Follow us on our new Insta page »
Serium Paris Face Serum With Pure Gold

Face Serum With Pure Gold

Face serum with pure gold
Uploaded by: pinkie on

Serium Paris Face Serum With Pure Gold
Ingredients explained

Also-called: Water | What-it-does: solvent

Good old water, aka H2O. The most common skincare ingredient of all. You can usually find it right in the very first spot of the ingredient list, meaning it’s the biggest thing out of all the stuff that makes up the product. 

It’s mainly a solvent for ingredients that do not like to dissolve in oils but rather in water. 

Once inside the skin, it hydrates, but not from the outside - putting pure water on the skin (hello long baths!) is drying. 

One more thing: the water used in cosmetics is purified and deionized (it means that almost all of the mineral ions inside it is removed). Like this, the products can stay more stable over time. 

Glycerin - superstar
Also-called: Glycerol | What-it-does: skin-identical ingredient, moisturizer/humectant | Irritancy: 0 | Comedogenicity: 0
  • A natural moisturizer that’s also in our skin
  • A super common, safe, effective and cheap molecule used for more than 50 years
  • Not only a simple moisturizer but knows much more: keeps the skin lipids between our skin cells in a healthy (liquid crystal) state, protects against irritation, helps to restore barrier
  • Effective from as low as 3% with even more benefits at higher concentrations up to 20-40% (around 10% is a good usability-effectiveness sweet spot)
  • High-glycerin moisturizers are awesome for treating severely dry skin
Read all the geeky details about Glycerin here >>

Also-called: Ci 77480 | What-it-does: colorant

We don't have description for this ingredient yet.

What-it-does: preservative

A helper ingredient that helps to make the products stay nice longer, aka preservative. It works mainly against fungi. 

It’s pH dependent and works best at acidic pH levels (3-5). It’s not strong enough to be used in itself so it’s always combined with something else, often with potassium sorbate.

It's one of the most commonly used thickeners and emulsion stabilizers. If the product is too runny, a little xanthan gum will make it more gel-like. Used alone, it can make the formula sticky and it is a good team player so it is usually combined with other thickeners and so-called rheology modifiers (helper ingredients that adjust the flow and thus the feel of the formula). The typical use level of Xantha Gum is below 1%, it is usually in the 0.1-0.5% range. 

Btw, Xanthan gum is all natural, a chain of sugar molecules (polysaccharide) produced from individual sugar molecules (glucose and sucrose) via fermentation. It’s approved by Ecocert and also used in the food industry (E415). 

What-it-does: solvent

A really multi-functional helper ingredient that can do several things in a skincare product: it can bring a soft and pleasant feel to the formula, it can act as a humectant and emollient, it can be a solvent for some other ingredients (for example it can help to stabilize perfumes in watery products) and it can also help to disperse pigments more evenly in makeup products. And that is still not all: it can also boost the antimicrobial activity of preservatives

Lecithin - goodie
What-it-does: emollient, emulsifying

A very common ingredient that can be found in all cell membranes. In cosmetics it's quite the multi-tasker: it's an emollient and water-binding ingredient but it's also an emulsifier and can be used for stabilization purposes. It's also often used to create liposomes

What-it-does: moisturizer/humectant

Soluble Collagen refers to the big, natural collagen molecules mostly extracted from fish or bovine skin. Spotting collagen on the ingredient list, you might think that, aha, this must be there to supplement the collagen content of our own skin, but you have to know that collagen is a huge-huge molecule that cannot absorb to the middle layer of the skin where collagen is and even if it could, it cannot just magically go the right places to become part of the skin's own collagen network. Putting collagen on your skin for anti-aging purposes is like throwing tent poles onto a ramshackle tent and expecting the tent to magically become nice and firm again. 

