Follow us on our new Insta page »
Biore Charcoal Pore Minimizer

Charcoal Pore Minimizer

Infused with natural charcoal and micro-crystals (that’s fancy for exfoliants), this innovative polisher cleans pores by drawing out oil and washing dirt away. To use: Just add H2O + rub.
Uploaded by: marsvc on

Biore Charcoal Pore Minimizer
Ingredients explained

Also-called: Aqua | What-it-does: solvent

Good old water, aka H2O. The most common skincare ingredient of all. You can usually find it right in the very first spot of the ingredient list, meaning it’s the biggest thing out of all the stuff that makes up the product. 

It’s mainly a solvent for ingredients that do not like to dissolve in oils but rather in water. 

Also-called: Aluminum Oxide, Al2O3 | What-it-does: viscosity controlling, absorbent/mattifier, abrasive/scrub

A multi-functional helper ingredient that's used mainly as a pigment carrier.  The pigment can be an inorganic sunscreen (such as titanium dioxide) or a colorant that is blended with alumina platelets and then often coated with some kind of silicone (such as triethoxycaprylylsilane). This special treatment enables pigments to be evenly dispersed in the formula and to be spread out easily and evenly upon application. It is super useful both for mineral sunscreens as well as for makeup products. 

Other than that, alumina can also be used as an absorbent (sometimes combined with the mattifying powder called polymethylsilsesquioxane), a viscosity controlling or an opacifying (reduces the transparency of the formula) agent.

Also-called: SLES | What-it-does: surfactant/cleansing, emulsifying

It’s probably the most common cleansing ingredient of all. It’s usually the Chief Bubble Officer responsible for big bubbles in cleansing products through the foam it creates is a bit airy and loose and not as dense and luxurious as the foam created by infamous SLS

As for mildness, it goes somewhere in the middle. It’s often confused with sodium lauryl sulfate (SLS), but they are absolutely not the same. The SLES molecule has a bigger water-soluble head part that makes it milder and much less irritating. It is considered absolutely ok in the amount used in cosmetic products, though if you are looking for a mild facial cleanser, you have better chances with a formula without SLES. For an average shower gel? SLES works just fine.  

What-it-does: surfactant/cleansing

Super common ingredient in all kinds of cleansing products: face and body washes, shampoos and foam baths. 

Number one reason for its popularity has to do with bubbles. Everyone loves bubbles. And cocamidopropyl betaine is great at stabilizing them. 

What-it-does: moisturizer/humectant | Irritancy: 0 | Comedogenicity: 0

It's a sweet tasting sugar substitute that helps your skin to hold onto water when used in cosmetic products. It also helps to thicken up products and give them a bit more slip. 

Glycerin - superstar
Also-called: Glycerol | What-it-does: skin-identical ingredient, moisturizer/humectant | Irritancy: 0 | Comedogenicity: 0
  • A natural moisturizer that’s also in our skin
  • A super common, safe, effective and cheap molecule used for more than 50 years
  • Not only a simple moisturizer but knows much more: keeps the skin lipids between our skin cells in a healthy (liquid crystal) state, protects against irritation, helps to restore barrier
  • Effective from as low as 3% with even more benefits for dry skin at higher concentrations up to 20-40%
  • High-glycerin moisturizers are awesome for treating severely dry skin
Read all the geeky details about Glycerin here >>

What-it-does: emulsifying

We don't have description for this ingredient yet.

What-it-does: preservative, deodorant

If you have spotted ethylhexylglycerin on the ingredient list, most probably you will see there also the current IT-preservative, phenoxyethanol. They are good friends because ethylhexylglycerin can boost the effectiveness of phenoxyethanol (and other preservatives) and as an added bonus it feels nice on the skin too.

Also, it's an effective deodorant and a medium spreading emollient

Though its long name does not reveal it, this polymer molecule (big molecule from repeated subunits or monomers) is a relative to the super common, water-loving thickener, Carbomer. Both of them are big molecules that contain acrylic acid units, but Acrylates/C10-30 Alkyl Acrylate Crosspolymer also contains some other monomers that are hydrophobic, i.e. water-hating. 

