Follow us on our new Insta page »
Tołpa Dermo Face Physio Żel Do Mycia Twarzy I Oczu

Żel Do Mycia Twarzy I Oczu

Face and eye cleansing gel for very sensitive and allergic skin. Good for normal and combination skin.
Uploaded by: agzukowska on

Tołpa Dermo Face Physio Żel Do Mycia Twarzy I Oczu
Ingredients explained

Also-called: Water | What-it-does: solvent

Good old water, aka H2O. The most common skincare ingredient of all. You can usually find it right in the very first spot of the ingredient list, meaning it’s the biggest thing out of all the stuff that makes up the product. 

It’s mainly a solvent for ingredients that do not like to dissolve in oils but rather in water. 

Once inside the skin, it hydrates, but not from the outside - putting pure water on the skin (hello long baths!) is drying. 

One more thing: the water used in cosmetics is purified and deionized (it means that almost all of the mineral ions inside it is removed). Like this, the products can stay more stable over time. 

Glycerin - superstar
Also-called: Glycerol | What-it-does: skin-identical ingredient, moisturizer/humectant | Irritancy: 0 | Comedogenicity: 0
  • A natural moisturizer that’s also in our skin
  • A super common, safe, effective and cheap molecule used for more than 50 years
  • Not only a simple moisturizer but knows much more: keeps the skin lipids between our skin cells in a healthy (liquid crystal) state, protects against irritation, helps to restore barrier
  • Effective from as low as 3% with even more benefits at higher concentrations up to 20-40% (around 10% is a good usability-effectiveness sweet spot)
  • High-glycerin moisturizers are awesome for treating severely dry skin
Read all the geeky details about Glycerin here >>

What-it-does: emulsifying, surfactant/cleansing | Irritancy: 0 | Comedogenicity: 0

It's a common little helper ingredient that helps water and oil to mix together. Also, it can help to increase the solubility of some other ingredients in the formula. 

What-it-does: moisturizer/humectant, solvent, viscosity controlling | Irritancy: 0 | Comedogenicity: 0
  • It's a helper ingredient that improves the freeze-thaw stability of products
  • It's also a solvent, humectant and to some extent a penetration enhancer
  • It has a bad reputation among natural cosmetics advocates but cosmetic scientists and toxicology experts do not agree (read more in the geeky details section)
Read all the geeky details about Propylene Glycol here >>

Though its long name does not reveal it, this polymer molecule (big molecule from repeated subunits or monomers) is a relative to the super common, water-loving thickener, Carbomer. Both of them are big molecules that contain acrylic acid units, but Acrylates/C10-30 Alkyl Acrylate Crosspolymer also contains some other monomers that are hydrophobic, i.e. water-hating. 

This means that our molecule is part water- and part oil-loving, so it not only works as a thickener but also as an emulsion stabilizer. It is very common in gel-type formulas that also contain an oil-phase as well as in cleansers as it also works with most cleansing agents (unlike a lot of other thickeners). 

We don't have description for this ingredient yet.

What-it-does: moisturizer/humectant

A derivative of Urea, that works as a strong moisturizer and humectant meaning that it helps the skin to cling onto water and thus to make it hydrated and elastic.

According to manufacturer's data,  Hydroxyethyl Urea has a similar moisturizing ability to glycerin (measured at 5%), but it feels nicer on the skin as it is non-sticky and non-tacky and gives a lubricous and moist feeling to the skin.

What-it-does: skin-identical ingredient, moisturizer/humectant | Irritancy: 0 | Comedogenicity: 0

It’s the - sodium form - cousin of the famous NMFhyaluronic acid (HA). If HA does not tell you anything we have a super detailed, geeky explanation about it here.  The TL; DR version of HA is that it's a huge polymer (big molecule from repeated subunits) found in the skin that acts as a sponge helping the skin to hold onto water, being plump and elastic. HA is famous for its crazy water holding capacity as it can bind up to 1000 times its own weight in water.

