Missha All Around Safe Block Sebum Zero Sun Spf 50+/Pa+++
Missha

All Around Safe Block Sebum Zero Sun Spf 50+/Pa+++

Get shine-free sun protection with this lightweight, waterproof sunscreen.
Uploaded by: savthyskin on 30/05/2018

Ingredients overview

Water
what‑it‑does solvent
Normal (well kind of - it's purified and deionized) water. Usually the main solvent in cosmetic products. [more]
,
Cyclopentasiloxane
what‑it‑does emollient | solvent
It's a super commonly used water-thin volatile silicone that gives skin and hair a silky, smooth feel.  [more]
,
Dipropylene Glycol
what‑it‑does solvent | viscosity controlling
A clear, colorless liquid that works as a solvent and viscosity decreasing ingredient. 
,
Zinc Oxide
what‑it‑does sunscreen
A physical/inorganic sunscreen with the broadest spectrum (UVB and UVA II, less good at UVA I) protection available today. It also has good stability and also works as a skin protectant, anti-irritant. Might leave some whitish tint on the skin, though. [more]
,
Titanium Dioxide (Ci 77891)
what‑it‑does sunscreen
A physical/inorganic sunscreen with pretty broad spectrum (UVB and UVA II, less good at UVA I) protection and good stability. Might leave some whitish tint on the skin, though. [more]
,
Peg-10 Dimethicone
what‑it‑does emulsifying
A silicone emulsifier that helps water and silicone oils to mix nicely together. [more]
,
Dicaprylyl Carbonate
what‑it‑does emollient
A clear, colorless, almost odorless oil that spreads nicely and easily and gives a velvet dry skin feel. It is good friends with sunscreen agents and helps to solubilize them.
,
Styrene/Acrylates Copolymer
A film-forming polymer (big molecule from repeated subunits) to create water-resistant sunscreen formulas.  [more]
,
Dimethicone
what‑it‑does emollient
irritancy, com. 0 1
A very common silicone that gives both skin and hair a silky smooth feel. It also forms a protective barrier on the skin and fills in fine lines. Also used for scar treatment. [more]
, [more]
Butylene Glycol
what‑it‑does moisturizer/humectant | solvent
irritancy, com. 0 1
An often used glycol that works as a solvent, humectant, penetration enhancer and also gives a good slip to the products. [more]
,
Silica
what‑it‑does viscosity controlling | abrasive/scrub
A white powdery thing that can mattify the skin and thicken up cosmetic products. [more]
,
Sodium Chloride
what‑it‑does viscosity controlling
Sodium chloride is the fancy name of salt. Normal, everyday table salt. It’s a common little helper ingredient in cosmetics that helps to increase the volume of a product (bulking), to disguise any unpleasant smell (masking) or to thicken up a formula (viscosity controlling). [more]
,
Acrylates/Dimethicone Copolymer
A polymer molecule (big molecule from repeated subunits) whose main thing is being a film-former.It is often dissolved in a volatile carrier fluid that evaporates from the skin leaving a nice, flexible film with great water, oil and abrasion resistance, oxygen permeability, and long-lasting cosmetic effect. [more]
,
Vp/Hexadecene Copolymer
what‑it‑does viscosity controlling
,
Camellia Sinensis Leaf Water, Melaleuca Alternifolia (Tea Tree) Flower/Leaf/Stem Extract, Limonia Acidissima Extract, Rosa Davurica Bud Extract
what‑it‑does antioxidant
,
Cyclohexasiloxane
what‑it‑does emollient | solvent
A light-feeling, volatile silicone that gives skin a unique, silky and non-greasy feel. It has excellent spreading properties and leaves no oily residue or build-up. 
,
Cetyl Peg/Ppg-10/1 Dimethicone
what‑it‑does emulsifying | surfactant/cleansing
A silicone emulsifier that helps water and silicone oils to mix nicely together. 
,
Disteardimonium Hectorite
what‑it‑does viscosity controlling
An organic derivative of hectorite clay, Disteardimonium Hectorite is used as a viscosity controller - it thickens up formulations to make them less runny.It’s most popular use in cosmetics is in sunscreens, under the trademarked name Bentone 38 from Elementis. [more]
,
Sorbitan Olivate
what‑it‑does emulsifying
An ester coming from sorbitol and the fatty acids of olive oil. It often comes to the formula coupled with Cetearyl Olivate and the two together help water and oil to blend (emulsifier). It's a natural and Ecocert approved duo.