The strong point of collagen is being a large molecule with tremendous water binding capacity, i.e. an amazing humectant and moisturizer. It produces a water-rich film on the skin giving the stratum corneum (the uppermost layer of the skin) great hydration, making it nice and smooth and reducing trans-epidermal-water loss (the process of water evaporating out of your skin). 

It is also so gentle and non-irritant that it can actually be used in cleansers to reduce the irritating potential of harsh surfactants, aka cleansing agents. 

If you are fine with animal-derived ingredients and know that collagen in a jar has nothing to do with wrinkles but everything to do with skin hydration, Soluble Collagen is a nice ingredient. 

 

Adenosine - goodie

Adenosine is an important little compound in our body that has a vital cell-signalling role. Research on smearing it on our face is also promising and shows so far a couple of things:

  • It can help with wound healing
  • It’s a good anti-inflammatory agent
  • It might even help with skin’s own collagen production and improve skin firmness and elasticity
  • It helps with barrier repair and protection
  • It might be even useful for the hair helping with hair thickness and hair growth
What-it-does: skin-identical ingredient, moisturizer/humectant | Irritancy: 0 | Comedogenicity: 0

It’s the - sodium form - cousin of the famous NMFhyaluronic acid (HA). If HA does not tell you anything we have a super detailed, geeky explanation about it here.  The TL; DR version of HA is that it's a huge polymer (big molecule from repeated subunits) found in the skin that acts as a sponge helping the skin to hold onto water, being plump and elastic. HA is famous for its crazy water holding capacity as it can bind up to 1000 times its own weight in water.

As far as skincare goes, sodium hyaluronate and hyaluronic acid are pretty much the same and the two names are used interchangeably. As cosmetic chemist kindofstephen writes on reddit  "sodium hyaluronate disassociates into hyaluronic acid molecule and a sodium atom in solution". 

In spite of this, if you search for "hyaluronic acid vs sodium hyaluronate" you will find on multiple places that sodium hyaluronate is smaller and can penetrate the skin better. Chemically, this is definitely not true, as the two forms are almost the same, both are polymers and the subunits can be repeated in both forms as much as you like. (We also checked Prospector for sodium hyaluronate versions actually used in cosmetic products and found that the most common molecular weight was 1.5-1.8 million Da that absolutely counts as high molecular weight).

What seems to be a true difference, though, is that the salt form is more stable, easier to formulate and cheaper so it pops up more often on the ingredient lists. 

If you wanna become a real HA-and-the-skin expert you can read way more about the topic at hyaluronic acid (including penetration-questions, differences between high and low molecular weight versions and a bunch of references to scientific literature).

What-it-does: buffering

Citric acid comes from citrus fruits and is an AHA. If these magic three letters don’t tell you anything, click here and read our detailed description on glycolic acid, the most famous AHA. 

So citric acid is an exfoliant, that can - just like other AHAs - gently lift off the dead skin cells of your skin and make it more smooth and fresh. 

There is also some research showing that citric acid with regular use (think three months and 20% concentration) can help sun-damaged skin, increase skin thickness and some nice hydrating things called glycosaminoglycans in the skin. 

But according to a comparative study done in 1995, citric acid has less skin improving magic properties than glycolic or lactic acid. Probably that’s why citric acid is usually not used as an exfoliant but more as a helper ingredient in small amounts to adjust the pH of a formulation. 

What-it-does: emollient, soothing

We don't have description for this ingredient yet.

We don't have description for this ingredient yet.

Also-called: Sea Water | What-it-does: moisturizer/humectant, solvent

We don't have description for this ingredient yet.

We don't have description for this ingredient yet.

Also-called: lye | What-it-does: buffering

The unfancy name for it is lye. It’s a solid white stuff that’s very alkaline and used in small amounts to adjust the pH of the product and make it just right. 

For example, in case of AHA or BHA exfoliants, the right pH is super-duper important, and pH adjusters like sodium hydroxide are needed.  

