Follow us on our new Insta page »
Smooth É Physical White Babyface UV Expert Sunscreen

Physical White Babyface UV Expert Sunscreen

Smooth e physical white babyface uv expert sunscreen (white) 100% non chemical sunscreen spf50+ : uvb protection pa+++ : uva protection 8 hours protection water-resistant vitamin e and natural extract plus
Uploaded by: monypech on

Smooth É Physical White Babyface UV Expert Sunscreen
Ingredients explained

Also-called: Aqua;Water | What-it-does: solvent

Good old water, aka H2O. The most common skincare ingredient of all. You can usually find it right in the very first spot of the ingredient list, meaning it’s the biggest thing out of all the stuff that makes up the product. 

It’s mainly a solvent for ingredients that do not like to dissolve in oils but rather in water. 

Once inside the skin, it hydrates, but not from the outside - putting pure water on the skin (hello long baths!) is drying. 

One more thing: the water used in cosmetics is purified and deionized (it means that almost all of the mineral ions inside it is removed). Like this, the products can stay more stable over time. 

What-it-does: emollient, solvent

A super commonly used 5 unit long, cyclic structured silicone that is water-thin and does not stay on the skin but evaporates from it (called volatile silicone). Similar to other silicones, it gives skin and hair a silky, smooth feel

It's often combined with the non-volatile (i.e. stays on the skin) dimethicone as the two together form a water-resistant, breathable protective barrier on the skin without a negative tacky feel.

An often used emollient with a light and silky feel. It's very mild to both skin and eyes and spreads nicely and easily. It's often used in sunscreens as it's also an excellent solvent for sunscreen agents. 

Zinc Oxide - goodie
What-it-does: sunscreen | Irritancy: 0 | Comedogenicity: 1

When it comes to sunscreen agents, Zinc Oxide is pretty much in a league of its own. It's a physical (or inorganic) sunscreen that has a lot in common with fellow inorganic sunscreen Titanium Dioxide (TiO2) but a couple of things make it superior even to TiO2.

If physical sunscreens don't tell you anything, go ahead and read about the basics here. Most of what we wrote about Titanium Dioxide is also true for Zinc Oxide so we will focus here on the differences. 

The first main difference is that while TiO2 gives a nice broad spectrum protection, Zinc Oxide has an even nicer and even broader spectrum protection. It protects against UVB, UVA II, and UVA I almost uniformly, and is considered to be the broadest range sunscreen available today

It's also highly stable and non-irritating. So much so that Zinc Oxide also counts as a skin protectant and anti-irritant. It's also often used to treat skin irritations such as diaper rash.

As for the disadvantages, Zinc Oxide is also not cosmetically elegant. It leaves a disturbing whitish tint on the skin, although, according to a 2000 research paper by Dr. Pinnell, it's slightly less white than TiO2. Still, it's white and disturbing enough to use Zinc Oxide nanoparticles more and more often. 

We wrote more about nanoparticles and the concerns around them here, but the gist is that if nanoparticles were absorbed into the skin that would be a reason for legitimate health concerns. But luckily, so far research shows that sunscreen nanoparticles are not absorbed but remain on the surface of the skin or in the uppermost (dead) layer of the skin. This seems to be true even if the skin is damaged, for example, sunburnt. 

All in all, if you've found a Zinc Oxide sunscreen that you are happy to use every single day, that's fantastic and we suggest you stick with it. It's definitely one of the best, or probably even the best option out there for sun protection available worldwide. 

What-it-does: sunscreen, colorant

Titanium Dioxide is one of the two members of the elite sunscreen group called physical sunscreens (or inorganic sunscreens if you’re a science geek and want to be precise).

Traditionally, UV-filters are categorized as either chemical or physical. The big difference is supposed to be that chemical agents absorb UV-light while physical agents reflect it like a bunch of mini umbrellas on top of the skin. While this categorization is easy and logical it turns out it's not true. A recent, 2016 study shows that inorganic sunscreens work mostly by absorption, just like chemical filters, and only a little bit by reflection (they do reflect the light in the visible spectrum, but mostly absorb in the UV spectrum).

Anyway, it doesn't matter if it reflects or absorbs, Titanium Dioxide is a pretty awesome sunscreen agent for two main reasons: it gives a nice broad spectrum coverage and it's highly stable. Its protection is very good between 290 - 350 nm (UVB and UVA II range), and less good at 350-400 nm (UVA I) range. Regular sized Titanium Dioxide also has a great safety profile, it's non-irritating and is pretty much free from any health concerns (like estrogenic effect worries with some chemical filters).