,
Sorbitan Sesquioleate
what‑it‑does emulsifying
,
Beeswax
what‑it‑does emollient | emulsifying | viscosity controlling
The yellow solid stuff produced by honey bees to build their honeycomb. As for skincare, it's used as an emollient and thickening agent. [more]
,
Aluminum Hydroxide
what‑it‑does emollient | moisturizer/humectant | viscosity controlling
Officially, CosIng (the official EU ingredient database) lists Aluminum Hydroxide 's functions as opacifying (making the product white and non-transparent), as well as emollient and skin protectant.However, with a little bit of digging, it turns out Aluminum Hyroxide often moonlights as a protective coating for UV filter superstar Titanium Dioxide. [more]
,
Stearic Acid
what‑it‑does emulsifying | emollient | viscosity controlling
irritancy, com. 0 2
A common multi-tasker fatty acid that works as an emollient, emulsifier and thickener. [more]
,
Peg-8 Laurate
what‑it‑does emulsifying | surfactant/cleansing
,
Dimethicone/Vinyl Dimethicone Crosspolymer
what‑it‑does viscosity controlling
A white, elastomeric silicone powder that gives a nice silky and powdery feel to the products. [more]
,
Hydrogen Dimethicone
A silicone molecule that is half-way between Dimethicone and Methicone, meaning that some of the methyl (-CH3) groups are replaced with a hydrogen atom (in Methicone half of the CH3 groups are replaced). [more]
,
Polyhydroxystearic Acid
what‑it‑does emulsifying
A dispersing agent that's used in inorganic (titanium dioxide/zinc oxide based) sunscreens or in make-up products to help to distribute the pigments nicely and evenly on the skin. [more]
,
Triethoxycaprylylsilane
A clear, light yellow liquid that is used to coat pigments (such as inorganic sunscreen agents or colorants) in cosmetic products.  [more]
,
Tocopheryl Acetate
what‑it‑does antioxidant
irritancy, com. 0 0
A form of vitamin E that works as an antioxidant. Compared to the pure form it's more stable, has longer shelf life, but it's also more poorly absorbed by the skin. [more]
,
Sodium Benzoate
what‑it‑does preservative
A preservative that works mainly against fungi. Has to be combined with other preservatives. [more]
,
Isopropyl Palmitate
what‑it‑does emollient
irritancy, com. 1 4
A clear, colorless emollient ester (oily liquid) that makes the skin nice and smooth. [more]
,
Isostearic Acid
what‑it‑does surfactant/cleansing | emulsifying
A liquid fatty acid with great odour, thermal and oxidation stability. It's great for the stabilization of pigments and mineral particles in oils and solvents. [more]
,
Lecithin
what‑it‑does emollient | emulsifying
It's quite the multi-tasker: an emollient and water-binding ingredient but also an emulsifier and can be used for stabilization purposes. It's also often used to create liposomes.  [more]
,
Ethylhexyl Palmitate
what‑it‑does emollient
irritancy, com. 0 4
A super common, medium-spreading emollient ester that gives richness to the formula and a mild feel during rubout. [more]
,
Potassium Sorbate
what‑it‑does preservative
A not so strong preservative that doesn’t really work against bacteria, but more against mold and yeast. [more]
,
Polyglyceryl-3 Polyricinoleate
what‑it‑does emulsifying | viscosity controlling
A plant based ingredient that helps water to mix with oil (aka W/O emulsifier).  It's especially good for soft to low-viscosity water-in-oil emulsions with non-greasy, pleasant skin feel like lip balms or thick body butters.
,
Disodium Edta
what‑it‑does chelating | viscosity controlling
Super common little helper ingredient that helps products to remain nice and stable for a longer time. It does so by neutralizing the metal ions in the formula (that usually get into there from water) that would otherwise cause some not so nice changes. [more]
,
Phenoxyethanol
what‑it‑does preservative
Pretty much the current IT-preservative. It’s safe and gentle, and can be used up to 1% worldwide. [more]
,
Fragrance
what‑it‑does perfuming
The generic term for nice smelling stuff put into cosmetic products so that the end product also smells nice. It is made up of 30 to 50 chemicals on average. [more]
[less]

