Follow us on our new Insta page »
Clicks SUNprotect Spf30 Water Resistant Lotion

Spf30 Water Resistant Lotion

Body sunscreen.
Uploaded by: farourou on

Clicks SUNprotect Spf30 Water Resistant Lotion
Ingredients explained

Also-called: Aqua | What-it-does: solvent

Good old water, aka H2O. The most common skincare ingredient of all. You can usually find it right in the very first spot of the ingredient list, meaning it’s the biggest thing out of all the stuff that makes up the product. 

It’s mainly a solvent for ingredients that do not like to dissolve in oils but rather in water. 

Also-called: Octinoxate, Octyl Methoxycinnamate | What-it-does: sunscreen | Irritancy: 0 | Comedogenicity: 0

A clear, oil-soluble, "cosmetically-elegant" liquid that is the most commonly used chemical sunscreen. It absorbs UVB radiation (at wavelengths: 280-320 nm) with a peak protection at 310nm. 

It only protects against UVB and not UVA rays (the 320-400 nm range) – so always choose products that contain other sunscreens too. It is not very stable either, when exposed to sunlight, it kind of breaks down and loses its effectiveness (not instantly, but over time - it loses 10% of its SPF protection ability within 35 mins). To make it more stable it can be - and should be - combined with other sunscreen agents to give stable and broad-spectrum protection (the new generation sunscreen agent, Tinosorb S is a particularly good one for that).

What-it-does: sunscreen

An oil-soluble chemical sunscreen agent that protects skin in the UVB and somewhat in the UVA II range with a peak absorption of 304 nm. Its protection is not strong enough on its own but it is quite photostable (loses 10% of SPF protection in 95 mins) and is often used to stabilize other photo-unstable UV-filters, for example, Avobenzone. It is also often used to improve the water resistance of the products. 

Octocrylene's safety profile is generally quite good, though a review study in Contact Dermatitis reports an "increasing number of patients with photo contact allergy to octocrylene." Mainly adults with ketoprofen-sensitivity and children with sensitive skin are affected, so if you have a small kid, it is probably better to use octocrylene-free sunscreens.

What-it-does: moisturizer/humectant, solvent | Irritancy: 0 | Comedogenicity: 0
  • It's a helper ingredient that improves the freeze-thaw stability of products
  • It's also a solvent, humectant and to some extent a penetration enhancer
  • It has a bad reputation among natural cosmetics advocates but cosmetic scientists and toxicology experts do not agree (read more in the geeky details section)
Read all the geeky details about Propylene Glycol here >>

An often used emollient with a light and silky feel. It's very mild to both skin and eyes and spreads nicely and easily. It's often used in sunscreens as it's also an excellent solvent for sunscreen agents. 

Also-called: Avobenzone | What-it-does: sunscreen

The famous Avobenzone. It is a special snowflake as it is the only globally available chemical sunscreen agent that provides proper UVA protection (in the US, new generation sunscreen agents are not approved because of impossible FDA regulations). It is the global gold standard of UVA protection and is the most used UVA sunscreen in the world. 

It gives very good protection across the whole UVA range (310-400 nm that is both UVA1 and UVA2) with a peak protection at 360 nm. The problem with it, though, is that it is not photostable and degrades in the sunlight. Wikipedia says that avobenzone loses 36% of its UV-absorption capacity after just one hour of sunlight (yep, this is one of the reasons why sunscreens have to be reapplied after a few hours).

What-it-does: emollient, viscosity controlling, emulsion stabilising | Irritancy: 2 | Comedogenicity: 2

A so-called fatty (the good, non-drying kind of) alcohol that does all kinds of things in a skincare product: it makes your skin feel smooth and nice (emollient), helps to thicken up products and also helps water and oil to blend (emulsifier). Can be derived from coconut or palm kernel oil.

Also-called: Mineral Oil | What-it-does: emollient, solvent | Irritancy: 0 | Comedogenicity: 0-2

The famous or maybe rather infamous mineral oil. The clear oily liquid that is the "cheap by-product" of refining crude oil and the one that gets a lot of heat for its poor provenance. It is a very controversial ingredient with pros and cons and plenty of myths around it. So let us see them:  

The pros of mineral oil
Trust us, if something is used for more than 100 years in cosmetic products, it has advantages. Chemically speaking, cosmetic grade mineral oil is a complex mixture of highly refined saturated hydrocarbons with C15-50 chain length. It is not merely a "by-product" but rather a specifically isolated part of petroleum that is very pure and inert.

