Follow us on our new Insta page »
ACO Special Care Anti Dandruff Shampoo

ACO
Special Care Anti Dandruff Shampoo

A perfume-free and mild anti-dandruff shampoo, suitable for sensitive scalps.
Uploaded by: resmiravi025 on

ACO Special Care Anti Dandruff Shampoo
Ingredients explained

Also-called: Water | What-it-does: solvent

Good old water, aka H2O. The most common skincare ingredient of all. You can usually find it right in the very first spot of the ingredient list, meaning it’s the biggest thing out of all the stuff that makes up the product. 

It’s mainly a solvent for ingredients that do not like to dissolve in oils but rather in water. 

Also-called: SLES | What-it-does: surfactant/cleansing, emulsifying

It’s probably the most common cleansing ingredient of all. It’s usually the Chief Bubble Officer responsible for big bubbles in cleansing products through the foam it creates is a bit airy and loose and not as dense and luxurious as the foam created by infamous SLS

As for mildness, it goes somewhere in the middle. It’s often confused with sodium lauryl sulfate (SLS), but they are absolutely not the same. The SLES molecule has a bigger water-soluble head part that makes it milder and much less irritating. It is considered absolutely ok in the amount used in cosmetic products, though if you are looking for a mild facial cleanser, you have better chances with a formula without SLES. For an average shower gel? SLES works just fine.  

Also-called: Zemea | What-it-does: solvent, moisturizer/humectant

Propanediol is a natural alternative for the often used and often bad-mouthed propylene glycol. It's produced sustainably from corn sugar and it's Ecocert approved. 

It's quite a multi-tasker: can be used to improve skin moisturization, as a solvent, to boost preservative efficacy or to influence the sensory properties of the end formula. 

What-it-does: surfactant/cleansing

Super common ingredient in all kinds of cleansing products: face and body washes, shampoos and foam baths. 

Number one reason for its popularity has to do with bubbles. Everyone loves bubbles. And cocamidopropyl betaine is great at stabilizing them. 

Salicylic Acid - superstar
Also-called: BHA | What-it-does: exfoliant, anti-acne, soothing, preservative
  • It's one of the gold standard ingredients for treating problem skin
  • It can exfoliate skin both on the surface and in the pores
  • It's a potent anti-inflammatory agent
  • It's more effective for treating blackheads than acne
  • For acne combine it with antibacterial agents like benzoyl peroxide or azelaic acid
Read all the geeky details about Salicylic Acid here >>

What-it-does: chelating, buffering

A little helper ingredient that is used to adjust the pH of the product. It also helps to keep products stay nice longer by neutralizing the metal ions in the formula (they usually come from water). 

What-it-does: emulsifying | Irritancy: 0 | Comedogenicity: 0

We don't have description for this ingredient yet.

What-it-does: preservative

We don't have description for this ingredient yet.

What-it-does: buffering

Citric acid comes from citrus fruits and is an AHA. If these magic three letters don’t tell you anything, click here and read our detailed description on glycolic acid, the most famous AHA. 

So citric acid is an exfoliant, that can - just like other AHAs - gently lift off the dead skin cells of your skin and make it more smooth and fresh. 

Also-called: Salt | What-it-does: viscosity controlling

Sodium chloride is the fancy name of salt. Normal, everyday table salt

If (similar to us) you are in the weird habit of reading the label on your shower gel while taking a shower, you might have noticed that sodium chloride is almost always on the ingredient list. The reason for this is that salt acts as a fantastic thickener in cleansing formulas created with ionic cleansing agents (aka surfactants) such as Sodium Laureth Sulfate. A couple of percents (typically 1-3%) turns a runny surfactant solution into a nice gel texture.

Beta-Glucan - goodie

Beta-Glucan is a nice big molecule composed of many smaller sugar molecules (called polysaccharide). It’s in the cell walls of yeast, some mushrooms, seaweeds, and cereals.

It’s a real goodie no matter if you eat it or put it on your face. Eating it is anti-diabetic, anti-cancer, and even lowers blood cholesterol. 

It's a little helper ingredient coming from corn, rice or potato starch that can help to keep skin mat (absorbent), to stabilise emulsions, and to keep the product together (binding). 

What-it-does: buffering

We don't have description for this ingredient yet.