Highlights

Key Ingredients

Antioxidant: Rosa Davurica Bud Extract
what‑it‑does antioxidant
,
Tocopheryl Acetate
what‑it‑does antioxidant
irritancy, com. 0 0
A form of vitamin E that works as an antioxidant. Compared to the pure form it's more stable, has longer shelf life, but it's also more poorly absorbed by the skin. [more]
Sunscreen: Zinc Oxide
what‑it‑does sunscreen
A physical/inorganic sunscreen with the broadest spectrum (UVB and UVA II, less good at UVA I) protection available today. It also has good stability and also works as a skin protectant, anti-irritant. Might leave some whitish tint on the skin, though. [more]
,
Titanium Dioxide (Ci 77891)
what‑it‑does sunscreen
A physical/inorganic sunscreen with pretty broad spectrum (UVB and UVA II, less good at UVA I) protection and good stability. Might leave some whitish tint on the skin, though. [more]

Show all ingredients by function

Other Ingredients

Abrasive/scrub: Silica
what‑it‑does viscosity controlling | abrasive/scrub
A white powdery thing that can mattify the skin and thicken up cosmetic products. [more]
Chelating: Disodium Edta
what‑it‑does chelating | viscosity controlling
Super common little helper ingredient that helps products to remain nice and stable for a longer time. It does so by neutralizing the metal ions in the formula (that usually get into there from water) that would otherwise cause some not so nice changes. [more]
Emollient: Cyclopentasiloxane
what‑it‑does emollient | solvent
It's a super commonly used water-thin volatile silicone that gives skin and hair a silky, smooth feel.  [more]
,
Dicaprylyl Carbonate
what‑it‑does emollient
A clear, colorless, almost odorless oil that spreads nicely and easily and gives a velvet dry skin feel. It is good friends with sunscreen agents and helps to solubilize them.
,
Dimethicone
what‑it‑does emollient
irritancy, com. 0 1
A very common silicone that gives both skin and hair a silky smooth feel. It also forms a protective barrier on the skin and fills in fine lines. Also used for scar treatment. [more]
,
Cyclohexasiloxane
what‑it‑does emollient | solvent
A light-feeling, volatile silicone that gives skin a unique, silky and non-greasy feel. It has excellent spreading properties and leaves no oily residue or build-up. 
,
Beeswax
what‑it‑does emollient | emulsifying | viscosity controlling
The yellow solid stuff produced by honey bees to build their honeycomb. As for skincare, it's used as an emollient and thickening agent. [more]
,
Aluminum Hydroxide
what‑it‑does emollient | moisturizer/humectant | viscosity controlling
Officially, CosIng (the official EU ingredient database) lists Aluminum Hydroxide 's functions as opacifying (making the product white and non-transparent), as well as emollient and skin protectant.However, with a little bit of digging, it turns out Aluminum Hyroxide often moonlights as a protective coating for UV filter superstar Titanium Dioxide. [more]
,
Stearic Acid
what‑it‑does emulsifying | emollient | viscosity controlling
irritancy, com. 0 2
A common multi-tasker fatty acid that works as an emollient, emulsifier and thickener. [more]
,
Isopropyl Palmitate
what‑it‑does emollient
irritancy, com. 1 4
A clear, colorless emollient ester (oily liquid) that makes the skin nice and smooth. [more]
,
Lecithin
what‑it‑does emollient | emulsifying
It's quite the multi-tasker: an emollient and water-binding ingredient but also an emulsifier and can be used for stabilization purposes. It's also often used to create liposomes.  [more]
,
Ethylhexyl Palmitate
what‑it‑does emollient
irritancy, com. 0 4
A super common, medium-spreading emollient ester that gives richness to the formula and a mild feel during rubout. [more]
Emulsifying: Peg-10 Dimethicone
what‑it‑does emulsifying
A silicone emulsifier that helps water and silicone oils to mix nicely together. [more]
,
Cetyl Peg/Ppg-10/1 Dimethicone
what‑it‑does emulsifying | surfactant/cleansing
A silicone emulsifier that helps water and silicone oils to mix nicely together. 
,
Sorbitan Olivate
what‑it‑does emulsifying
An ester coming from sorbitol and the fatty acids of olive oil. It often comes to the formula coupled with Cetearyl Olivate and the two together help water and oil to blend (emulsifier). It's a natural and Ecocert approved duo.
,
Sorbitan Sesquioleate
what‑it‑does emulsifying
,
Beeswax
what‑it‑does emollient | emulsifying | viscosity controlling
The yellow solid stuff produced by honey bees to build their honeycomb. As for skincare, it's used as an emollient and thickening agent. [more]
,
Stearic Acid
what‑it‑does emulsifying | emollient | viscosity controlling
irritancy, com. 0 2
A common multi-tasker fatty acid that works as an emollient, emulsifier and thickener. [more]
,
Peg-8 Laurate
what‑it‑does emulsifying | surfactant/cleansing
,
Polyhydroxystearic Acid
what‑it‑does emulsifying
A dispersing agent that's used in inorganic (titanium dioxide/zinc oxide based) sunscreens or in make-up products to help to distribute the pigments nicely and evenly on the skin. [more]
,
Isostearic Acid
what‑it‑does surfactant/cleansing | emulsifying
A liquid fatty acid with great odour, thermal and oxidation stability. It's great for the stabilization of pigments and mineral particles in oils and solvents. [more]
,
Lecithin
what‑it‑does emollient | emulsifying
It's quite the multi-tasker: an emollient and water-binding ingredient but also an emulsifier and can be used for stabilization purposes. It's also often used to create liposomes.  [more]
,
Polyglyceryl-3 Polyricinoleate
what‑it‑does emulsifying | viscosity controlling