BTW, lye is not something new. It was already used by ancient Egyptians to help oil and fat magically turn into something else. Can you guess what? Yes, it’s soap. It still often shows up in the ingredient list of soaps and other cleansers.

Sodium hydroxide in itself is a potent skin irritant, but once it's reacted (as it is usually in skin care products, like exfoliants) it is totally harmless.

What-it-does: sunscreen, colorant

Titanium Dioxide is one of the two members of the elite sunscreen group called physical sunscreens (or inorganic sunscreens if you’re a science geek and want to be precise).

Traditionally, UV-filters are categorized as either chemical or physical. The big difference is supposed to be that chemical agents absorb UV-light while physical agents reflect it like a bunch of mini umbrellas on top of the skin. While this categorization is easy and logical it turns out it's not true. A recent, 2016 study shows that inorganic sunscreens work mostly by absorption, just like chemical filters, and only a little bit by reflection (they do reflect the light in the visible spectrum, but mostly absorb in the UV spectrum).

Anyway, it doesn't matter if it reflects or absorbs, Titanium Dioxide is a pretty awesome sunscreen agent for two main reasons: it gives a nice broad spectrum coverage and it's highly stable. Its protection is very good between 290 - 350 nm (UVB and UVA II range), and less good at 350-400 nm (UVA I) range. Regular sized Titanium Dioxide also has a great safety profile, it's non-irritating and is pretty much free from any health concerns (like estrogenic effect worries with some chemical filters).

The disadvantage of Titanium Dioxide is that it's not cosmetically elegant, meaning it's a white, "unspreadable" mess. Sunscreens containing Titanium Dioxide are often hard to spread on the skin and they leave a disturbing whitish tint. The cosmetic industry is, of course, really trying to solve this problem and the best solution so far is using nanoparticles. The itsy-bitsy Nano-sized particles improve both spreadability and reduce the whitish tint a lot, but unfortunately, it also introduces new health concerns. 

The main concern with nanoparticles is that they are so tiny that they are absorbed into the skin more than we want them (ideally sunscreen should remain on the surface of the skin). Once absorbed they might form unwanted complexes with proteins and they might promote the formation of evil free radicals. But do not panic, these are concerns under investigation. A 2009 review article about the safety of nanoparticles summarizes this, "to date, in-vivo and in-vitro studies have not demonstrated percutaneous penetration of nanosized particles in titanium dioxide and zinc oxide sunscreens". The English translation is, so far it looks like sunscreens with nanoparticles do stay on the surface of the skin where they should be.  

All in all, Titanium Dioxide is a famous sunscreen agent and for good reason, it gives broad spectrum UV protection (best at UVB and UVA II), it's highly stable, and it has a good safety profile. It's definitely one of the best UV-filter agents we have today, especially in the US where new-generation Tinosorb filters are not (yet) approved. 

Also-called: Iron Oxide Red | What-it-does: colorant | Irritancy: 0 | Comedogenicity: 0

Red Iron Oxide is the super common pigment that gives the familiar, "rust" red color. It is also the one that gives the pink tones in your foundation. Chemically speaking, it is iron III oxide (Fe2O3). 

It’s a handy multi-tasking ingredient that gives the skin a nice, soft feel. At the same time, it also boosts the effectiveness of other preservatives, such as the nowadays super commonly used phenoxyethanol

The blend of these two (caprylyl glycol + phenoxyethanol) is called Optiphen, which not only helps to keep your cosmetics free from nasty things for a long time but also gives a good feel to the finished product. It's a popular duo.

What-it-does: chelating, buffering

A little helper ingredient that is used to adjust the pH of the product. It also helps to keep products stay nice longer by neutralizing the metal ions in the formula (they usually come from water). 

Also-called: CI 77019 | What-it-does: colorant

A super versatile and common mineral powder that comes in different particle sizes. It is a multi-tasker used to improve skin feel, increase product slip, give the product light-reflecting properties, enhance skin adhesion or serve as an anti-caking agent.

