mainly oil loving molecule that helps water and oil to mix nicely, aka emulsifier. In itself, it can create water-in-oil emulsions (when water droplets are dispersed in oil), but it is used mostly next to water-loving emulsifiers to create nice and smooth oil-in-water creams.  It can also function as a wetting and dispersing agent helping insoluble particles such as color pigments [more]
what‑it‑does emollient
what‑it‑does emollient
what‑it‑does moisturizer/humectant | solvent
irritancy, com. 0, 1
An often used glycol that works as a solvent, humectant, penetration enhancer and also gives a good slip to the products. [more]
what‑it‑does cell-communicating ingredient | skin brightening | anti-acne | moisturizer/humectant
A multi-functional skincare superstar that has clinically proven anti-aging, skin lightening, anti-inflammatory and barrier repair properties. [more]
what‑it‑does emollient | viscosity controlling
A fatty alcohol (the non-drying type) that is used to increase the viscosity of the formula and stabilize emulsions. [more]
what‑it‑does sunscreen
Uvinul A Plus - A new generation, chemical sunscreen agent (not available in the US due to impossible FDA regulations) that's designed for high UVA protection and high photostability. [more]
what‑it‑does viscosity controlling
A big molecule used as a helper ingredient to form nice gel textures. [more]
what‑it‑does sunscreen
Tinosorb S - a new generation, broad-spectrum and very photostable sunscreen agent with great safety profile. [more]
what‑it‑does emollient | solvent
A light, velvety, unique skin feel liquid that is a good solvent and also makes the skin feel nice and smooth. [more]
A clear, light yellow liquid that is used to coat pigments (such as inorganic sunscreen agents or colorants) in cosmetic products.  [more]
what‑it‑does emulsifying | surfactant/cleansing
A common little helper ingredient that helps water and oil to mix together, aka emulsifier.
what‑it‑does emulsifying | surfactant/cleansing
irritancy, com. 0, 0
A common little helper ingredient that helps water and oil to mix together, aka emulsifier. [more]
what‑it‑does soothing
Menthol needs no introduction: it's the thing that causes the cooling sensation so well-known both from cosmetic products as well as a bunch of other things like chocolate, chewing gum, toothpaste or cigarette. It's a natural compound that comes from the essential oil of Mentha species (peppermint oil contains 40-50% menthol) and it gives them their typical minty smell a [more]
what‑it‑does viscosity controlling
A super commonly used thickener and emulsion stabilizer. [more]
what‑it‑does chelating
Super common little helper ingredient that helps products to remain nice and stable for a longer time. It does so by neutralizing the metal ions in the formula (that usually get into there from water) that would otherwise cause some not so nice changes. [more]
what‑it‑does antioxidant
irritancy, com. 0, 0
A form of vitamin E that works as an antioxidant. Compared to the pure form it's more stable, has longer shelf life, but it's also more poorly absorbed by the skin. [more]
what‑it‑does antioxidant | preservative
It's the acronym for Butylated Hydroxy Toluene. It's a common synthetic antioxidant that's used as a preservative.There is some controversy around BHT. [more]
what‑it‑does antioxidant
irritancy, com. 0-3, 0-3
Pure Vitamin E. Great antioxidant that gives significant photoprotection against UVB rays. Works in synergy with Vitamin C. [more]
what‑it‑does soothing | emollient | moisturizer/humectant
The extract coming from the juice containing leaves of the Aloe vera plant with moisturizing, emollient and anti-inflammatory properties. [more]
what‑it‑does preservative
A preservative that works mainly against fungi. Has to be combined with other preservatives. [more]
what‑it‑does preservative
A not so strong preservative that doesn’t really work against bacteria, but more against mold and yeast. [more]