A plant based ingredient that helps water to mix with oil (aka W/O emulsifier).  It's especially good for soft to low-viscosity water-in-oil emulsions with non-greasy, pleasant skin feel like lip balms or thick body butters.
Moisturizer/humectant: Butylene Glycol
what‑it‑does moisturizer/humectant | solvent
irritancy, com. 0 1
An often used glycol that works as a solvent, humectant, penetration enhancer and also gives a good slip to the products. [more]
,
Aluminum Hydroxide
what‑it‑does emollient | moisturizer/humectant | viscosity controlling
Officially, CosIng (the official EU ingredient database) lists Aluminum Hydroxide 's functions as opacifying (making the product white and non-transparent), as well as emollient and skin protectant.However, with a little bit of digging, it turns out Aluminum Hyroxide often moonlights as a protective coating for UV filter superstar Titanium Dioxide. [more]
Perfuming: Fragrance
what‑it‑does perfuming
The generic term for nice smelling stuff put into cosmetic products so that the end product also smells nice. It is made up of 30 to 50 chemicals on average. [more]
Preservative: Sodium Benzoate
what‑it‑does preservative
A preservative that works mainly against fungi. Has to be combined with other preservatives. [more]
,
Potassium Sorbate
what‑it‑does preservative
A not so strong preservative that doesn’t really work against bacteria, but more against mold and yeast. [more]
,
Phenoxyethanol
what‑it‑does preservative
Pretty much the current IT-preservative. It’s safe and gentle, and can be used up to 1% worldwide. [more]
Solvent: Water
what‑it‑does solvent
Normal (well kind of - it's purified and deionized) water. Usually the main solvent in cosmetic products. [more]
,
Cyclopentasiloxane
what‑it‑does emollient | solvent
It's a super commonly used water-thin volatile silicone that gives skin and hair a silky, smooth feel.  [more]
,
Dipropylene Glycol
what‑it‑does solvent | viscosity controlling
A clear, colorless liquid that works as a solvent and viscosity decreasing ingredient. 
,
Butylene Glycol
what‑it‑does moisturizer/humectant | solvent
irritancy, com. 0 1
An often used glycol that works as a solvent, humectant, penetration enhancer and also gives a good slip to the products. [more]
,
Cyclohexasiloxane
what‑it‑does emollient | solvent
A light-feeling, volatile silicone that gives skin a unique, silky and non-greasy feel. It has excellent spreading properties and leaves no oily residue or build-up. 
Surfactant/cleansing: Cetyl Peg/Ppg-10/1 Dimethicone
what‑it‑does emulsifying | surfactant/cleansing
A silicone emulsifier that helps water and silicone oils to mix nicely together. 
,
Peg-8 Laurate
what‑it‑does emulsifying | surfactant/cleansing
,
Isostearic Acid
what‑it‑does surfactant/cleansing | emulsifying
A liquid fatty acid with great odour, thermal and oxidation stability. It's great for the stabilization of pigments and mineral particles in oils and solvents. [more]
Viscosity controlling: Dipropylene Glycol
what‑it‑does solvent | viscosity controlling
A clear, colorless liquid that works as a solvent and viscosity decreasing ingredient. 
,
Silica
what‑it‑does viscosity controlling | abrasive/scrub
A white powdery thing that can mattify the skin and thicken up cosmetic products. [more]
,
Sodium Chloride
what‑it‑does viscosity controlling
Sodium chloride is the fancy name of salt. Normal, everyday table salt. It’s a common little helper ingredient in cosmetics that helps to increase the volume of a product (bulking), to disguise any unpleasant smell (masking) or to thicken up a formula (viscosity controlling). [more]
,
Vp/Hexadecene Copolymer
what‑it‑does viscosity controlling
,
Disteardimonium Hectorite
what‑it‑does viscosity controlling
An organic derivative of hectorite clay, Disteardimonium Hectorite is used as a viscosity controller - it thickens up formulations to make them less runny.It’s most popular use in cosmetics is in sunscreens, under the trademarked name Bentone 38 from Elementis. [more]
,
Beeswax
what‑it‑does emollient | emulsifying | viscosity controlling
The yellow solid stuff produced by honey bees to build their honeycomb. As for skincare, it's used as an emollient and thickening agent. [more]
,
Aluminum Hydroxide
what‑it‑does emollient | moisturizer/humectant | viscosity controlling
Officially, CosIng (the official EU ingredient database) lists Aluminum Hydroxide 's functions as opacifying (making the product white and non-transparent), as well as emollient and skin protectant.However, with a little bit of digging, it turns out Aluminum Hyroxide often moonlights as a protective coating for UV filter superstar Titanium Dioxide. [more]
,
Stearic Acid
what‑it‑does emulsifying | emollient | viscosity controlling
irritancy, com. 0 2
A common multi-tasker fatty acid that works as an emollient, emulsifier and thickener. [more]
,
Dimethicone/Vinyl Dimethicone Crosspolymer
what‑it‑does viscosity controlling
A white, elastomeric silicone powder that gives a nice silky and powdery feel to the products. [more]
,
Polyglyceryl-3 Polyricinoleate
what‑it‑does emulsifying | viscosity controlling
A plant based ingredient that helps water to mix with oil (aka W/O emulsifier).  It's especially good for soft to low-viscosity water-in-oil emulsions with non-greasy, pleasant skin feel like lip balms or thick body butters.
,
Disodium Edta
what‑it‑does chelating | viscosity controlling
Super common little helper ingredient that helps products to remain nice and stable for a longer time. It does so by neutralizing the metal ions in the formula (that usually get into there from water) that would otherwise cause some not so nice changes. [more]

