Follow us on our new Insta page »
Laura mercier Tinted Moisturizer SPF 20

Laura mercier
Tinted Moisturizer SPF 20

Sheer coverage multi-tasker for a healthy, no-makeup look with a natural dewy finish.
Uploaded by: slickc on 15/11/2018

Laura mercier Tinted Moisturizer SPF 20
Ingredients explained

Also-called: Octinoxate, Octyl Methoxycinnamate;Ethylhexyl Methoxycinnamate | What-it-does: sunscreen | Irritancy: 0 | Comedogenicity: 0

A clear, oil-soluble, "cosmetically-elegant" liquid that is the most commonly used chemical sunscreen. It absorbs UVB radiation (at wavelengths: 280-320 nm) with a peak protection at 310nm. 

It only protects against UVB and not UVA rays (the 320-400 nm range) – so always choose products that contain other sunscreens too. It is not very stable either, when exposed to sunlight, it kind of breaks down and loses its effectiveness (not instantly, but over time - it loses 10% of its SPF protection ability within 35 mins). To make it more stable it can be - and should be - combined with other sunscreen agents to give stable and broad-spectrum protection (the new generation sunscreen agent, Tinosorb S is a particularly good one for that).

Expand to read more

Regarding safety, there are also some concerns around Octinoxate. In vitro (made in the lab not on real people) and animal studies have shown that it may produce hormonal (estrogen-like) effects. Do not panic, the studies were not conducted under real life conditions on real human people, so it is probably over-cautious to avoid Octinoxate altogether. However, if you are pregnant or a small child (under 2 yrs. old), choose a physical (zinc oxide/titanium dioxide) or new-generation Tinosorb based sunscreen, just to be on the super-safe side. :) 

Overall, Ethylhexyl Methoxycinnamate is an old-school chemical sunscreen agent. There are plenty of better options for sun protection today, but it is considered "safe as used" (and sunscreens are pretty well regulated) and it is available worldwide (can be used up to 10% in the EU and up to 7.5% in the US).

We don't have description for this ingredient yet.

Also-called: Aqua;Water | What-it-does: solvent

Good old water, aka H2O. The most common skincare ingredient of all. You can usually find it right in the very first spot of the ingredient list, meaning it’s the biggest thing out of all the stuff that makes up the product. 

It’s mainly a solvent for ingredients that do not like to dissolve in oils but rather in water. 

Expand to read more

Once inside the skin, it hydrates, but not from the outside - putting pure water on the skin (hello long baths!) is drying. 

One more thing: the water used in cosmetics is purified and deionized (it means that almost all of the mineral ions inside it is removed). Like this, the products can stay more stable over time. 

What-it-does: emollient, viscosity controlling | Irritancy: 1 | Comedogenicity: 2

An extremely common multitasker ingredient that gives your skin a nice soft feel (emollient) and gives body to creams and lotions. It also helps to stabilize oil-water mixes (emulsions), though it does not function as an emulsifier in itself. Its typical use level in most cream type formulas is 2-3%.  

It’s a so-called fatty alcohol, a mix of cetyl and stearyl alcohol, other two emollient fatty alcohols.  Though chemically speaking, it is alcohol (as in, it has an -OH group in its molecule), its properties are totally different from the properties of low molecular weight or drying alcohols such as denat. alcohol. Fatty alcohols have a long oil-soluble (and thus emollient) tail part that makes them absolutely non-drying and non-irritating and are totally ok for the skin.

What-it-does: emulsifying, surfactant/cleansing | Irritancy: 0 | Comedogenicity: 0

We don't have description for this ingredient yet.

What-it-does: emollient | Irritancy: 0 | Comedogenicity: 1

Probably the most common silicone of all. It is a polymer (created from repeating subunits) molecule and has different molecular weight and thus different viscosity versions from water-light to thick liquid.

As for skincare, it makes the skin silky smooth, creates a subtle gloss and forms a protective barrier (aka occlusive). Also, works well to fill in fine lines and wrinkles and give skin a plump look (of course that is only temporary, but still, it's nice). There are also scar treatment gels out there using dimethicone as their base ingredient. It helps to soften scars and increase their elasticity. 

Expand to read more

As for hair care, it is a non-volatile silicone meaning that it stays on the hair rather than evaporates from it and smoothes the hair like no other thing. Depending on your hair type, it can be a bit difficult to wash out and might cause some build-up (btw, this is not true to all silicones, only the non-volatile types). 