It is a great emollient and moisturizer working mainly by occlusivity. Occlusivity is one of the basic mechanisms of how moisturizers work and it means that mineral oil sits on top of the skin and hinders so-called trans-epidermal water loss, i.e water evaporating out of your skin. When compared to heavy-duty plant oil, extra virgin coconut oil, the two of them were equally efficient and safe as moisturizers in treating xerosis, a skin condition connected to very dry skin.

What-it-does: sunscreen

An oil-soluble chemical sunscreen agent that protects the skin from UVB (295-315 nm) with a peak protection at 306 nm. Homosalate is not a strong UV filter in and of itself (gives only SPF 4.3 protection at max. allowed 10% concentration) and it is not photostable (looses 10% of its SPF protection in 45 mins) so it always has to be combined with other sunscreens for proper protection. Its big advantage, though, is that it is a liquid and is excellent for dissolving other hard to solubilize powder sunscreen agents, like the famous Avobenzone.

Regarding Homosalate's safety profile, we do not have the best news. In-vitro (made in the labs) studies have shown that it might have some estrogenic activity. Do not panic, these studies were not conducted on real humans under real world conditions. Still, if you are a 'better safe than sorry' type, be careful when using Homosalate containing sunscreens long-term and full-body.

Also-called: Tinosorb M, Bisoctrizole | What-it-does: sunscreen

The long name covers a nice sunscreen agent and quite a special one at that: It's a "hybrid" sunscreen meaning it's half-way between physical (the ones that, at least partly, reflect the sun) and chemical agents (that absorb the rays, which most sunscreens do).  It is a new generation UV filter and, just like its sister, Trinosorb S, it is not available in the US. 

It gives nice broad-spectrum coverage (280-400 nm, meaning UVB as well as UVA protecion) with peak protection at 305 nm and 360 nm and it is highly photostable. It can also help to stabilize other less stable sunscreens, like Octinoxate and is generally happy to work together with other UV-filters.

This ingredient name is not according to the INCI-standard. :( What, why?!

What-it-does: moisturizer/humectant, solvent | Irritancy: 0 | Comedogenicity: 0
  • It's a helper ingredient that improves the freeze-thaw stability of products
  • It's also a solvent, humectant and to some extent a penetration enhancer
  • It has a bad reputation among natural cosmetics advocates but cosmetic scientists and toxicology experts do not agree (read more in the geeky details section)
Read all the geeky details about Propylene Glycol here >>

It's one of the most commonly used thickeners and emulsion stabilizers. If the product is too runny, a little xanthan gum will make it more gel-like. Used alone, it can make the formula sticky and it is a good team player so it is usually combined with other thickeners and so-called rheology modifiers (helper ingredients that adjust the flow and thus the feel of the formula). The typical use level of Xantha Gum is below 1%, it is usually in the 0.1-0.5% range. 

Btw, Xanthan gum is all natural, a chain of sugar molecules (polysaccharide) produced from individual sugar molecules (glucose and sucrose) via fermentation. It’s approved by Ecocert and also used in the food industry (E415). 

A white to beige powder that is described as the golden standard emulsifier for emulsions (oil+water mixtures) that are difficult to stabilize. It is especially popular in sunscreens as it can boost SPF protection and increase the water-resistance of the formula. 

What-it-does: emollient, perfuming | Irritancy: 3 | Comedogenicity: 3-5

A  clear, colorless oil-like liquid that makes the skin feel smooth and nice (aka emollient) and it does so without it being greasy.

What's more, it can even reduce the heavy, greasy feel in products with high oil content. It's also fast-spreading meaning that it gives the formula a good, nice slip. It absorbs quickly into the skin and helps other ingredients to penetrate quicker and deeper. 

What-it-does: emollient | Irritancy: 0 | Comedogenicity: 1

Probably the most common silicone of all. It is a polymer (created from repeating subunits) molecule and has different molecular weight and thus different viscosity versions from water-light to thick liquid.

As for skincare, it makes the skin silky smooth, creates a subtle gloss and forms a protective barrier (aka occlusive). Also, works well to fill in fine lines and wrinkles and give skin a plump look (of course that is only temporary, but still, it's nice). There are also scar treatment gels out there using dimethicone as their base ingredient. It helps to soften scars and increase their elasticity. 