As far as skincare goes, sodium hyaluronate and hyaluronic acid are pretty much the same and the two names are used interchangeably. As cosmetic chemist kindofstephen writes on reddit  "sodium hyaluronate disassociates into hyaluronic acid molecule and a sodium atom in solution". 

In spite of this, if you search for "hyaluronic acid vs sodium hyaluronate" you will find on multiple places that sodium hyaluronate is smaller and can penetrate the skin better. Chemically, this is definitely not true, as the two forms are almost the same, both are polymers and the subunits can be repeated in both forms as much as you like. (We also checked Prospector for sodium hyaluronate versions actually used in cosmetic products and found that the most common molecular weight was 1.5-1.8 million Da that absolutely counts as high molecular weight).

What seems to be a true difference, though, is that the salt form is more stable, easier to formulate and cheaper so it pops up more often on the ingredient lists. 

If you wanna become a real HA-and-the-skin expert you can read way more about the topic at hyaluronic acid (including penetration-questions, differences between high and low molecular weight versions and a bunch of references to scientific literature).

What-it-does: surfactant/cleansing

A soft, mild cleansing agent with amphoteric structure meaning that its head contains both a positively and a negatively charged part (surfactants are most commonly anionic meaning their head has a negative charge).  It also has great foaming abilities and is recommended for baby products and other non-irritating cleansers.

Also-called: lye | What-it-does: buffering

The unfancy name for it is lye. It’s a solid white stuff that’s very alkaline and used in small amounts to adjust the pH of the product and make it just right. 

For example, in case of AHA or BHA exfoliants, the right pH is super-duper important, and pH adjusters like sodium hydroxide are needed.  

BTW, lye is not something new. It was already used by ancient Egyptians to help oil and fat magically turn into something else. Can you guess what? Yes, it’s soap. It still often shows up in the ingredient list of soaps and other cleansers.

Sodium hydroxide in itself is a potent skin irritant, but once it's reacted (as it is usually in skin care products, like exfoliants) it is totally harmless.

Super common little helper ingredient that helps products to remain nice and stable for a longer time. It does so by neutralizing the metal ions in the formula (that usually get into there from water) that would otherwise cause some not so nice changes.

It is typically used in tiny amounts, around 0.1% or less.

Parfum - icky
Also-called: Fragrance, Parfum;Parfum/Fragrance | What-it-does: perfuming

Exactly what it sounds: nice smelling stuff put into cosmetic products so that the end product also smells nice. Fragrance in the US and parfum in the EU is a generic term on the ingredient list that is made up of 30 to 50 chemicals on average (but it can have as much as 200 components!). 

If you are someone who likes to know what you put on your face then fragrance is not your best friend - there's no way to know what’s really in it.  

Also, if your skin is sensitive, fragrance is again not your best friend. It’s the number one cause of contact allergy to cosmetics. It’s definitely a smart thing to avoid with sensitive skin (and fragrance of any type - natural is just as allergic as synthetic, if not worse!). 

What-it-does: solvent

It's a type of glycol that - according to the manufacturer - is an extremely good replacement for other glycols like propylene or butylene glycol. Its main job is to be a solvent, but it has also very good antimicrobial properties and acts as a true preservative booster. Also helps with skin hydration without stickiness or tacky feel.

What-it-does: preservative, deodorant

If you have spotted ethylhexylglycerin on the ingredient list, most probably you will see there also the current IT-preservative, phenoxyethanol. They are good friends because ethylhexylglycerin can boost the effectiveness of phenoxyethanol (and other preservatives) and as an added bonus it feels nice on the skin too.

Also, it's an effective deodorant and a medium spreading emollient

What-it-does: preservative

It’s pretty much the current IT-preservative. It’s safe and gentle, but even more importantly, it’s not a feared-by-everyone-mostly-without-scientific-reason paraben.

It’s not something new: it was introduced around 1950 and today it can be used up to 1% worldwide. It can be found in nature - in green tea - but the version used in cosmetics is synthetic. 