What-it-does: emulsifying

We don't have description for this ingredient yet.

What-it-does: emollient, moisturizer/humectant, solvent, viscosity controlling | Irritancy: 0 | Comedogenicity: 0

Cyclomethicone is not one type of silicone, but a whole mixture of them: it's a mix of specific chain length (4 to 7) cyclic structured silicone molecules. (There seems to be a confusion on the internet whether Cyclomethicone and Cyclopentasiloxane are the same. They are not the same, but Cyclopentasiloxane is part of the mixture that makes up Cyclomethicone). 

All the silicones in the Cyclomethicone mixture are volatile, meaning they evaporate from the skin or hair rather than stay on it. This means that Cyclomethicone has a light skin feel with none-to-minimal after-feel.  It also makes the formulas easy to spread and has nice emollient properties.

What-it-does: emulsifying

We don't have description for this ingredient yet.

What-it-does: emollient

A fast spreading emollient ester (hexyl alcohol + lauric acid) that's used in water in oil emulsions or in water-free formulas. It gives a light skin feel. 

Also-called: Vitamin E Acetate | What-it-does: antioxidant | Irritancy: 0 | Comedogenicity: 0

It’s the most commonly used version of pure vitamin E in cosmetics. You can read all about the pure form here. This one is the so-called esterified version. 

According to famous dermatologist, Leslie Baumann while tocopheryl acetate is more stable and has a longer shelf life, it’s also more poorly absorbed by the skin and may not have the same awesome photoprotective effects as pure Vit E. 

Also-called: Geogard 111S | What-it-does: preservative

A helper ingredient that helps to make the products stay nice longer, aka preservative. It works mainly against fungi and has only milder effect against bacteria. 

It is Ecocert and Cosmos approved, and is popular in natural products. 

What-it-does: skin-identical ingredient, moisturizer/humectant | Irritancy: 0 | Comedogenicity: 0

It’s the - sodium form - cousin of the famous NMFhyaluronic acid (HA). If HA does not tell you anything we have a super detailed, geeky explanation about it here.  The TL; DR version of HA is that it's a huge polymer (big molecule from repeated subunits) found in the skin that acts as a sponge helping the skin to hold onto water, being plump and elastic. HA is famous for its crazy water holding capacity as it can bind up to 1000 times its own weight in water.

As far as skincare goes, sodium hyaluronate and hyaluronic acid are pretty much the same and the two names are used interchangeably. As cosmetic chemist kindofstephen writes on reddit  "sodium hyaluronate disassociates into hyaluronic acid molecule and a sodium atom in solution". 

Expand to read more

In spite of this, if you search for "hyaluronic acid vs sodium hyaluronate" you will find on multiple places that sodium hyaluronate is smaller and can penetrate the skin better. Chemically, this is definitely not true, as the two forms are almost the same, both are polymers and the subunits can be repeated in both forms as much as you like. (We also checked Prospector for sodium hyaluronate versions actually used in cosmetic products and found that the most common molecular weight was 1.5-1.8 million Da that absolutely counts as high molecular weight).

What seems to be a true difference, though, is that the salt form is more stable, easier to formulate and cheaper so it pops up more often on the ingredient lists. 

If you wanna become a real HA-and-the-skin expert you can read way more about the topic at hyaluronic acid (including penetration-questions, differences between high and low molecular weight versions and a bunch of references to scientific literature).

Allantoin - goodie
What-it-does: soothing | Irritancy: 0 | Comedogenicity: 0

Super common soothing ingredient. It can be found naturally in the roots & leaves of the comfrey plant, but more often than not what's in the cosmetic products is produced synthetically. 

It's not only soothing but it' also skin-softening and protecting and can promote wound healing.

What-it-does: viscosity controlling | Irritancy: 0 | Comedogenicity: 1

A big molecule created from repeated subunits (a polymer of acrylic acid) that magically converts a liquid into a nice gel formula.  It usually has to be neutralized with a base (such as sodium hydroxide) for the thickening to occur and it creates viscous, clear gels that also feel nice and non-tacky on the skin. No wonder, it is a very popular and common ingredient.