The disadvantage of Titanium Dioxide is that it's not cosmetically elegant, meaning it's a white, "unspreadable" mess. Sunscreens containing Titanium Dioxide are often hard to spread on the skin and they leave a disturbing whitish tint. The cosmetic industry is, of course, really trying to solve this problem and the best solution so far is using nanoparticles. The itsy-bitsy Nano-sized particles improve both spreadability and reduce the whitish tint a lot, but unfortunately, it also introduces new health concerns. 

The main concern with nanoparticles is that they are so tiny that they are absorbed into the skin more than we want them (ideally sunscreen should remain on the surface of the skin). Once absorbed they might form unwanted complexes with proteins and they might promote the formation of evil free radicals. But do not panic, these are concerns under investigation. A 2009 review article about the safety of nanoparticles summarizes this, "to date, in-vivo and in-vitro studies have not demonstrated percutaneous penetration of nanosized particles in titanium dioxide and zinc oxide sunscreens". The English translation is, so far it looks like sunscreens with nanoparticles do stay on the surface of the skin where they should be.  

All in all, Titanium Dioxide is a famous sunscreen agent and for good reason, it gives broad spectrum UV protection (best at UVB and UVA II), it's highly stable, and it has a good safety profile. It's definitely one of the best UV-filter agents we have today, especially in the US where new-generation Tinosorb filters are not (yet) approved. 

We don't have description for this ingredient yet.

What-it-does: emulsifying

We don't have description for this ingredient yet.

What-it-does: emollient, viscosity controlling | Irritancy: 0 | Comedogenicity: 2-3

A common multi-tasker fatty acid. It makes your skin feel nice and smooth (emollient), gives body to cream type products and helps to stabilize water and oil mixes (aka emulsions).

Officially, CosIng (the official EU ingredient database) lists Aluminum Hydroxide 's functions as opacifying (making the product white and non-transparent), as well as emollient and skin protectant.

However, with a little bit of digging, it turns out Aluminum Hyroxide often moonlights as a protective coating for UV filter superstar Titanium Dioxide. Specifically, it protects our skin from the harmful effects of nasty Reactive Oxygen Species (free radicals derived from oxygen such as Superoxide and Hydrogen Peroxide) generated when Titanium Dioxide is exposed to UV light. Btw, chlorine in swimming pool water depletes this protective coating, so one more reason to reapply your sunscreen after a dip in the pool on holiday.

Other than that, Aluminum Hydroxide also often shows up in composite pigment technologies where it is used the other way around (as the base material and not as the coating material) and helps to achieve higher color coverage with less pigment

What-it-does: viscosity controlling

Polyethylene is the most common plastic in the world. It is a super versatile polymer (molecule from repeated subunits) and when it comes to cosmetics, it is often referred to as microbeads. Well, it used to be referred to as microbeads, as it was banned in 2015 in the " Microbead-Free Waters Act" due to the small plastic spheres accumulating in the waters and looking like food to fish. Well done by Obama. 

But being versatile means that polyethylene does not only come as scrub particles but also as a white wax. In its wax-form, it is still well, alive and pretty popular. It thickens up water-free formulas, increases hardness and raises the melting point of emulsions and water-less balms. It is particularly common in cleansing balms and stick-type makeup products due to its ability to add body, hardness and slip to these formulas. 

What-it-does: surfactant/cleansing

We don't have description for this ingredient yet.

What-it-does: viscosity controlling

A white, elastomeric silicone powder that gives a nice silky and powdery feel to the products. It also has some oil and sebum absorption capabilities. 

What-it-does: emollient

A super common emollient that makes your skin feel nice and smooth. It comes from coconut oil and glycerin, it’s light-textured, clear, odorless and non-greasy. It’s a nice ingredient that just feels good on the skin, is super well tolerated by every skin type and easy to formulate with. No wonder it’s popular. 

Also-called: Salt | What-it-does: viscosity controlling

Sodium chloride is the fancy name of salt. Normal, everyday table salt

If (similar to us) you are in the weird habit of reading the label on your shower gel while taking a shower, you might have noticed that sodium chloride is almost always on the ingredient list. The reason for this is that salt acts as a fantastic thickener in cleansing formulas created with ionic cleansing agents (aka surfactants) such as Sodium Laureth Sulfate. A couple of percents (typically 1-3%) turns a runny surfactant solution into a nice gel texture.

