Follow us on our new Insta page »
Mash Sunprotection Lotion SPF 45

Sunprotection Lotion SPF 45

Broad range sun protection uva-uvb filters non greasy finish paba-free hypo-allergic non-comedogenic
Uploaded by: naieramohamed on

Mash Sunprotection Lotion SPF 45
Ingredients explained

Also-called: Water | What-it-does: solvent

Good old water, aka H2O. The most common skincare ingredient of all. You can usually find it right in the very first spot of the ingredient list, meaning it’s the biggest thing out of all the stuff that makes up the product. 

It’s mainly a solvent for ingredients that do not like to dissolve in oils but rather in water. 

Once inside the skin, it hydrates, but not from the outside - putting pure water on the skin (hello long baths!) is drying. 

One more thing: the water used in cosmetics is purified and deionized (it means that almost all of the mineral ions inside it is removed). Like this, the products can stay more stable over time. 

Also-called: Oxybenzone | What-it-does: sunscreen | Irritancy: 0 | Comedogenicity: 0

A chemical sunscreen agent that absorbs UVB and short UVA rays (280-350nm) with its peak protection at 288 nm. Unlike many other chemical sunscreens, it is highly stable but its UV absorbing abilities are weak so it always has to be combined with other sunscreen agents for proper protection. More often than not, it's used as a photostabilizer rather than a proper sunscreen agent as it can protect formulas nicely from UV damage.

Regarding safety, BP-3 is somewhat controversial. First, its molecules are small (228 Da) and very lipophilic (oil loving) and these properties result in very good absorption. The problem is that you want sunscreens on the top of your skin and not in your bloodstream, so for BP-3 this is a problem. In fact, it absorbs so well that 4 hours after application of a sunscreen product with BP-3, it can be detected in urine

Another concern of BP-3 is that it shows some estrogenic activity, though it's probably not relevant when applied topically to the skin. Estrogenic activity was confirmed only in-vitro (in test tubes) and when taken orally by lab animals, and not when used topically as you would normally. In fact, a 2004 follow-up study to examine the estrogenic effect of sunscreens when used topically on the whole body found that "the endogenous levels of reproductive hormones were unaffected" (even though BP-3 could be detected both in plasma and urine, so its absorption is no doubt too good).

If that was not enough, Wikipedia claims that BP-3 is nowadays the most common allergen found in sunscreens, and the always-trustworthy smartskincare writes that "[benzophenones] have been shown in some studies to promote the generation of potentially harmful free radicals".

On the up side, sunscreens are pretty well regulated in several parts of the world, and BP-3 is considered "safe as used" and is an allowed sunscreen agent everywhere. It can be used in concentrations of up to 10% in the EU and up to 6% in the US.

Overall, BP-3 is probably our least favorite sunscreen agent and we prefer sunscreens without it. However, if you find a formula that you love and contains BP-3, we do not think that you should throw it away. A sunscreen with BP-3 is definitely better than no sunscreen. 

What-it-does: emollient, perfuming

A clear, slightly yellow, odorless oil  that's a very common, medium-spreading emollient. It makes the skin feel nice and smooth and works in a wide range of formulas.

What-it-does: sunscreen

An oil-soluble chemical sunscreen agent that protects skin in the UVB and somewhat in the UVA II range with a peak absorption of 304 nm. Its protection is not strong enough on its own but it is quite photostable (loses 10% of SPF protection in 95 mins) and is often used to stabilize other photo-unstable UV-filters, for example, Avobenzone. It is also often used to improve the water resistance of the products. 

Octocrylene's safety profile is generally quite good, though a review study in Contact Dermatitis reports an "increasing number of patients with photo contact allergy to octocrylene." Mainly adults with ketoprofen-sensitivity and children with sensitive skin are affected, so if you have a small kid, it is probably better to use octocrylene-free sunscreens.