What-it-does: preservative | Irritancy: 0 | Comedogenicity: 0

The most common type of feared-by-everyone-mostly-without-scientific-reason parabens. It's a cheap, effective and well-tolerated ingredient to make sure the cosmetic formula does not go wrong too soon

Apart from the general controversy around parabens (we wrote about it more here), there is a 2006 in-vitro (made in the lab not on real people) research about methylparaben (MP) showing that when exposed to sunlight, MP treated skin cells suffered more harm than non-MP treated skin cells. The study was not done with real people on real skin but still - using a good sunscreen next to MP containing products is a good idea. (Well, in fact using a sunscreen is always a good idea. :))

What-it-does: viscosity controlling, absorbent/mattifier | Irritancy: 0 | Comedogenicity: 0

A type of clay mineral that works as a nice helper ingredient to thicken and stabilize formulas. As a clay, it consists of platelets that have a negative charge on the surface (face) and a positive on the edge. So the face of one platelet attracts the edge of the other and this builds a so-called "house of card" structure meaning that Magnesium Aluminum Silicate (MAS) thickens up products and helps to suspend non-soluble particles such as color pigments or inorganic sunscreens (zinc oxide and titanium dioxide).

As the "house of card" structure takes some time to form but collapses quickly if the formula is stirred, products thickened with MAS can be thick in the jar but become easily spreadable upon application (called thixotropy). MAS also gives nice sensory properties, it is not tacky or sticky and gives a rich, creamy skin feel. Also a good team player and works in synergy with other thickeners such as Cellulose Gum or Xanthan Gum

What-it-does: antioxidant

We don't have description for this ingredient yet.

What-it-does: preservative | Irritancy: 0 | Comedogenicity: 0

A very common type of feared-by-everyone-mostly-without-scientific-reason parabens. It's a cheap, effective and well-tolerated ingredient to make sure the cosmetic formula does not go wrong too soon.

What-it-does: sunscreen

Titanium Dioxide is one of the two members of the elite sunscreen group called physical sunscreens (or inorganic sunscreens if you’re a science geek and want to be precise).

Traditionally, UV-filters are categorized as either chemical or physical. The big difference is supposed to be that chemical agents absorb UV-light while physical agents reflect it like a bunch of mini umbrellas on top of the skin. While this categorization is easy and logical it turns out it's not true. A recent, 2016 study shows that inorganic sunscreens work mostly by absorption, just like chemical filters, and only a little bit by reflection (they do reflect the light in the visible spectrum, but mostly absorb in the UV spectrum).

Expand to read more

Anyway, it doesn't matter if it reflects or absorbs, Titanium Dioxide is a pretty awesome sunscreen agent for two main reasons: it gives a nice broad spectrum coverage and it's highly stable. Its protection is very good between 290 - 350 nm (UVB and UVA II range), and less good at 350-400 nm (UVA I) range. Regular sized Titanium Dioxide also has a great safety profile, it's non-irritating and is pretty much free from any health concerns (like estrogenic effect worries with some chemical filters).

The disadvantage of Titanium Dioxide is that it's not cosmetically elegant, meaning it's a white, "unspreadable" mess. Sunscreens containing Titanium Dioxide are often hard to spread on the skin and they leave a disturbing whitish tint. The cosmetic industry is, of course, really trying to solve this problem and the best solution so far is using nanoparticles. The itsy-bitsy Nano-sized particles improve both spreadability and reduce the whitish tint a lot, but unfortunately, it also introduces new health concerns. 

The main concern with nanoparticles is that they are so tiny that they are absorbed into the skin more than we want them (ideally sunscreen should remain on the surface of the skin). Once absorbed they might form unwanted complexes with proteins and they might promote the formation of evil free radicals. But do not panic, these are concerns under investigation. A 2009 review article about the safety of nanoparticles summarizes this, "to date, in-vivo and in-vitro studies have not demonstrated percutaneous penetration of nanosized particles in titanium dioxide and zinc oxide sunscreens". The English translation is, so far it looks like sunscreens with nanoparticles do stay on the surface of the skin where they should be.  

All in all, Titanium Dioxide is a famous sunscreen agent and for good reason, it gives broad spectrum UV protection (best at UVB and UVA II), it's highly stable, and it has a good safety profile. It's definitely one of the best UV-filter agents we have today, especially in the US where new-generation Tinosorb filters are not (yet) approved. 

Also-called: Ci 77491/77492/77499 | What-it-does: colorant | Irritancy: 0 | Comedogenicity: 0

A bit of a sloppy ingredient name as it covers not one but three pigments: red, yellow and black iron oxide.

The trio is invaluable for "skin-colored" makeup products  (think your foundation and pressed powder) as blending these three shades carefully can produce almost any shade of natural-looking flesh tones. 