Gluconolactone - superstar
What-it-does: exfoliant, chelating
  • It’s a polyhydroxy acid (PHA), that is often referred to as next generation AHA
  • It gently lifts off dead skin cells form the skin surface making skin smooth and even
  • In the long term it provides anti-aging benefits, like increased skin thickness and decreased wrinkles (though a tad less than even more proven superstar AHAs)
  • It’s a great moisturizer and even helps to repair impaired skin barrier
  • It’s antioxidant, and does not make your skin more sensitive to the sun
  • It can be used even if your skin is very sensitive, rosacea prone or if you are post cosmetic procedure
Read all the geeky details about Gluconolactone here >>

Tocopherol - goodie
Also-called: Vitamin E | What-it-does: antioxidant | Irritancy: 0-3 | Comedogenicity: 0-3
  • Primary fat-soluble antioxidant in our skin
  • Significant photoprotection against UVB rays
  • Vit C + Vit E work in synergy and provide great photoprotection
  • Has emollient properties
  • Easy to formulate, stable and relatively inexpensive
Read all the geeky details about Tocopherol here >>

What-it-does: preservative

It’s pretty much the current IT-preservative. It’s safe and gentle, but even more importantly, it’s not a feared-by-everyone-mostly-without-scientific-reason paraben.

It’s not something new: it was introduced around 1950 and today it can be used up to 1% worldwide. It can be found in nature - in green tea - but the version used in cosmetics is synthetic. 

What-it-does: preservative

A helper ingredient that helps to make the products stay nice longer, aka preservative. It works mainly against fungi. 

It’s pH dependent and works best at acidic pH levels (3-5). It’s not strong enough to be used in itself so it’s always combined with something else, often with potassium sorbate.

What-it-does: preservative

It's one of those things that help your cosmetics not to go wrong too soon, aka a preservative. It’s not a strong one and doesn’t really work against bacteria, but more against mold and yeast. To do that it has to break down to its active form, sorbic acid. For that to happen, there has to be water in the product and the right pH value (pH 3-4). 

But even if everything is right, it’s not enough on its own. If you see potassium sorbate you should see some other preservative next to it too.

You may also want to take a look at...

what‑it‑does solvent
Normal (well kind of - it's purified and deionized) water. Usually the main solvent in cosmetic products. [more]
what‑it‑does surfactant/cleansing | emulsifying
It’s probably the most common cleansing ingredient of all. It’s usually the Chief Bubble Officer responsible for big bubbles in cleansing products through the foam it creates is a bit airy and loose and not as dense and luxurious as the foam created by infamous SLS.  As for mildness, it goes somewhere in the middle. [more]
what‑it‑does solvent | moisturizer/humectant
A natural corn sugar derived glycol. It can be used to improve skin moisturization, as a solvent, to boost preservative efficacy or to influence the sensory properties of the end formula. [more]
what‑it‑does surfactant/cleansing
Super common ingredient in all kinds of cleansing products: face and body washes, shampoos and foam baths. Number one reason for its popularity has to do with bubbles. [more]
what‑it‑does exfoliant | anti-acne | soothing | preservative
One of the gold standard ingredients for treating problem skin. It can exfoliate skin both on the surface and in the pores and it's a potent anti-inflammatory agent. [more]
what‑it‑does chelating | buffering
A helper ingredient that is used to adjust the pH of the product. Also helps to keep products stay nice longer by neutralizing the metal ions in the formula. 
what‑it‑does emulsifying
irritancy, com. 0, 0
what‑it‑does preservative
what‑it‑does buffering
An AHA that comes from citrus fruits. It is usually used as a helper ingredient to adjust the pH of the formula. [more]
what‑it‑does viscosity controlling
Sodium chloride is the fancy name of salt. Normal, everyday table salt.  If (similar to us) you are in the weird habit of reading the label on your shower gel while taking a shower, you might have noticed that sodium chloride is almost always on the ingredient list. [more]
what‑it‑does soothing | moisturizer/humectant
A great skin soother and moisturizer, and it even shows promising anti-aging benefits. It‘s also shown to have wound healing properties and is a mild antioxidant. [more]
It's a little helper ingredient coming from corn, rice or potato starch that can help to keep skin mat (absorbent), to stabilise emulsions, and to keep the product together (binding). 
what‑it‑does buffering
what‑it‑does exfoliant | chelating
A next generation AHA, a so-called PHA that gently exfoliates skin without irritation. It also moisturizes and helps the skin barrier. It also has antioxidant properties. [more]
what‑it‑does antioxidant
irritancy, com. 0-3, 0-3
Pure Vitamin E. Great antioxidant that gives significant photoprotection against UVB rays. Works in synergy with Vitamin C. [more]
what‑it‑does preservative
Pretty much the current IT-preservative. It’s safe and gentle, and can be used up to 1% worldwide. [more]
what‑it‑does preservative
A preservative that works mainly against fungi. Has to be combined with other preservatives. [more]
what‑it‑does preservative
A not so strong preservative that doesn’t really work against bacteria, but more against mold and yeast. [more]