Skim through

Ingredient name what-it-does irr., com. ID-Rating
Water solvent
Cyclopentasiloxane emollient, solvent
Dipropylene Glycol solvent, viscosity controlling
Zinc Oxide sunscreen goodie
Titanium Dioxide (Ci 77891) sunscreen goodie
Peg-10 Dimethicone emulsifying
Dicaprylyl Carbonate emollient
Styrene/Acrylates Copolymer
Dimethicone emollient 0, 1
Butylene Glycol moisturizer/​humectant, solvent 0, 1
Silica viscosity controlling, abrasive/​scrub
Sodium Chloride viscosity controlling
Acrylates/Dimethicone Copolymer
Vp/Hexadecene Copolymer viscosity controlling
Camellia Sinensis Leaf Water
Melaleuca Alternifolia (Tea Tree) Flower/Leaf/Stem Extract
Limonia Acidissima Extract
Rosa Davurica Bud Extract antioxidant
Cyclohexasiloxane emollient, solvent
Cetyl Peg/Ppg-10/1 Dimethicone emulsifying, surfactant/​cleansing
Disteardimonium Hectorite viscosity controlling
Sorbitan Olivate emulsifying
Sorbitan Sesquioleate emulsifying
Beeswax emollient, emulsifying, viscosity controlling
Aluminum Hydroxide emollient, moisturizer/​humectant, viscosity controlling
Stearic Acid emulsifying, emollient, viscosity controlling 0, 2
Peg-8 Laurate emulsifying, surfactant/​cleansing
Dimethicone/Vinyl Dimethicone Crosspolymer viscosity controlling
Hydrogen Dimethicone
Polyhydroxystearic Acid emulsifying
Triethoxycaprylylsilane
Tocopheryl Acetate antioxidant 0, 0
Sodium Benzoate preservative
Isopropyl Palmitate emollient 1, 4
Isostearic Acid surfactant/​cleansing, emulsifying
Lecithin emollient, emulsifying goodie
Ethylhexyl Palmitate emollient 0, 4
Potassium Sorbate preservative
Polyglyceryl-3 Polyricinoleate emulsifying, viscosity controlling
Disodium Edta chelating, viscosity controlling
Phenoxyethanol preservative
Fragrance perfuming icky

Ingredients explained

Also-called: Aqua | What-it-does: solvent

Good old water, aka H2O. The most common skincare ingredient of all. You can usually find it right in the very first spot of the ingredient list, meaning it’s the biggest thing out of all the stuff that makes up the product. 

It’s mainly a solvent for ingredients that do not like to dissolve in oils but rather in water. 

Expand to read more

Once inside the skin, it hydrates, but not from the outside - putting pure water on the skin (hello long baths!) is drying. 

One more thing: the water used in cosmetics is purified and deionized (it means that almost all of the mineral ions inside it is removed). Like this, the products can stay more stable over time. 

What-it-does: emollient, solvent

A super commonly used 5 unit long, cyclic structured silicone that is water-thin and does not stay on the skin but evaporates from it (called volatile silicone). Similar to other silicones, it gives skin and hair a silky, smooth feel

It's often combined with the non-volatile (aka stays on the skin) dimethicone as the two together form a water-resistant, breathable protective barrier on the skin without a negative tacky feel.

A clear, colorless liquid that works as a solvent and viscosity decreasing ingredient. 

Zinc Oxide - goodie
What-it-does: sunscreen

When it comes to sunscreen agents, Zinc Oxide is pretty much in a league of its own. It's a physical (or inorganic) sunscreen that has a lot in common with fellow inorganic sunscreen Titanium Dioxide (TiO2) but a couple of things make it superior even to TiO2.

If physical sunscreens don't tell you anything, go ahead and read about the basics here. Most of what we wrote about Titanium Dioxide is also true for Zinc Oxide so we will focus here on the differences. 

Expand to read more

The first main difference is that while TiO2 gives a nice broad spectrum protection, Zinc Oxide has an even nicer and even broader spectrum protection. It protects against UVB, UVA II, and UVA I almost uniformly, and is considered to be the broadest range sunscreen available today

It's also highly stable and non-irritating. So much so that Zinc Oxide also counts as a skin protectant and anti-irritant. It's also often used to treat skin irritations such as diaper rash.