What-it-does: sunscreen, colorant

Titanium Dioxide is one of the two members of the elite sunscreen group called physical sunscreens (or inorganic sunscreens if you’re a science geek and want to be precise).

Traditionally, UV-filters are categorized as either chemical or physical. The big difference is supposed to be that chemical agents absorb UV-light while physical agents reflect it like a bunch of mini umbrellas on top of the skin. While this categorization is easy and logical it turns out it's not true. A recent, 2016 study shows that inorganic sunscreens work mostly by absorption, just like chemical filters, and only a little bit by reflection (they do reflect the light in the visible spectrum, but mostly absorb in the UV spectrum).

Anyway, it doesn't matter if it reflects or absorbs, Titanium Dioxide is a pretty awesome sunscreen agent for two main reasons: it gives a nice broad spectrum coverage and it's highly stable. Its protection is very good between 290 - 350 nm (UVB and UVA II range), and less good at 350-400 nm (UVA I) range. Regular sized Titanium Dioxide also has a great safety profile, it's non-irritating and is pretty much free from any health concerns (like estrogenic effect worries with some chemical filters).

The disadvantage of Titanium Dioxide is that it's not cosmetically elegant, meaning it's a white, "unspreadable" mess. Sunscreens containing Titanium Dioxide are often hard to spread on the skin and they leave a disturbing whitish tint. The cosmetic industry is, of course, really trying to solve this problem and the best solution so far is using nanoparticles. The itsy-bitsy Nano-sized particles improve both spreadability and reduce the whitish tint a lot, but unfortunately, it also introduces new health concerns. 

The main concern with nanoparticles is that they are so tiny that they are absorbed into the skin more than we want them (ideally sunscreen should remain on the surface of the skin). Once absorbed they might form unwanted complexes with proteins and they might promote the formation of evil free radicals. But do not panic, these are concerns under investigation. A 2009 review article about the safety of nanoparticles summarizes this, "to date, in-vivo and in-vitro studies have not demonstrated percutaneous penetration of nanosized particles in titanium dioxide and zinc oxide sunscreens". The English translation is, so far it looks like sunscreens with nanoparticles do stay on the surface of the skin where they should be.  

All in all, Titanium Dioxide is a famous sunscreen agent and for good reason, it gives broad spectrum UV protection (best at UVB and UVA II), it's highly stable, and it has a good safety profile. It's definitely one of the best UV-filter agents we have today, especially in the US where new-generation Tinosorb filters are not (yet) approved. 

Also-called: Triticum Vulgare Germ Oil | What-it-does: emollient, moisturizer/humectant

We don't have description for this ingredient yet.

Vit E - goodie
Also-called: Vitamin E;Tocopherol | What-it-does: antioxidant | Irritancy: 0-3 | Comedogenicity: 0-3
  • Primary fat-soluble antioxidant in our skin
  • Significant photoprotection against UVB rays
  • Vit C + Vit E work in synergy and provide great photoprotection
  • Has emollient properties
  • Easy to formulate, stable and relatively inexpensive
Read all the geeky details about Tocopherol here >>

We don't have description for this ingredient yet.

Also-called: Mineral Oil;Paraffinum Liquidum | What-it-does: emollient, solvent | Irritancy: 0 | Comedogenicity: 0-2

The famous or maybe rather infamous mineral oil. The clear oily liquid that is the "cheap by-product" of refining crude oil and the one that gets a lot of heat for its poor provenance. It is a very controversial ingredient with pros and cons and plenty of myths around it. So let us see them:  

The pros of mineral oil
Trust us, if something is used for more than 100 years in cosmetic products, it has advantages. Chemically speaking, cosmetic grade mineral oil is a complex mixture of highly refined saturated hydrocarbons with C15-50 chain length. It is not merely a "by-product" but rather a specifically isolated part of petroleum that is very pure and inert.