Also-called: CI 77019

A super versatile and common mineral powder that comes in different particle sizes. It is a multi-tasker used to improve skin feel, increase product slip, give the product light-reflecting properties, enhance skin adhesion or serve as an anti-caking agent.

It is also the most commonly used "base" material for layered composite pigments such as pearl-effect pigments. In this case, mica is coated with one or more metal oxides (most commonly titanium dioxide) to achieve pearl effect via the physical phenomenon known as interference. 

You may also want to take a look at...

what‑it‑does sunscreen
irritancy, com. 0, 0
Octinoxate - an old-school chemical sunscreen that absorbs UVB radiation (wavelengths: 280-320 nm). Not photostable and does not protect against UVA. [more]
what‑it‑does solvent
Normal (well kind of - it's purified and deionized) water. Usually the main solvent in cosmetic products. [more]
what‑it‑does emollient | viscosity controlling
irritancy, com. 1, 2
A super common multitasker ingredient that gives your skin a nice soft feel (emollient) and gives body to creams. [more]
what‑it‑does emulsifying | surfactant/cleansing
irritancy, com. 0, 0
what‑it‑does emollient
irritancy, com. 0, 1
A very common silicone that gives both skin and hair a silky smooth feel. It also forms a protective barrier on the skin and fills in fine lines. Also used for scar treatment. [more]
what‑it‑does emulsifying
what‑it‑does emollient | moisturizer/humectant | solvent | viscosity controlling
irritancy, com. 0, 0
A mixture of 4 to 7 chain length cyclic silicones. It's a light, volatile ingredient that gives skin or hair a smooth feel and has emollient properties. [more]
what‑it‑does emulsifying
what‑it‑does emollient
A fast spreading emollient ester (hexyl alcohol + lauric acid) that's used in water in oil emulsions or in water-free formulas. It gives a light skin feel. 
what‑it‑does antioxidant
irritancy, com. 0, 0
A form of vitamin E that works as an antioxidant. Compared to the pure form it's more stable, has longer shelf life, but it's also more poorly absorbed by the skin. [more]
what‑it‑does preservative
A helper ingredient that helps to make the products stay nice longer, aka preservative. It works mainly against fungi and has only milder effect against bacteria.  It is Ecocert and Cosmos approved, and is popular in natural products.  [more]
what‑it‑does skin-identical ingredient | moisturizer/humectant
irritancy, com. 0, 0
It's the salt form of famous humectant and natural moisturizing factor, hyaluronic acid. It can bind huge amounts of water and it's pretty much the current IT-moisturizer. [more]
what‑it‑does soothing
irritancy, com. 0, 0
Super common soothing ingredient. It can be found naturally in the roots & leaves of the comfrey plant, but more often than not what's in the cosmetic products is produced synthetically. It's not only soothing but it' [more]
what‑it‑does viscosity controlling
irritancy, com. 0, 1
A handy white powder that magically converts a liquid into a nice gel formula. [more]
what‑it‑does preservative
irritancy, com. 0, 0
The most common type of feared-by-everyone-mostly-without-scientific-reason parabens. It's a cheap, effective and well-tolerated ingredient to make sure the cosmetic formula does not go wrong too soon.  Apart from the general controversy around parabens (we wrote about it more here), there is a 2006 in-vitro (made in the lab not on real people) research about methylparaben (MP) sho [more]
what‑it‑does viscosity controlling
irritancy, com. 0, 0
A type of clay mineral that works as a nice helper ingredient to thicken and stabilize formulas. As a clay, it consists of platelets that have a negative charge on the surface (face) and a positive on the edge. [more]
what‑it‑does antioxidant
what‑it‑does preservative
irritancy, com. 0, 0
A very common type of feared-by-everyone-mostly-without-scientific-reason parabens. It's a cheap, effective and well-tolerated ingredient to make sure the cosmetic formula does not go wrong too soon. [more]
what‑it‑does sunscreen
A physical/inorganic sunscreen with pretty broad spectrum (UVB and UVA II, less good at UVA I) protection and good stability. Might leave some whitish tint on the skin, though. [more]
what‑it‑does colorant
irritancy, com. 0, 0
A mix of red, yellow and black iron oxide. [more]
A mineral powder used to improve skin feel, increase product slip, give the product some light-reflecting properties, enhance skin adhesion or serve as an anti-caking agent. A real multi-tasker. [more]