As for the disadvantages, Zinc Oxide is also not cosmetically elegant. It leaves a disturbing whitish tint on the skin, although, according to a 2000 research paper by Dr. Pinnell, it's slightly less white than TiO2. Still, it's white and disturbing enough to use Zinc Oxide nanoparticles more and more often. 

We wrote more about nanoparticles and the concerns around them here, but the gist is that if nanoparticles were absorbed into the skin that would be a reason for legitimate health concerns. But luckily, so far research shows that sunscreen nanoparticles are not absorbed but remain on the surface of the skin or in the uppermost (dead) layer of the skin. This seems to be true even if the skin is damaged, for example, sunburnt. 

All in all, if you've found a Zinc Oxide sunscreen that you are happy to use every single day, that's fantastic and we suggest you stick with it. It's definitely one of the best, or probably even the best option out there for sun protection available worldwide. 

What-it-does: sunscreen

Titanium Dioxide is one of the two members of the elite sunscreen group called physical sunscreens (or inorganic sunscreens if you’re a science geek and want to be precise).

Traditionally, UV-filters are categorized as either chemical or physical. The big difference is supposed to be that chemical agents absorb UV-light while physical agents reflect it like a bunch of mini umbrellas on top of the skin. While this categorization is easy and logical it turns out it's not true. A recent, 2016 study shows that inorganic sunscreens work mostly by absorption, just like chemical filters, and only a little bit by reflection (they do reflect the light in the visible spectrum, but mostly absorb in the UV spectrum).

Expand to read more

Anyway, it doesn't matter if it reflects or absorbs, Titanium Dioxide is a pretty awesome sunscreen agent for two main reasons: it gives a nice broad spectrum coverage and it's highly stable. Its protection is very good between 290 - 350 nm (UVB and UVA II range), and less good at 350-400 nm (UVA I) range. Regular sized Titanium Dioxide also has a great safety profile, it's non-irritating and is pretty much free from any health concerns (like estrogenic effect worries with some chemical filters).

The disadvantage of Titanium Dioxide is that it's not cosmetically elegant, meaning it's a white, "unspreadable" mess. Sunscreens containing Titanium Dioxide are often hard to spread on the skin and they leave a disturbing whitish tint. The cosmetic industry is, of course, really trying to solve this problem and the best solution so far is using nanoparticles. The itsy-bitsy Nano-sized particles improve both spreadability and reduce the whitish tint a lot, but unfortunately, it also introduces new health concerns. 

The main concern with nanoparticles is that they are so tiny that they are absorbed into the skin more than we want them (ideally sunscreen should remain on the surface of the skin). Once absorbed they might form unwanted complexes with proteins and they might promote the formation of evil free radicals. But do not panic, these are concerns under investigation. A 2009 review article about the safety of nanoparticles summarizes this, "to date, in-vivo and in-vitro studies have not demonstrated percutaneous penetration of nanosized particles in titanium dioxide and zinc oxide sunscreens". The English translation is, so far it looks like sunscreens with nanoparticles do stay on the surface of the skin where they should be.  

All in all, Titanium Dioxide is a famous sunscreen agent and for good reason, it gives broad spectrum UV protection (best at UVB and UVA II), it's highly stable, and it has a good safety profile. It's definitely one of the best UV-filter agents we have today, especially in the US where new-generation Tinosorb filters are not (yet) approved. 

What-it-does: emulsifying

A silicone emulsifier that helps water and silicone oils to mix nicely together. It can also be used together with plant oil + silicone oil mixtures. 

What-it-does: emollient

A clear, colorless, almost odorless oil that spreads nicely and easily and gives a velvet dry skin feel. It is good friends with sunscreen agents and helps to solubilize them. Also, it makes sunscreens feel lighter and spread easier. 

A film-forming polymer (big molecule from repeated subunits) to create water-resistant sunscreen formulas. It also improves the SPF value of sunscreen formulas (approx. 11-18% boost in SPF per 1% Styrene/Acrylates Copolymer). 

What-it-does: emollient | Irritancy: 0 | Comedogenicity: 1

Probably the cheapest and most common silicone of all. It is a polymer (created from repeating subunits) molecule and has different molecular weight and thus different viscosity versions from water-light to thick liquid.

As for skincare, it makes the skin silky smooth, creates a subtle gloss and forms a protective barrier. Also, works well to fill in fine lines and wrinkles and give skin a plump look (of course that is only temporary, but still, it's nice). There are also scar treatment gels out there using dimethicone as their base ingredient. It helps to soften scars and increase their elasticity. 

Expand to read more

As for hair care, it is a non-volatile silicone meaning that it stays on the hair rather than evaporates from it and smoothes the hair like no other thing. Depending on your hair type, it can be a bit difficult to wash out and might cause some build-up (btw, this is not true to all silicones, only the non-volatile types). 

What-it-does: moisturizer/humectant, solvent | Irritancy: 0 | Comedogenicity: 1

Butylene glycol, or let’s just call it BG, is a multi-tasking colorless, syrupy liquid. It’s a great pick for creating a nice feeling product.  

