Follow us on our new Insta page »
Sanicur Original Shower Cream

Original Shower Cream

Ph-neutral shower cream for all skin types.
Uploaded by: elliebellie on

Sanicur Original Shower Cream
Ingredients explained

Also-called: Water | What-it-does: solvent

Good old water, aka H2O. The most common skincare ingredient of all. You can usually find it right in the very first spot of the ingredient list, meaning it’s the biggest thing out of all the stuff that makes up the product. 

It’s mainly a solvent for ingredients that do not like to dissolve in oils but rather in water. 

Also-called: SLES | What-it-does: surfactant/cleansing, emulsifying

It’s probably the most common cleansing ingredient of all. It’s usually the Chief Bubble Officer responsible for big bubbles in cleansing products through the foam it creates is a bit airy and loose and not as dense and luxurious as the foam created by infamous SLS

As for mildness, it goes somewhere in the middle. It’s often confused with sodium lauryl sulfate (SLS), but they are absolutely not the same. The SLES molecule has a bigger water-soluble head part that makes it milder and much less irritating. It is considered absolutely ok in the amount used in cosmetic products, though if you are looking for a mild facial cleanser, you have better chances with a formula without SLES. For an average shower gel? SLES works just fine.  

Also-called: Salt | What-it-does: viscosity controlling

Sodium chloride is the fancy name of salt. Normal, everyday table salt

If (similar to us) you are in the weird habit of reading the label on your shower gel while taking a shower, you might have noticed that sodium chloride is almost always on the ingredient list. The reason for this is that salt acts as a fantastic thickener in cleansing formulas created with ionic cleansing agents (aka surfactants) such as Sodium Laureth Sulfate. A couple of percents (typically 1-3%) turns a runny surfactant solution into a nice gel texture.

Glycerin - superstar
Also-called: Glycerol | What-it-does: skin-identical ingredient, moisturizer/humectant | Irritancy: 0 | Comedogenicity: 0
  • A natural moisturizer that’s also in our skin
  • A super common, safe, effective and cheap molecule used for more than 50 years
  • Not only a simple moisturizer but knows much more: keeps the skin lipids between our skin cells in a healthy (liquid crystal) state, protects against irritation, helps to restore barrier
  • Effective from as low as 3% with even more benefits at higher concentrations up to 20-40% (around 10% is a good usability-effectiveness sweet spot)
  • High-glycerin moisturizers are awesome for treating severely dry skin
Read all the geeky details about Glycerin here >>

Super common ingredient in all kinds of cleansing products: face and body washes, shampoos and foam baths. 

Number one reason for its popularity has to do with bubbles. Everyone loves bubbles. And cocamidopropyl betaine is great at stabilizing them. 

A clear, light yellow water-loving oil that comes from coconut/palm kernel oil and glycerin. It's a mild cleansing agent popular in baby washes and sensitive skin formulas.

It's also a so-called solubilizer that helps to dissolve oils and oil-soluble ingredients (e.g.essential oils or salicylic acid) in water-based formulas. 

What-it-does: surfactant/cleansing

A vegetable origin (coconut/palm kernel oil, glucose) cleansing agent that gives moderate to high stable foam. It's also biodegradable and mild to the skin.

What-it-does: emollient, emulsifying, perfuming

The attachment of glycerin and oleic acid that works mainly as a co-emulsifier and stabilizer to create stable water-oil mixes, aka emulsions. It is also popular in cleansing products as it helps to thicken them up and has some refatting and skin-smoothing effect. 

Tocopherol - goodie
Also-called: Vitamin E | What-it-does: antioxidant | Irritancy: 0-3 | Comedogenicity: 0-3
  • Primary fat-soluble antioxidant in our skin
  • Significant photoprotection against UVB rays
  • Vit C + Vit E work in synergy and provide great photoprotection
  • Has emollient properties
  • Easy to formulate, stable and relatively inexpensive
Read all the geeky details about Tocopherol here >>

What-it-does: emollient

We don't have description for this ingredient yet.

What-it-does: emulsifying

We don't have description for this ingredient yet.

We don't have description for this ingredient yet.

Parfum - icky
Also-called: Fragrance, Parfum;Parfum/Fragrance | What-it-does: perfuming

Exactly what it sounds: nice smelling stuff put into cosmetic products so that the end product also smells nice. Fragrance in the US and parfum in the EU is a generic term on the ingredient list that is made up of 30 to 50 chemicals on average (but it can have as much as 200 components!). 

If you are someone who likes to know what you put on your face then fragrance is not your best friend - there's no way to know what’s really in it.  

What-it-does: preservative

A helper ingredient that helps to make the products stay nice longer, aka preservative. It works mainly against fungi. 

It’s pH dependent and works best at acidic pH levels (3-5). It’s not strong enough to be used in itself so it’s always combined with something else, often with potassium sorbate.