If you are into chemistry (if not, we understand, just skip this paragraph), the reason is that electrolytes (you know, the Na+ and Cl- ions) screen the electrostatic repulsion between the head groups of ionic surfactants and thus support the formation of long shaped micelles (instead of spherical ones) that entangle like spaghetti, and viola, a gel is formed. However, too much of it causes the phenomenon called "salting out", and the surfactant solution goes runny again. 

Other than that, salt also works as an emulsion stabilizer in water-in-oil emulsions, that is when water droplets are dispersed in the outer oil (or silicone) phase. And last but not least, when salt is right at the first spot of the ingredient list (and is not dissolved), the product is usually a body scrub where salt is the physical exfoliating agent

What-it-does: moisturizer/humectant, solvent, viscosity controlling | Irritancy: 0 | Comedogenicity: 0
  • It's a helper ingredient that improves the freeze-thaw stability of products
  • It's also a solvent, humectant and to some extent a penetration enhancer
  • It has a bad reputation among natural cosmetics advocates but cosmetic scientists and toxicology experts do not agree (read more in the geeky details section)
Read all the geeky details about Propylene Glycol here >>

What-it-does: emollient, solvent

A four-unit long, cyclic structured, super light silicone that is the small sister of the more commonly used 5-unit long cyclic structured Cyclopentasiloxane. It is a so-called volatile silicone that evaporates off the skin and hair rather than staying on it.

Similar to other silicones, it has excellent spreading properties and amazing silkiness. It is often blended with other silicones to achieve unique sensorial properties in the formula. 

A white powdery thing that's the major component of glass and sand. In cosmetics, it’s often in products that are supposed to keep your skin matte as it has great oil-absorbing abilities. It’s also used as a helper ingredient to thicken up products or suspend insoluble particles. 

Fragrance - icky
Also-called: Fragrance, Parfum;Parfum/Fragrance | What-it-does: perfuming

Exactly what it sounds: nice smelling stuff put into cosmetic products so that the end product also smells nice. Fragrance in the US and parfum in the EU is a generic term on the ingredient list that is made up of 30 to 50 chemicals on average (but it can have as much as 200 components!). 

If you are someone who likes to know what you put on your face then fragrance is not your best friend - there's no way to know what’s really in it.  

Also, if your skin is sensitive, fragrance is again not your best friend. It’s the number one cause of contact allergy to cosmetics. It’s definitely a smart thing to avoid with sensitive skin (and fragrance of any type - natural is just as allergic as synthetic, if not worse!). 

Also-called: Tinogard TT | What-it-does: antioxidant, preservative

Pentaerythrityl Tetra-Di-T-Butyl Hydroxyhydrocinnamate is an antioxidant molecule used in small amounts (less than 0.8%) to help products stay nice longer. More specifically, it is great at preventing discoloration or other types of oxidative degradation. It is a trendy alternative to often bad-mouthed synthetic antioxidant and stabilizer, BHT

Tocopherol - goodie
Also-called: Vitamin E | What-it-does: antioxidant | Irritancy: 0-3 | Comedogenicity: 0-3
  • Primary fat-soluble antioxidant in our skin
  • Significant photoprotection against UVB rays
  • Vit C + Vit E work in synergy and provide great photoprotection
  • Has emollient properties
  • Easy to formulate, stable and relatively inexpensive
Read all the geeky details about Tocopherol here >>

What-it-does: chelating

A handy helper ingredient that helps products to remain nice and stable for a longer time. It does so by neutralizing the metal ions in the formula (that usually get into there from water) that would otherwise cause some not so nice changes.

We don't have description for this ingredient yet.

What-it-does: perfuming

We don't have description for this ingredient yet.

A spray-dried or freeze-dried version of Aloe Leaf Juice. The point of both drying methods is to make water evaporate from the juice and leave just the "useful" components behind.

So the aloe powder has similar soothing, emollient and moisturizing properties as the juice. You can read a bit more about the juice here. 

We don't have description for this ingredient yet.

Also-called: Wheat Germ Oil | What-it-does: emollient, moisturizer/humectant

We don't have description for this ingredient yet.

Also-called: Roman Chamomile Flower Extract | What-it-does: soothing, perfuming

There are two primary types of Chamomile, the German and the Roman. Both has soothing properties, but the German one contains more anti-inflammatory actives (like chamazulene). The anti-inflammatory action of the Roman Chamomile is due to phenolic compounds and -  according to manufacturer info- it also has some nice skin toning properties.