BG’s main job is usually to be a solvent for the other ingredients. Other tasks include helping the product to absorb faster and deeper into the skin (penetration enhancer), making the product spread nicely over the skin (slip agent), and attracting water (humectant) into the skin.

Expand to read more

It’s an ingredient whose safety hasn’t been questioned so far by anyone (at least not that we know about). BG is approved by Ecocert and is also used enthusiastically in natural products. BTW, it’s also a food additive. 

A white powdery thing that's the major component of glass and sand. In cosmetics, it’s often in products that are supposed to keep your skin matte as it has great oil-absorbing abilities. Sometimes it’s also used as a helper ingredient to thicken up products

Also-called: Salt | What-it-does: viscosity controlling

Sodium chloride is the fancy name of salt. Normal, everyday table salt

It’s a common little helper ingredient in cosmetics that helps to increase the volume of a product (bulking), to disguise any unpleasant smell (masking) or to thicken up a formula (viscosity controlling). Sometimes it’s also used as a scrub.

A polymer molecule (big molecule from repeated subunits) whose main thing is being a film-former.

It is often dissolved in a volatile carrier fluid that evaporates from the skin leaving a nice, flexible film with great water, oil and abrasion resistance, oxygen permeability, and long-lasting cosmetic effect. These properties are especially useful for sun protection formulas and long-lasting foundations.  

What-it-does: viscosity controlling

We don't have description for this ingredient yet.

We don't have description for this ingredient yet.

We don't have description for this ingredient yet.

We don't have description for this ingredient yet.

What-it-does: antioxidant

We don't have description for this ingredient yet.

What-it-does: emollient, solvent

A light-feeling, volatile (meaning it does not absorb into the skin but evaporates from it) silicone that gives skin a unique, silky and non-greasy feel. It has excellent spreading properties and leaves no oily residue or build-up. 

Also-called: Cetyl Dimethicone Copolyol | What-it-does: emulsifying, surfactant/cleansing

A silicone emulsifier that helps water and silicone oils to mix nicely together. 

What-it-does: viscosity controlling

An organic derivative of hectorite clay, Disteardimonium Hectorite is used as a viscosity controller - it thickens up formulations to make them less runny.

It’s most popular use in cosmetics is in sunscreens, under the trademarked name Bentone 38 from Elementis. According to the manufacturer info, it is a real multi-tasker, including the ability to prevent pigments settling during storage, stabilizing a formula for longercreating a light and smooth skin feel and enhancing the water-resistance of sunscreen formulas
 

What-it-does: emulsifying

An ester coming from sorbitol and the fatty acids of olive oil. It often comes to the formula coupled with Cetearyl Olivate and the two together help water and oil to blend (emulsifier). It's a natural and Ecocert approved duo.

What-it-does: emulsifying

We don't have description for this ingredient yet.

Also-called: Beeswax | What-it-does: emollient, emulsifying, viscosity controlling

It's the yellow, solid stuff that you probably know from beeswax candles. It's a natural material produced by honey bees to build their honeycomb.

As for skincare, it's used as an emollient and thickening agent. It's super common in lip balms and lipsticks. 

Officially, CosIng (the official EU ingredient database) lists Aluminum Hydroxide 's functions as opacifying (making the product white and non-transparent), as well as emollient and skin protectant.

However, with a little bit of digging, it turns out Aluminum Hyroxide often moonlights as a protective coating for UV filter superstar Titanium Dioxide. Specifically, it protects our skin from the harmful effects of nasty Reactive Oxygen Species (free radicals derived from oxygen such as Superoxide and Hydrogen Peroxide) generated when Titanium Dioxide is exposed to UV light. Btw, chlorine in swimming pool water depletes this protective coating, so one more reason to reapply your sunscreen after a dip in the pool on holiday.

Expand to read more

Other than that, Aluminum Hydroxide also often shows up in composite pigment technologies where it is used the other way around (as the base material and not as the coating material) and helps to achieve higher color coverage with less pigment

What-it-does: emulsifying, emollient, viscosity controlling | Irritancy: 0 | Comedogenicity: 2

A common multi-tasker fatty acid. It helps water and oil to mix (emulsifier), it makes your skin feel smooth (emollient) and can help to thicken up products.

We don't have description for this ingredient yet.

What-it-does: viscosity controlling

A white, elastomeric silicone powder that gives a nice silky and powdery feel to the products. It also has some oil and sebum absorption capabilities. 

A silicone molecule that is half-way between Dimethicone and Methicone, meaning that some of the methyl (-CH3) groups are replaced with a hydrogen atom (in Methicone half of the CH3 groups are replaced). This makes Hydrogen Dimethicone a handy pigment bonding agent used for the hydrophobization treatment of powders as the H atoms can absorb traces of water from the surface of pigments.