It is a great emollient and moisturizer working mainly by occlusivity. Occlusivity is one of the basic mechanisms of how moisturizers work and it means that mineral oil sits on top of the skin and hinders so-called trans-epidermal water loss, i.e water evaporating out of your skin. When compared to heavy-duty plant oil, extra virgin coconut oil, the two of them were equally efficient and safe as moisturizers in treating xerosis, a skin condition connected to very dry skin.

The other thing that mineral oil is really good at is being non-irritating to the skin. The chemical composition of plant oils is more complex with many more possible allergens or irritating components, while mineral oil is simple, pure and sensitivity to it is extremely rare. If you check out the classic French pharmacy brands and their moisturizers for the most sensitive, allergy prone skin, they usually contain mineral oil. This is no coincidence. 

The cons of mineral oil
The pros of mineral oil can be interpreted as cons if we look at them from another perspective. Not penetrating the skin but mostly just sitting on top of it and not containing biologically active components, like nice fatty acids and vitamins mean that mineral oil does not "nourish" the skin in the way plant oils do. Mineral oil does not give the skin any extra goodness, it is simply a non-irritating moisturizer working mainly by occlusivity. 

The myths around mineral oil
Badmouthing mineral oil is a favorite sport of many, it is a cheap material and being connected to petrolatum makes it fairly easy to demonize. 

While it is true that industrial grade mineral oil contains carcinogenic components (so-called polycyclic compounds), these are completely removed from cosmetic and food grade mineral oil and there is no scientific data showing that the pure, cosmetic grade version is carcinogenic.

What is more, in terms of the general health effects of mineral oils used in cosmetics, a 2017 study reviewed the data on their skin penetration and concluded that "the cosmetic use of mineral oils and waxes does not present a risk to consumers due to a lack of systemic exposure."  

Another super common myth surrounding mineral oil is that it is comedogenic. A 2005 study titled "Is mineral oil comedogenic?" examined this very question and guess what happened? The study concluded that  "based on the animal and human data reported, along with the AAD recommendation, it would appear reasonable to conclude that mineral oil is noncomedogenic in humans.

Overall, we feel that the scaremongering around mineral oil is not justified. For dry and super-sensitive skin types it is a great option. However, if you do not like its origin or its heavy feeling or anything else about it, avoiding it has never been easier. Mineral oil has such a bad reputation nowadays that cosmetic companies hardly dare to use it anymore. 

This ingredient name is not according to the INCI-standard. :( What, why?!

A glycerin molecule combined with three fatty acids. It is the chemical structure of oils and does not denote an ingredient. 

What-it-does: emollient | Irritancy: 0 | Comedogenicity: 1

Probably the most common silicone of all. It is a polymer (created from repeating subunits) molecule and has different molecular weight and thus different viscosity versions from water-light to thick liquid.

As for skincare, it makes the skin silky smooth, creates a subtle gloss and forms a protective barrier (aka occlusive). Also, works well to fill in fine lines and wrinkles and give skin a plump look (of course that is only temporary, but still, it's nice). There are also scar treatment gels out there using dimethicone as their base ingredient. It helps to soften scars and increase their elasticity. 

As for hair care, it is a non-volatile silicone meaning that it stays on the hair rather than evaporates from it and smoothes the hair like no other thing. Depending on your hair type, it can be a bit difficult to wash out and might cause some build-up (btw, this is not true to all silicones, only the non-volatile types). 

What-it-does: emollient, emulsifying | Irritancy: 0 | Comedogenicity: 1-2

A super common, waxy, white, solid stuff that helps water and oil to mix together, gives body to creams and leaves the skin feeling soft and smooth.

Chemically speaking, it is the attachment of a glycerin molecule to the fatty acid called stearic acid. It can be produced from most vegetable oils (in oils three fatty acid molecules are attached to glycerin instead of just one like here) in a pretty simple, "green" process that is similar to soap making. It's readily biodegradable.

It also occurs naturally in our body and is used as a food additive. As cosmetic chemist Colins writes it, "its safety really is beyond any doubt".

