Follow us on our new Insta page »
Freeman Charcoal And Black Sugar Mud Mask

Charcoal And Black Sugar Mud Mask

This velvety, jet-black mud mask works like magic to moisturize, remineralize, and make skin sensationally soft! Skin-loving minerals collected from the Dead Sea have a natural nourishing effect that boosts smoothness and overall skin health. Activated Charcoal locks onto oils & toxins, then gently lifts them away without over-drying or disturbing skin. Black Sugar helps skin hold on to hydration, which helps smooth out roughness and fine lines. Perfect for normal to combination skin.
Uploaded by: cassidygxoxo on

Freeman Charcoal And Black Sugar Mud Mask
Ingredients explained

Also-called: Aqua;Water | What-it-does: solvent

Good old water, aka H2O. The most common skincare ingredient of all. You can usually find it right in the very first spot of the ingredient list, meaning it’s the biggest thing out of all the stuff that makes up the product. 

It’s mainly a solvent for ingredients that do not like to dissolve in oils but rather in water. 

Bentonite - goodie
Also-called: Type of clay | What-it-does: viscosity controlling, absorbent/mattifier, emulsion stabilising | Irritancy: 0 | Comedogenicity: 0

When it comes to oil-absorbing clay masks, bentonite will probably be one of the first ingredients on the INCI list. Technically bentonite clay is mostly montmorillonite + something else, and thanks to the something else bit, bentonite comes in different types and colors

The color depends on the mineral content of the clay: white bentonite is rich in boron and fluoride, yellow is rich in manganese and zinc, green is rich in copper, zinc, and manganese and the pink clay is rich in boron.

Kaolin - goodie
Also-called: Type of clay, China clay | What-it-does: colorant, absorbent/mattifier, abrasive/scrub | Irritancy: 0 | Comedogenicity: 0

Kaolin is a type of clay or to be precise, a naturally occurring hydrous aluminum silicate. When you hear clay, you probably think of a muddy greenish-black mess, but that one is bentonite, and this one is a fine, white powder. It is so white that it's also often used, in small amounts, as a helper ingredient to give opacity and whiteness to the cosmetic formulas.

As a clay, it's absorbent and can suck up excess sebum and gunk from your skin, but less so than the more aggressive bentonite. As it's less absorbent, it's also less drying and gentler on the skin, so it's ideal for dry and sensitive skin types.  

Glycerin - superstar
Also-called: Glycerol | What-it-does: skin-identical ingredient, moisturizer/humectant | Irritancy: 0 | Comedogenicity: 0
  • A natural moisturizer that’s also in our skin
  • A super common, safe, effective and cheap molecule used for more than 50 years
  • Not only a simple moisturizer but knows much more: keeps the skin lipids between our skin cells in a healthy (liquid crystal) state, protects against irritation, helps to restore barrier
  • Effective from as low as 3% with even more benefits for dry skin at higher concentrations up to 20-40%
  • High-glycerin moisturizers are awesome for treating severely dry skin
Read all the geeky details about Glycerin here >>

What-it-does: viscosity controlling, absorbent/mattifier | Irritancy: 0 | Comedogenicity: 0

A type of clay mineral that works as a nice helper ingredient to thicken and stabilize formulas. As a clay, it consists of platelets that have a negative charge on the surface (face) and a positive on the edge. So the face of one platelet attracts the edge of the other and this builds a so-called "house of card" structure meaning that Magnesium Aluminum Silicate (MAS) thickens up products and helps to suspend non-soluble particles such as color pigments or inorganic sunscreens (zinc oxide and titanium dioxide).

As the "house of card" structure takes some time to form but collapses quickly if the formula is stirred, products thickened with MAS can be thick in the jar but become easily spreadable upon application (called thixotropy). MAS also gives nice sensory properties, it is not tacky or sticky and gives a rich, creamy skin feel. Also a good team player and works in synergy with other thickeners such as Cellulose Gum or Xanthan Gum

We don't have description for this ingredient yet.

We don't have description for this ingredient yet.