You may also want to take a look at...

what‑it‑does solvent
Normal (well kind of - it's purified and deionized) water. Usually the main solvent in cosmetic products. [more]
what‑it‑does emollient | solvent
It's a super commonly used water-thin volatile silicone that gives skin and hair a silky, smooth feel.  [more]
what‑it‑does emollient | antimicrobial/antibacterial
An often used emollient with a light and silky feel. It's very mild to both skin and eyes and spreads nicely and easily. It's often used in sunscreens as it's also an excellent solvent for sunscreen agents. 
what‑it‑does sunscreen
irritancy, com. 0, 1
A physical/inorganic sunscreen with the broadest spectrum (UVB and UVA II, less good at UVA I) protection available today. It also has good stability and also works as a skin protectant, anti-irritant. Might leave some whitish tint on the skin, though. [more]
what‑it‑does sunscreen | colorant
A physical/inorganic sunscreen with pretty broad spectrum (UVB and UVA II, less good at UVA I) protection and good stability. Might leave some whitish tint on the skin, though. [more]
what‑it‑does emulsifying
what‑it‑does emollient | viscosity controlling
irritancy, com. 0, 2-3
A common multi-tasker fatty acid that works as an emollient, thickener and emulsion stabilizer. [more]
what‑it‑does emollient | moisturizer/humectant | viscosity controlling
Officially, CosIng (the official EU ingredient database) lists Aluminum Hydroxide 's functions as opacifying (making the product white and non-transparent), as well as emollient and skin protectant. However, with a little bit of digging, it turns out Aluminum Hyroxide often moonlights as a protective coating for UV filter superstar Titanium Dioxide. [more]
what‑it‑does viscosity controlling
The common plastic molecule that is used as a white wax to give hardness and slip to the formulas. It used to be used as microbeads as well but was banned in 2015 due to environmental reasons. [more]
what‑it‑does surfactant/cleansing
what‑it‑does viscosity controlling
A white, elastomeric silicone powder that gives a nice silky and powdery feel to the products. [more]
what‑it‑does emollient
A very common emollient that makes your skin feel nice and smooth. Comes from coconut oil and glycerin, it’s light-textured, clear, odorless and non-greasy. [more]
what‑it‑does viscosity controlling
Sodium chloride is the fancy name of salt. Normal, everyday table salt.  If (similar to us) you are in the weird habit of reading the label on your shower gel while taking a shower, you might have noticed that sodium chloride is almost always on the ingredient list. [more]
what‑it‑does moisturizer/humectant | solvent | viscosity controlling
irritancy, com. 0, 0
A common glycol that improves the freeze-thaw stability of products. It's also a solvent, humectant and to some extent a penetration enhancer. [more]
what‑it‑does emollient | solvent
A four-unit long, cyclic structured, super light silicone that is the small sister of the more commonly used 5-unit long cyclic structured Cyclopentasiloxane. [more]
what‑it‑does viscosity controlling
A white powdery thing that can mattify the skin and thicken up cosmetic products. [more]
what‑it‑does perfuming
The generic term for nice smelling stuff put into cosmetic products so that the end product also smells nice. It is made up of 30 to 50 chemicals on average. [more]
what‑it‑does antioxidant | preservative
Pentaerythrityl Tetra-Di-T-Butyl Hydroxyhydrocinnamate is an antioxidant molecule used in small amounts (less than 0.8%) to help products stay nice longer. More specifically, it is great at preventing discoloration or other types of oxidative degradation. [more]
what‑it‑does antioxidant
irritancy, com. 0-3, 0-3
Pure Vitamin E. Great antioxidant that gives significant photoprotection against UVB rays. Works in synergy with Vitamin C. [more]
what‑it‑does chelating
A helper ingredient that helps to neutralize the metal ions in the formula (that usually get into there from water) that would otherwise cause some not so nice changes.
what‑it‑does preservative | antimicrobial/antibacterial
what‑it‑does perfuming
what‑it‑does soothing | moisturizer/humectant
A spray-dried or freeze-dried version of Aloe Leaf Juice. Has similar soothing, emollient and moisturizing properties as the juice itself. [more]
what‑it‑does emollient | moisturizer/humectant
what‑it‑does emollient | moisturizer/humectant
what‑it‑does soothing | perfuming
Roman Chamomile - thanks to its phenolic compound had some nice soothing and skin toning properties. It contains less anti-inflammatory actives than the German Chamomile. [more]