Allantoin - goodie
What-it-does: soothing | Irritancy: 0 | Comedogenicity: 0

Super common soothing ingredient. It can be found naturally in the roots & leaves of the comfrey plant, but more often than not what's in the cosmetic products is produced synthetically. 

It's not only soothing but it' also skin-softening and protecting and can promote wound healing.

Glycerin - superstar
Also-called: Glycerol | What-it-does: skin-identical ingredient, moisturizer/humectant | Irritancy: 0 | Comedogenicity: 0
  • A natural moisturizer that’s also in our skin
  • A super common, safe, effective and cheap molecule used for more than 50 years
  • Not only a simple moisturizer but knows much more: keeps the skin lipids between our skin cells in a healthy (liquid crystal) state, protects against irritation, helps to restore barrier
  • Effective from as low as 3% with even more benefits at higher concentrations up to 20-40% (around 10% is a good usability-effectiveness sweet spot)
  • High-glycerin moisturizers are awesome for treating severely dry skin
Read all the geeky details about Glycerin here >>

What-it-does: moisturizer/humectant, solvent, viscosity controlling | Irritancy: 0 | Comedogenicity: 0
  • It's a helper ingredient that improves the freeze-thaw stability of products
  • It's also a solvent, humectant and to some extent a penetration enhancer
  • It has a bad reputation among natural cosmetics advocates but cosmetic scientists and toxicology experts do not agree (read more in the geeky details section)
Read all the geeky details about Propylene Glycol here >>

D-Panthenol - goodie
Also-called: Pro-Vitamin B5;Panthenol | What-it-does: soothing, moisturizer/humectant | Irritancy: 0 | Comedogenicity: 0

An easy-to-formulate, commonly used, nice to have ingredient that’s also called pro-vitamin B5. As you might guess from the “pro” part, it’s a precursor to vitamin B5 (whose fancy name is pantothenic acid). 

Its main job in skincare products is to moisturise the skin. It’s a humectant meaning that it can help the skin to attract water and then hold onto it. There is also research showing that panthenol can help our skin to produce more lovely lipids that are important for a strong and healthy skin barrier. 

Another great thing about panthenol is that it has anti-inflammatory and skin protecting abilities. A study shows that it can reduce the irritation caused by less-nice other ingredients (e.g. fragrance, preservatives or chemical sunscreens) in the product.

Research also shows that it might be useful for wound healing as it promotes fibroblast (nice type of cells in our skin that produce skin-firming collagen) proliferation. 

If that wasn’t enough panthenol is also useful in nail and hair care products. A study shows that a nail treatment liquide with 2% panthenol could effectively get into the nail and significantly increase the hydration of it.

As for the hair the hydration effect is also true there. Panthenol might make your hair softer, more elastic and helps to comb your hair more easily. 

This ingredient name is not according to the INCI-standard. :( What, why?!

What-it-does: chelating

An abbreviation that pops up on a lot of ingredient lists. It stands for EthyleneDiamineTetraacetic Acid and it's a famous molecule for being an excellent chelating agent, i.e. a molecule that can bind to metal ions (coming usually from water) and make them harmless in a cosmetic formula. With a chelating agent, cosmetic formulas stay nice longer.

EDTA is an acid molecule and its salt versions are even more often used, such as the super common Disodium EDTA

What-it-does: preservative | Irritancy: 0 | Comedogenicity: 0

The most common type of feared-by-everyone-mostly-without-scientific-reason parabens. It's a cheap, effective and well-tolerated ingredient to make sure the cosmetic formula does not go wrong too soon

Apart from the general controversy around parabens (we wrote about it more here), there is a 2006 in-vitro (made in the lab not on real people) research about methylparaben (MP) showing that when exposed to sunlight, MP treated skin cells suffered more harm than non-MP treated skin cells. The study was not done with real people on real skin but still - using a good sunscreen next to MP containing products is a good idea. (Well, in fact using a sunscreen is always a good idea. :))

What-it-does: emollient, viscosity controlling, emulsifying, surfactant/cleansing | Irritancy: 0 | Comedogenicity: 1

A chemically modified version of castor oil that results in a solid, waxy material that serves as an emollient and consistency building material.