It is also the most commonly used "base" material for layered composite pigments such as pearl-effect pigments. In this case, mica is coated with one or more metal oxides (most commonly titanium dioxide) to achieve pearl effect via the physical phenomenon known as interference. 

What-it-does: solvent, emulsifying, perfuming, surfactant/cleansing | Irritancy: 0-1 | Comedogenicity: 0-2

Similar to other glycols, it's a helper ingredient used as a solvent, or to thin out thick formulas and make them more nicely spreadable. 

Hexylene Glycol is also part a preservative blend named Lexgard® HPO, where it helps the effectiveness of current IT-preservative, phenoxyethanol

What-it-does: moisturizer/humectant, solvent, viscosity controlling | Irritancy: 0 | Comedogenicity: 1

Butylene glycol, or let’s just call it BG, is a multi-tasking colorless, syrupy liquid. It’s a great pick for creating a nice feeling product.  

BG’s main job is usually to be a solvent for the other ingredients. Other tasks include helping the product to absorb faster and deeper into the skin (penetration enhancer), making the product spread nicely over the skin (slip agent), and attracting water (humectant) into the skin.

It’s an ingredient whose safety hasn’t been questioned so far by anyone (at least not that we know about). BG is approved by Ecocert and is also used enthusiastically in natural products. BTW, it’s also a food additive. 

A little helper ingredient that works as a preservative. It works against bacteria and some species of fungi and yeast. It's often combined with IT-preservative, phenoxyethanol.

We don't have description for this ingredient yet.

Linalool - icky
What-it-does: perfuming, deodorant

Linalool is a super common fragrance ingredient. It’s kind of everywhere - both in plants and in cosmetic products. It’s part of 200 natural oils including lavender, ylang-ylang, bergamot, jasmine, geranium and it can be found in 90-95% of prestige perfumes on the market. 

The problem with linalool is, that just like limonene it oxidises on air exposure and becomes allergenic. That’s why a product containing linalool that has been opened for several months is more likely to be allergenic than a fresh one.

A study made in the UK with 483 people tested the allergic reaction to 3% oxidised linalool and 2.3% had positive test results. 

What-it-does: perfuming

A common fragrance ingredient that smells like jasmine. It is one of the “EU 26 fragrances” that has to be labelled separately because of allergen potential. Best to avoid if your skin is sensitive.

What-it-does: perfuming

It’s a common fragrance ingredient that has a light floral smell.  It’s one of the “EU 26 fragrances” that has to be labelled separately (and cannot be simply included in the term “fragrance/perfume” on the label) because of allergen potential. Best to avoid if your skin is sensitive.

Also-called: Fragrance, Parfum;Parfum/Fragrance | What-it-does: perfuming

Exactly what it sounds: nice smelling stuff put into cosmetic products so that the end product also smells nice. Fragrance in the US and parfum in the EU is a generic term on the ingredient list that is made up of 30 to 50 chemicals on average (but it can have as much as 200 components!). 

If you are someone who likes to know what you put on your face then fragrance is not your best friend - there's no way to know what’s really in it.  

Also, if your skin is sensitive, fragrance is again not your best friend. It’s the number one cause of contact allergy to cosmetics. It’s definitely a smart thing to avoid with sensitive skin (and fragrance of any type - natural is just as allergic as synthetic, if not worse!). 