It almost always comes stuck together with either Titanium Dioxide, Zinc Oxide or Mica. In suncare products, it binds to physical UV filters to maximize their protection while minimizing any white casts. It also has good chemical stability with no irritation. In makeup, it is often paired with Mica where it offers nice hydrophobic properties and improves skin adhesion - meaning it will make it easier for products to stay where they should be.

What-it-does: emulsifying

A so-called dispersant or dispersing agent that's used in inorganic (titanium dioxide/zinc oxide based) sunscreens or in make-up products to help to distribute the pigments nicely and evenly on the skin. It's also claimed to increase the UV absorption of the sunscreen formula as well as to reduce the annoying white cast left behind by inorganic sunscreens.

A clear, light yellow liquid that is used to coat pigments (such as inorganic sunscreen agents or colorants) in cosmetic products.  The coating helps to stabilize pigments in the formulas and also helps them to spread easily and evenly on the skin. 

Also-called: Vitamin E Acetate | What-it-does: antioxidant | Irritancy: 0 | Comedogenicity: 0

It’s the most commonly used version of pure vitamin E in cosmetics. You can read all about the pure form here. This one is the so-called esterified version. 

According to famous dermatologist, Leslie Baumann while tocopheryl acetate is more stable and has a longer shelf life, it’s also more poorly absorbed by the skin and may not have the same awesome photoprotective effects as pure Vit E. 

What-it-does: preservative

A helper ingredient that helps to make the products stay nice longer, aka preservative. It works mainly against fungi. 

It’s pH dependent and works best at acidic pH levels (3-5). It’s not strong enough to be used in itself so it’s always combined with something else, often with potassium sorbate.

What-it-does: emollient | Irritancy: 1 | Comedogenicity: 4

A clear, colorless emollient ester (oily liquid from isopropyl alcohol + palmitic acid) that makes the skin nice and smooth. It has very good spreading properties and gives a silky touch to the products.

A liquid fatty acid created from oleic acid. It's claimed to have great odour, thermal and oxidation stability and is great for  the stabilization of pigments and mineral particles in oils and solvents. It's quite popular in foundations.

Lecithin - goodie
What-it-does: emollient, emulsifying

A very common ingredient that can be found in all cell membranes. In cosmetics it's quite the multi-tasker: it's an emollient and water-binding ingredient but it's also an emulsifier and can be used for stabilization purposes. It's also often used to create liposomes

What-it-does: emollient | Irritancy: 0 | Comedogenicity: 4

A super common, medium-spreading emollient ester that gives richness to the formula and a mild feel during rubout. It can be a replacement for mineral oil and is often combined with other emollients to achieve different sensorial properties.

What-it-does: preservative

It's one of those things that help your cosmetics not to go wrong too soon, aka a preservative. It’s not a strong one and doesn’t really work against bacteria, but more against mold and yeast. To do that it has to break down to its active form, sorbic acid. For that to happen, there has to be water in the product and the right pH value (pH 3-4). 

But even if everything is right, it’s not enough on its own. If you see potassium sorbate you should see some other preservative next to it too.

Expand to read more

BTW, it’s also a food preservative and even has an E number, E202.

A plant based ingredient that helps water to mix with oil (aka W/O emulsifier).  It's especially good for soft to low-viscosity water-in-oil emulsions with non-greasy, pleasant skin feel like lip balms or thick body butters.

Super common little helper ingredient that helps products to remain nice and stable for a longer time. It does so by neutralizing the metal ions in the formula (that usually get into there from water) that would otherwise cause some not so nice changes.

What-it-does: preservative

It’s pretty much the current IT-preservative. It’s safe and gentle, but even more importantly, it’s not a feared-by-everyone-mostly-without-scientific-reason paraben.

It’s not something new: it was introduced around 1950 and today it can be used up to 1% worldwide. It can be found in nature - in green tea - but the version used in cosmetics is synthetic. 

Expand to read more

Other than having a good safety profile and being quite gentle to the skin it has some other advantages too. It can be used in many types of formulations as it has great thermal stability (can be heated up to 85°C) and works on a wide range of pH levels (ph 3-10). 

It’s often used together with ethylhexylglycerin as it nicely improves the preservative activity of phenoxyethanol.

Fragrance - icky
Also-called: Fragrance, Parfum | What-it-does: perfuming

Exactly what it sounds: nice smelling stuff put into cosmetic products so that the end product also smells nice. Fragrance in the US and parfum in the EU is a generic term on the ingredient list that is made up of 30 to 50 chemicals on average (but it can have as much as 200 components!). 

If you are someone who likes to know what you put on your face than fragrance is not your best friend - no way to know what’s really in it.  

Expand to read more

Also, if your skin is sensitive, fragrance is again not your best friend. It’s the number one cause of contact allergy to cosmetics. It’s definitely a smart thing to avoid with sensitive skin (and fragrance of any type - natural is just as allergic as synthetic, if not worse!). 

You may also want to take a look at...