It also has some unique moisturizing properties as it is both occlusive and humectant.  The former one is common for oils and waxes and it means that it sits on top of the skin hindering water to evaporate out of the top layers. The latter one, the humectant property, is surprising and comes from the unique property of ricinoleic acid (the dominant fatty acid in castor oil)  having an extra water-loving -OH group on its otherwise oil-loving fatty chain. We have some more info about this at castor oil, so if you are interested, read on here.  

What-it-does: preservative, perfuming | Irritancy: 0 | Comedogenicity: 0

A very common type of feared-by-everyone-mostly-without-scientific-reason parabens. It's a cheap, effective and well-tolerated ingredient to make sure the cosmetic formula does not go wrong too soon.

Fragrance - icky
Also-called: Fragrance, Parfum;Parfum/Fragrance | What-it-does: perfuming

Exactly what it sounds: nice smelling stuff put into cosmetic products so that the end product also smells nice. Fragrance in the US and parfum in the EU is a generic term on the ingredient list that is made up of 30 to 50 chemicals on average (but it can have as much as 200 components!). 

If you are someone who likes to know what you put on your face then fragrance is not your best friend - there's no way to know what’s really in it.  

Also, if your skin is sensitive, fragrance is again not your best friend. It’s the number one cause of contact allergy to cosmetics. It’s definitely a smart thing to avoid with sensitive skin (and fragrance of any type - natural is just as allergic as synthetic, if not worse!). 

What-it-does: viscosity controlling, emulsion stabilising | Irritancy: 0 | Comedogenicity: 1

A big molecule created from repeated subunits (a polymer of acrylic acid) that magically converts a liquid into a nice gel formula.  It usually has to be neutralized with a base (such as sodium hydroxide) for the thickening to occur and it creates viscous, clear gels that also feel nice and non-tacky on the skin. No wonder, it is a very popular and common ingredient. Typically used at 1% or less in most formulations.

Also-called: lye | What-it-does: buffering

The unfancy name for it is lye. It’s a solid white stuff that’s very alkaline and used in small amounts to adjust the pH of the product and make it just right. 

For example, in case of AHA or BHA exfoliants, the right pH is super-duper important, and pH adjusters like sodium hydroxide are needed.  

BTW, lye is not something new. It was already used by ancient Egyptians to help oil and fat magically turn into something else. Can you guess what? Yes, it’s soap. It still often shows up in the ingredient list of soaps and other cleansers.

Sodium hydroxide in itself is a potent skin irritant, but once it's reacted (as it is usually in skin care products, like exfoliants) it is totally harmless.

You may also want to take a look at...