Sucrose - goodie

A type fo sugar, usually refined from cane or beet sugar. On the skin, it has water-binding properties and helps to keep your skin hydrated

Also-called: Ginger Root Extract | What-it-does: antioxidant, soothing

The extract coming from ginger, the lovely spice that we all know from the kitchen. It is also a medicinal plant used both in Chinese and Ayurvedic medicine for pretty much everything you can imagine (muscular pain, sore throat, nausea, fever or cramps,  just to give a few examples).

As for ginger and skincare, the root extract contains the biologically active component called gingerol that has potent antioxidant and anti-inflammatory properties. Combined with Bisabololthe duo works synergistically to sooth the skin and take down redness. 

What-it-does: preservative

An antimicrobial preservative that helps your products not to go wrong too quickly. It works especially well against bacteria, specifically gram-negative species, yeast, and mold.

Somewhat controversial, it belongs to an infamous family of formaldehyde-releasers. That is, it slowly breaks down to form formaldehyde when it is added to a formula. We have written more about formaldehyde-releasing preservatives and the concerns around them at Dmdm Hydantoin, but do not get too scared, those are more theories than proven facts.

Also-called: Papaya Fruit Extract

We don't have description for this ingredient yet.

A superabsorbent polymer (big molecule from repeated subunits) that has crazy water binding abilities. Sometimes its referred to as "waterlock" and can absorb 100 to 1000 times its mass in water. 

As for its use in cosmetic products, it is a handy multi-tasker that thickens up water-based formulas and also has some emulsifying and emulsion stabilizing properties. 

It's one of the most commonly used thickeners and emulsion stabilizers. If the product is too runny, a little xanthan gum will make it more gel-like. Used alone, it can make the formula sticky and it is a good team player so it is usually combined with other thickeners and so-called rheology modifiers (helper ingredients that adjust the flow and thus the feel of the formula). The typical use level of Xantha Gum is below 1%, it is usually in the 0.1-0.5% range. 

Btw, Xanthan gum is all natural, a chain of sugar molecules (polysaccharide) produced from individual sugar molecules (glucose and sucrose) via fermentation. It’s approved by Ecocert and also used in the food industry (E415). 

What-it-does: chelating

Super common little helper ingredient that helps products to remain nice and stable for a longer time. It does so by neutralizing the metal ions in the formula (that usually get into there from water) that would otherwise cause some not so nice changes.

It is typically used in tiny amounts, around 0.1% or less.

What-it-does: preservative

This totally unpronounceable ingredient (let’s take a shortcut: MCI) is a super effective preservative with both antibacterial and antifungal effects that works at very low concentrations. 

The bad news with it though is that it can sensitize the skin easily (it’s a so-called non-fragrance allergen). It’s not permitted to be used alone, but only with its BFF, methylisothiazolinone (MI), another icky preservative. Together they have a broad spectrum antimicrobial effect but are permitted to be used only in rinse-off products (under 0.0015%).

What-it-does: astringent

We don't have description for this ingredient yet.

What-it-does: preservative

As you may guess, if something is only recommended in products that you rinse off (cleansers and shampoos), then it’s probably not the best ingredient for the skin.

Methylisothiazolinone (MI) is a preservative that' super efficient against bacteria at surprisingly low concentrations. The problem with it though is that it can also sensitize and irritate the skin quite easily when it comes in leave-on formulas.

What-it-does: moisturizer/humectant, solvent, viscosity controlling | Irritancy: 0 | Comedogenicity: 0
  • It's a helper ingredient that improves the freeze-thaw stability of products
  • It's also a solvent, humectant and to some extent a penetration enhancer
  • It has a bad reputation among natural cosmetics advocates but cosmetic scientists and toxicology experts do not agree (read more in the geeky details section)
Read all the geeky details about Propylene Glycol here >>

We don't have description for this ingredient yet.

This ingredient name is not according to the INCI-standard. :( What, why?!

What-it-does: astringent

We don't have description for this ingredient yet.

Also-called: Lemongrass Extract | What-it-does: soothing

We don't have description for this ingredient yet.

We don't have description for this ingredient yet.

We don't have description for this ingredient yet.