You may also want to take a look at...

what‑it‑does solvent
Normal (well kind of - it's purified and deionized) water. Usually the main solvent in cosmetic products. [more]
what‑it‑does skin-identical ingredient | moisturizer/humectant
irritancy, com. 0, 0
A real oldie but a goodie. Great natural moisturizer and skin-identical ingredient that plays an important role in skin hydration and general skin health. [more]
what‑it‑does colorant
what‑it‑does preservative
A preservative that works mainly against fungi. Has to be combined with other preservatives. [more]
what‑it‑does viscosity controlling
A super commonly used thickener and emulsion stabilizer. [more]
what‑it‑does solvent
A multi-functional helper ingredient that acts as a humectant and emollient. It's also a solvent and can boost the effectiveness of preservatives. [more]
what‑it‑does emollient | emulsifying
It's quite the multi-tasker: an emollient and water-binding ingredient but also an emulsifier and can be used for stabilization purposes. It's also often used to create liposomes.  [more]
what‑it‑does moisturizer/humectant
Soluble Collagen refers to the big, natural collagen molecules mostly extracted from fish or bovine skin. Spotting collagen on the ingredient list, you might think that, aha, this must be there to supplement the collagen content of our own skin, but you have to know that collagen is a huge-huge molecule  [more]
what‑it‑does cell-communicating ingredient
An important compound in our body that has a vital cell-signalling role. It is wound healing, anti-inflammatory and can help with barrier repair. [more]
what‑it‑does skin-identical ingredient | moisturizer/humectant
irritancy, com. 0, 0
It's the salt form of famous humectant and natural moisturizing factor, hyaluronic acid. It can bind huge amounts of water and it's pretty much the current IT-moisturizer. [more]
what‑it‑does buffering
An AHA that comes from citrus fruits. It is usually used as a helper ingredient to adjust the pH of the formula. [more]
what‑it‑does emollient | soothing
what‑it‑does moisturizer/humectant | solvent
what‑it‑does buffering
Lye - A solid white stuff that’s very alkaline and used in small amount to adjust the pH of the product.  [more]
what‑it‑does sunscreen | colorant
A physical/inorganic sunscreen with pretty broad spectrum (UVB and UVA II, less good at UVA I) protection and good stability. Might leave some whitish tint on the skin, though. [more]
what‑it‑does colorant
irritancy, com. 0, 0
Iron Oxide - a super common colorant with the color red.  [more]
what‑it‑does moisturizer/humectant | emollient
A handy multi-tasking ingredient that gives the skin a nice, soft feel and also boosts the effectiveness of other preservatives. [more]
what‑it‑does chelating | buffering
A helper ingredient that is used to adjust the pH of the product. Also helps to keep products stay nice longer by neutralizing the metal ions in the formula. 
what‑it‑does colorant
A mineral powder used to improve skin feel, increase product slip, give the product some light-reflecting properties, enhance skin adhesion or serve as an anti-caking agent. A real multi-tasker. [more]
what‑it‑does solvent | emulsifying | perfuming | surfactant/cleansing
irritancy, com. 0-1, 0-2
Similar to other glycols, it's a helper ingredient used as a solvent, or to thin out thick formulas and make them more nicely spreadable.  Hexylene Glycol is also part a preservative blend named Lexgard® [more]
what‑it‑does moisturizer/humectant | solvent | viscosity controlling
irritancy, com. 0, 1
An often used glycol that works as a solvent, humectant, penetration enhancer and also gives a good slip to the products. [more]
what‑it‑does preservative | antimicrobial/antibacterial
A little helper ingredient that works as a preservative. It works against bacteria and some species of fungi and yeast. [more]
what‑it‑does viscosity controlling
what‑it‑does perfuming
A super common fragrance ingredient that can be found among others in lavender, ylang-ylang, bergamot or jasmine. The downside of it is that it oxidises on air exposure and might become allergenic. [more]
what‑it‑does perfuming
A common fragrance ingredient that smells like jasmine. It is one of the “EU 26 fragrances” that has to be labelled separately because of allergen potential. [more]
what‑it‑does perfuming
It’s a common fragrance ingredient that has a light floral smell.  It’s one of the “EU 26 fragrances” that has to be labelled separately (and cannot be simply included in the term “fragrance/perfume” [more]
what‑it‑does perfuming
The generic term for nice smelling stuff put into cosmetic products so that the end product also smells nice. It is made up of 30 to 50 chemicals on average. [more]