what‑it‑does solvent
Normal (well kind of - it's purified and deionized) water. Usually the main solvent in cosmetic products. [more]
what‑it‑does sunscreen
irritancy, com. 0, 0
A chemical sunscreen agent that absorbs UVB and short UVA rays (280-350nm). It's a highly stable but weak UVB absorber, that's often used as a photostabilizer in non-sunscreen proudcts. [more]
what‑it‑does emollient | perfuming
A clear, slightly yellow, odorless oil  that's a very common, medium-spreading emollient. It makes the skin feel nice and smooth and works in a wide range of formulas.
what‑it‑does sunscreen
An oil-soluble chemical sunscreen agent that protects skin in the UVB and somewhat in the UVA II range with a peak absorption of 304 nm. [more]
what‑it‑does sunscreen | colorant
A physical/inorganic sunscreen with pretty broad spectrum (UVB and UVA II, less good at UVA I) protection and good stability. Might leave some whitish tint on the skin, though. [more]
what‑it‑does emollient | moisturizer/humectant
what‑it‑does antioxidant
irritancy, com. 0-3, 0-3
Pure Vitamin E. Great antioxidant that gives significant photoprotection against UVB rays. Works in synergy with Vitamin C. [more]
what‑it‑does surfactant/cleansing | emulsifying
what‑it‑does emollient | solvent
irritancy, com. 0, 0-2
A clear, oily liquid that comes from refining crude oil. Even though it is a highly controversial ingredient, the scientific consensus is that it is a safe, non-irritating and effective emollient and moisturizer working mainly by occlusivity. [more]
A glycerin molecule combined with three fatty acids. It is the chemical structure of oils and does not denote an ingredient.  [more]
what‑it‑does emollient
irritancy, com. 0, 1
A very common silicone that gives both skin and hair a silky smooth feel. It also forms a protective barrier on the skin and fills in fine lines. Also used for scar treatment. [more]
what‑it‑does emollient | emulsifying
irritancy, com. 0, 1-2
Waxy, white, solid stuff that helps water and oil to mix together and leaves the skin feeling soft and smooth. [more]
what‑it‑does soothing
irritancy, com. 0, 0
Super common soothing ingredient. It can be found naturally in the roots & leaves of the comfrey plant, but more often than not what's in the cosmetic products is produced synthetically. It's not only soothing but it' [more]
what‑it‑does skin-identical ingredient | moisturizer/humectant
irritancy, com. 0, 0
A real oldie but a goodie. Great natural moisturizer and skin-identical ingredient that plays an important role in skin hydration and general skin health. [more]
what‑it‑does moisturizer/humectant | solvent | viscosity controlling
irritancy, com. 0, 0
A common glycol that improves the freeze-thaw stability of products. It's also a solvent, humectant and to some extent a penetration enhancer. [more]
what‑it‑does soothing | moisturizer/humectant
irritancy, com. 0, 0
Pro-Vitamin B5 is a goodie that moisturises the skin, has anti-inflammatory, skin protecting and wound healing properties. [more]
what‑it‑does chelating
An abbreviation that pops up on a lot of ingredient lists. It stands for EthyleneDiamineTetraacetic Acid and it's a famous molecule for being an excellent chelating agent, i.e. a molecule that can bind to metal ions (coming usually from water) and make them harmless in a cosmetic formula. [more]
what‑it‑does preservative
irritancy, com. 0, 0
The most common type of feared-by-everyone-mostly-without-scientific-reason parabens. It's a cheap, effective and well-tolerated ingredient to make sure the cosmetic formula does not go wrong too soon.  Apart from the general controversy around parabens (we wrote about it more here), there is a 2006 in-vitro (made in the lab not on real people) research about methylparaben (MP) sho [more]
what‑it‑does emollient | viscosity controlling | emulsifying | surfactant/cleansing
irritancy, com. 0, 1
A chemically modified version of castor oil that results in a solid, waxy material that serves as an emollient and consistency building material. It also has some unique moisturizing properties as it is both occlusive and humectant.  The former one is common for oils and waxes and it means that it sits on top of the skin hindering water to evaporate out of the top layers. [more]
what‑it‑does preservative | perfuming
irritancy, com. 0, 0
A very common type of feared-by-everyone-mostly-without-scientific-reason parabens. It's a cheap, effective and well-tolerated ingredient to make sure the cosmetic formula does not go wrong too soon. [more]
what‑it‑does perfuming
The generic term for nice smelling stuff put into cosmetic products so that the end product also smells nice. It is made up of 30 to 50 chemicals on average. [more]
what‑it‑does viscosity controlling
irritancy, com. 0, 1
A handy white powder that magically converts a liquid into a nice gel formula. [more]
what‑it‑does buffering
Lye - A solid white stuff that’s very alkaline and used in small amount to adjust the pH of the product.  [more]