Also-called: Kelp Extract

We don't have description for this ingredient yet.

Also-called: Watercress Extract | What-it-does: perfuming

We don't have description for this ingredient yet.

We don't have description for this ingredient yet.

Also-called: Fragrance, Parfum;Parfum/Fragrance | What-it-does: perfuming

Exactly what it sounds: nice smelling stuff put into cosmetic products so that the end product also smells nice. Fragrance in the US and parfum in the EU is a generic term on the ingredient list that is made up of 30 to 50 chemicals on average (but it can have as much as 200 components!). 

If you are someone who likes to know what you put on your face then fragrance is not your best friend - there's no way to know what’s really in it.  

Also-called: Iron Oxide Red;Ci 77491 | What-it-does: colorant | Irritancy: 0 | Comedogenicity: 0

Red Iron Oxide is the super common pigment that gives the familiar, "rust" red color. It is also the one that gives the pink tones in your foundation. Chemically speaking, it is iron III oxide (Fe2O3). 

We don't have description for this ingredient yet.

You may also want to take a look at...

what‑it‑does solvent
Normal (well kind of - it's purified and deionized) water. Usually the main solvent in cosmetic products. [more]
what‑it‑does viscosity controlling
irritancy, com. 0, 0
A highly absorbent clay that comes in different colors depending on its mineral content. It's excellent at absorbing things including sebum and gunk in the pores and it also has some skin soothing and "detoxifying" effect. [more]
what‑it‑does colorant | abrasive/scrub
irritancy, com. 0, 0
A type of clay that's a fine, white powder and is used for its oil-absorbing and opacifying properties. It's less absorbent and less drying than bentonite clay. [more]
what‑it‑does skin-identical ingredient | moisturizer/humectant
irritancy, com. 0, 0
A real oldie but a goodie. Great natural moisturizer and skin-identical ingredient that plays an important role in skin hydration and general skin health. [more]
what‑it‑does viscosity controlling
irritancy, com. 0, 0
A type of clay mineral that works as a nice helper ingredient to thicken and stabilize formulas. As a clay, it consists of platelets that have a negative charge on the surface (face) and a positive on the edge. [more]
what‑it‑does moisturizer/humectant | soothing
A type fo sugar, usually refined from cane or beet sugar. On the skin, it is water-binding properties and helps to keep your skin hydrated.
what‑it‑does antioxidant | soothing
Ginger extract that has antioxidant and soothing properties. It is also known to increase blood circulation and thus have a toning effect. [more]
what‑it‑does preservative
An antimicrobial preservative that helps your products not to go wrong too quickly. It works especially well against bacteria, specifically gram-negative species, yeast, and mold.Somewhat controversial, it belongs to an infamous family of formaldehyde-releasers. [more]
what‑it‑does viscosity controlling
A big polymer (a molecule from repeated subunits) with crazy water binding abilities. Used as a thickening and emulsion stabilizing agent. [more]
what‑it‑does viscosity controlling
A super commonly used thickener and emulsion stabilizer. [more]
what‑it‑does chelating
Super common little helper ingredient that helps products to remain nice and stable for a longer time. It does so by neutralizing the metal ions in the formula (that usually get into there from water) that would otherwise cause some not so nice changes. [more]
what‑it‑does preservative
Preservative with relatively high irritation risk. It's always used together with Methylisothiazolinone. [more]
what‑it‑does preservative
Preservative with relatively high irritation risk that is used mainly in rinse-off products. [more]
what‑it‑does moisturizer/humectant | solvent | viscosity controlling
irritancy, com. 0, 0
A common glycol that improves the freeze-thaw stability of products. It's also a solvent, humectant and to some extent a penetration enhancer. [more]
what‑it‑does soothing
what‑it‑does surfactant/cleansing | soothing
what‑it‑does perfuming
what‑it‑does perfuming
The generic term for nice smelling stuff put into cosmetic products so that the end product also smells nice. It is made up of 30 to 50 chemicals on average. [more]
what‑it‑does colorant
irritancy, com. 0, 0
Iron Oxide - a super common colorant with the color red.  [more]
what‑it‑does abrasive/scrub