What-it-does: preservative

It's one of those things that help your cosmetics not to go wrong too soon, aka a preservative. It’s not a strong one and doesn’t really work against bacteria, but more against mold and yeast. To do that it has to break down to its active form, sorbic acid. For that to happen, there has to be water in the product and the right pH value (pH 3-4). 

But even if everything is right, it’s not enough on its own. If you see potassium sorbate you should see some other preservative next to it too.

What-it-does: preservative

An Ecocert-approved, natural preservative that counts as gentle and non-irritating to the skin. Usually, it comes to the formula as part of a preservative blend as it's not enough on its own.

Lactic Acid - superstar
  • It’s the second most researched AHA after glycolic acid
  • It gently lifts off dead skin cells to reveal newer, fresher, smoother skin
  • It also has amazing skin hydrating properties
  • In higher concentration (10% and up) it improves skin firmness, thickness and wrinkles
  • Choose a product where you know the concentration and pH value because these two greatly influence effectiveness
  • Don’t forget to use your sunscreen (in any case but especially so next to an AHA product)
Read all the geeky details about Lactic Acid here >>

What-it-does: buffering

Citric acid comes from citrus fruits and is an AHA. If these magic three letters don’t tell you anything, click here and read our detailed description on glycolic acid, the most famous AHA. 

So citric acid is an exfoliant, that can - just like other AHAs - gently lift off the dead skin cells of your skin and make it more smooth and fresh. 

Also-called: lye | What-it-does: buffering

The unfancy name for it is lye. It’s a solid white stuff that’s very alkaline and used in small amounts to adjust the pH of the product and make it just right. 

For example, in case of AHA or BHA exfoliants, the right pH is super-duper important, and pH adjusters like sodium hydroxide are needed.  

You may also want to take a look at...

what‑it‑does solvent
Normal (well kind of - it's purified and deionized) water. Usually the main solvent in cosmetic products. [more]
what‑it‑does surfactant/cleansing | emulsifying
It’s probably the most common cleansing ingredient of all. It’s usually the Chief Bubble Officer responsible for big bubbles in cleansing products through the foam it creates is a bit airy and loose and not as dense and luxurious as the foam created by infamous SLS.  As for mildness, it goes somewhere in the middle. [more]
what‑it‑does viscosity controlling
Sodium chloride is the fancy name of salt. Normal, everyday table salt.  If (similar to us) you are in the weird habit of reading the label on your shower gel while taking a shower, you might have noticed that sodium chloride is almost always on the ingredient list. [more]
what‑it‑does skin-identical ingredient | moisturizer/humectant
irritancy, com. 0, 0
A real oldie but a goodie. Great natural moisturizer and skin-identical ingredient that plays an important role in skin hydration and general skin health. [more]
what‑it‑does surfactant/cleansing | viscosity controlling
Super common ingredient in all kinds of cleansing products: face and body washes, shampoos and foam baths. Number one reason for its popularity has to do with bubbles. [more]
what‑it‑does emulsifying | surfactant/cleansing
A clear, light yellow water-loving oil that comes from coconut/palm kernel oil and glycerin. It's a mild cleansing agent popular in baby washes and sensitive skin formulas. [more]
what‑it‑does surfactant/cleansing
A vegetable origin (coconut/palm kernel oil, glucose) cleansing agent that gives moderate to high stable foam. It's also biodegradable and mild to the skin.
what‑it‑does emollient | emulsifying | perfuming
The attachment of glycerin and oleic acid that works mainly as a co-emulsifier and stabilizer to create stable water-oil mixes, aka emulsions. It is also popular in cleansing products as it helps to thicken them up and has some refatting and skin-smoothing effect.  [more]
what‑it‑does antioxidant
irritancy, com. 0-3, 0-3
Pure Vitamin E. Great antioxidant that gives significant photoprotection against UVB rays. Works in synergy with Vitamin C. [more]
what‑it‑does emollient
what‑it‑does emulsifying
what‑it‑does viscosity controlling
what‑it‑does perfuming
The generic term for nice smelling stuff put into cosmetic products so that the end product also smells nice. It is made up of 30 to 50 chemicals on average. [more]
what‑it‑does preservative
A preservative that works mainly against fungi. Has to be combined with other preservatives. [more]
what‑it‑does preservative
A not so strong preservative that doesn’t really work against bacteria, but more against mold and yeast. [more]
what‑it‑does preservative
An Ecocert-approved, natural preservative that counts as gentle and non-irritating to the skin. Usually, it comes to the formula as part of a preservative blend as it's not enough on its own.
what‑it‑does exfoliant | moisturizer/humectant | buffering
A superstar AHA that not only exfoliates skin but is also a very good moisturizer. In higher concentration (10% and up) it can even improve skin firmness, thickness, and wrinkles. [more]
what‑it‑does buffering
An AHA that comes from citrus fruits. It is usually used as a helper ingredient to adjust the pH of the formula. [more]
what‑it‑does buffering
Lye - A solid white stuff that’s very alkaline and used in small amount to adjust the pH of the product.  [more]