Other than having a good safety profile and being quite gentle to the skin it has some other advantages too. It can be used in many types of formulations as it has great thermal stability (can be heated up to 85°C) and works on a wide range of pH levels (ph 3-10). 

It’s often used together with ethylhexylglycerin as it nicely improves the preservative activity of phenoxyethanol.

It’s a handy multi-tasking ingredient that gives the skin a nice, soft feel. At the same time, it also boosts the effectiveness of other preservatives, such as the nowadays super commonly used phenoxyethanol

The blend of these two (caprylyl glycol + phenoxyethanol) is called Optiphen, which not only helps to keep your cosmetics free from nasty things for a long time but also gives a good feel to the finished product. It's a popular duo.

What-it-does: preservative

An Ecocert-approved, natural preservative that counts as gentle and non-irritating to the skin. Usually, it comes to the formula as part of a preservative blend as it's not enough on its own.

You may also want to take a look at...

what‑it‑does solvent
Normal (well kind of - it's purified and deionized) water. Usually the main solvent in cosmetic products. [more]
what‑it‑does skin-identical ingredient | moisturizer/humectant
irritancy, com. 0, 0
A real oldie but a goodie. Great natural moisturizer and skin-identical ingredient that plays an important role in skin hydration and general skin health. [more]
what‑it‑does emulsifying | surfactant/cleansing
irritancy, com. 0, 0
It's a common little helper ingredient that helps water and oil to mix together. Also, it can help to increase the solubility of some other ingredients in the formula. 
what‑it‑does moisturizer/humectant | solvent | viscosity controlling
irritancy, com. 0, 0
A common glycol that improves the freeze-thaw stability of products. It's also a solvent, humectant and to some extent a penetration enhancer. [more]
what‑it‑does viscosity controlling
A common helper ingredient that stabilizes emulsions and helps to thicken up products. [more]
what‑it‑does moisturizer/humectant
A derivative of Urea, that works as a strong moisturizer and humectant meaning that it helps the skin to cling onto water and thus to make it hydrated and elastic. According to manufacturer's data,  Hydroxyethyl Urea has a similar moisturizing ability to glycerin (measured at 5%), but it feels nicer on the skin as it is non-sticky and non-tacky and gives a lubri [more]
what‑it‑does skin-identical ingredient | moisturizer/humectant
irritancy, com. 0, 0
It's the salt form of famous humectant and natural moisturizing factor, hyaluronic acid. It can bind huge amounts of water and it's pretty much the current IT-moisturizer. [more]
what‑it‑does surfactant/cleansing
A soft, mild cleansing agent with amphoteric structure (its head contains both a positively and a negatively charged part). [more]
what‑it‑does buffering
Lye - A solid white stuff that’s very alkaline and used in small amount to adjust the pH of the product.  [more]
what‑it‑does chelating | viscosity controlling
Super common little helper ingredient that helps products to remain nice and stable for a longer time. It does so by neutralizing the metal ions in the formula (that usually get into there from water) that would otherwise cause some not so nice changes. [more]
what‑it‑does perfuming
The generic term for nice smelling stuff put into cosmetic products so that the end product also smells nice. It is made up of 30 to 50 chemicals on average. [more]
what‑it‑does solvent
A type of glycol. Its main job is to be a solvent, but it has also very good antimicrobial properties and acts as a true preservative booster. [more]
what‑it‑does preservative
It can boost the effectiveness of phenoxyethanol (and other preservatives) and as an added bonus it feels nice on the skin too. [more]
what‑it‑does preservative
Pretty much the current IT-preservative. It’s safe and gentle, and can be used up to 1% worldwide. [more]
what‑it‑does moisturizer/humectant | emollient
A handy multi-tasking ingredient that gives the skin a nice, soft feel and also boosts the effectiveness of other preservatives. [more]
what‑it‑does preservative
An Ecocert-approved, natural preservative that counts as gentle and non-irritating to the skin. Usually, it comes to the formula as part of a preservative blend as it's not enough on its own.