What-it-does: viscosity controlling, emulsion stabilising | Irritancy: 0 | Comedogenicity: 1

A big molecule created from repeated subunits (a polymer of acrylic acid) that magically converts a liquid into a nice gel formula.  It usually has to be neutralized with a base (such as sodium hydroxide) for the thickening to occur and it creates viscous, clear gels that also feel nice and non-tacky on the skin. No wonder, it is a very popular and common ingredient. Typically used at 1% or less in most formulations.

What-it-does: preservative

It’s pretty much the current IT-preservative. It’s safe and gentle, but even more importantly, it’s not a feared-by-everyone-mostly-without-scientific-reason paraben.

It’s not something new: it was introduced around 1950 and today it can be used up to 1% worldwide. It can be found in nature - in green tea - but the version used in cosmetics is synthetic. 

What-it-does: preservative, deodorant

If you have spotted ethylhexylglycerin on the ingredient list, most probably you will see there also the current IT-preservative, phenoxyethanol. They are good friends because ethylhexylglycerin can boost the effectiveness of phenoxyethanol (and other preservatives) and as an added bonus it feels nice on the skin too.

Also, it's an effective deodorant and a medium spreading emollient

You may also want to take a look at...

what‑it‑does solvent
Normal (well kind of - it's purified and deionized) water. Usually the main solvent in cosmetic products. [more]
what‑it‑does sunscreen
irritancy, com. 0, 0
Octinoxate - an old-school chemical sunscreen that absorbs UVB radiation (wavelengths: 280-320 nm). Not photostable and does not protect against UVA. [more]
what‑it‑does sunscreen
An oil-soluble chemical sunscreen agent that protects skin in the UVB and somewhat in the UVA II range with a peak absorption of 304 nm. [more]
what‑it‑does moisturizer/humectant | solvent
irritancy, com. 0, 0
A common glycol that improves the freeze-thaw stability of products. It's also a solvent, humectant and to some extent a penetration enhancer. [more]
what‑it‑does emollient | antimicrobial/antibacterial
An often used emollient with a light and silky feel. It's very mild to both skin and eyes and spreads nicely and easily. It's often used in sunscreens as it's also an excellent solvent for sunscreen agents. 
what‑it‑does sunscreen
Avobenzone - the only globally available chemical sunscreen that gives proper UVA protection. It is not photostable so has to be combined with ingredients that help to stabilize it. [more]
what‑it‑does emollient | viscosity controlling
irritancy, com. 2, 2
A fatty (the good, non-drying kind of) alcohol that makes your skin feel smooth and nice (emollient), helps to thicken up products and also helps water and oil to blend (emulsifier).
what‑it‑does emollient | solvent
irritancy, com. 0, 0-2
A clear, oily liquid that comes from refining crude oil. Even though it is a highly controversial ingredient, the scientific consensus is that it is a safe, non-irritating and effective emollient and moisturizer working mainly by occlusivity. [more]
what‑it‑does sunscreen
An oil-soluble chemical sunscreen agent that protects the skin from UVB (295-315 nm) with a peak protection at 306 nm. Homosalate is not a strong UV filter in and of itself (gives only SPF 4.3 protection at max. [more]
what‑it‑does sunscreen
Tinosorb M - a new generation, "hybrid" (between physical and chemical agents) sunscreen that gives broad-spectrum coverage and is highly photostable. [more]
what‑it‑does moisturizer/humectant | solvent
irritancy, com. 0, 0
A common glycol that improves the freeze-thaw stability of products. It's also a solvent, humectant and to some extent a penetration enhancer. [more]
what‑it‑does viscosity controlling
A super commonly used thickener and emulsion stabilizer. [more]
what‑it‑does emulsifying | surfactant/cleansing
A white to beige powder that is the golden standard emulsifier for emulsions (oil+water mixtures) that are difficult to stabilize. [more]
what‑it‑does emollient | perfuming
irritancy, com. 3, 3-5
A clear, colorless oil-like liquid that's used as a fast-spreading, non-greasy emollient. [more]
what‑it‑does emollient
irritancy, com. 0, 1
A very common silicone that gives both skin and hair a silky smooth feel. It also forms a protective barrier on the skin and fills in fine lines. Also used for scar treatment. [more]
what‑it‑does viscosity controlling
irritancy, com. 0, 1
A handy white powder that magically converts a liquid into a nice gel formula. [more]
what‑it‑does preservative
Pretty much the current IT-preservative. It’s safe and gentle, and can be used up to 1% worldwide. [more]
what‑it‑does preservative
It can boost the effectiveness of phenoxyethanol (and other preservatives) and as an added bonus it feels nice on the skin too. [more]