This means that our molecule is part water- and part oil-loving, so it not only works as a thickener but also as an emulsion stabilizer. It is very common in gel-type formulas that also contain an oil-phase as well as in cleansers as it also works with most cleansing agents (unlike a lot of other thickeners). 

It's one of the most commonly used thickeners and emulsion stabilizers. If the product is too runny, a little xanthan gum will make it more gel-like. Used alone, it can make the formula sticky and it is a good team player so it is usually combined with other thickeners and so-called rheology modifiers (helper ingredients that adjust the flow and thus the feel of the formula). The typical use level of Xantha Gum is below 1%, it is usually in the 0.1-0.5% range. 

Btw, Xanthan gum is all natural, a chain of sugar molecules (polysaccharide) produced from individual sugar molecules (glucose and sucrose) via fermentation. It’s approved by Ecocert and also used in the food industry (E415). 

What-it-does: preservative | Irritancy: 0 | Comedogenicity: 0

The most common type of feared-by-everyone-mostly-without-scientific-reason parabens. It's a cheap, effective and well-tolerated ingredient to make sure the cosmetic formula does not go wrong too soon

Apart from the general controversy around parabens (we wrote about it more here), there is a 2006 in-vitro (made in the lab not on real people) research about methylparaben (MP) showing that when exposed to sunlight, MP treated skin cells suffered more harm than non-MP treated skin cells. The study was not done with real people on real skin but still - using a good sunscreen next to MP containing products is a good idea. (Well, in fact using a sunscreen is always a good idea. :))

Fragrance - icky
Also-called: Fragrance, Parfum;Parfum/Fragrance | What-it-does: perfuming

Exactly what it sounds: nice smelling stuff put into cosmetic products so that the end product also smells nice. Fragrance in the US and parfum in the EU is a generic term on the ingredient list that is made up of 30 to 50 chemicals on average (but it can have as much as 200 components!). 

If you are someone who likes to know what you put on your face then fragrance is not your best friend - there's no way to know what’s really in it.  

Also-called: lye | What-it-does: buffering

The unfancy name for it is lye. It’s a solid white stuff that’s very alkaline and used in small amounts to adjust the pH of the product and make it just right. 

For example, in case of AHA or BHA exfoliants, the right pH is super-duper important, and pH adjusters like sodium hydroxide are needed.  

We don't have description for this ingredient yet.

What-it-does: preservative

A very common type of feared-by-everyone-mostly-without-scientific-reason paraben. It's a cheap, effective and well-tolerated ingredient to make sure the cosmetic formula does not go wrong too soon. Read more about parabens here >>

What-it-does: chelating

Super common little helper ingredient that helps products to remain nice and stable for a longer time. It does so by neutralizing the metal ions in the formula (that usually get into there from water) that would otherwise cause some not so nice changes.

It is typically used in tiny amounts, around 0.1% or less.

We don't have description for this ingredient yet.

Also-called: Sulisobenzone | What-it-does: sunscreen

A water-soluble, chemical sunscreen agent that is a secondary UVB absorber with some activity in the short UVA range as well. Being a secondary UV absorber means that its protection is weak and it has to be combined with other sunscreen filters for proper sun protection. 

More often than not, Benzophenone-4 is not used as a sunscreen agent but as a photoprotectant to extend product shelf life, or as a color-protectant for products in clear packages. 

What-it-does: preservative

As you may guess, if something is only recommended in products that you rinse off (cleansers and shampoos), then it’s probably not the best ingredient for the skin.

Methylisothiazolinone (MI) is a preservative that' super efficient against bacteria at surprisingly low concentrations. The problem with it though is that it can also sensitize and irritate the skin quite easily when it comes in leave-on formulas.

You may also want to take a look at...

what‑it‑does solvent
Normal (well kind of - it's purified and deionized) water. Usually the main solvent in cosmetic products. [more]
what‑it‑does viscosity controlling | abrasive/scrub
A multi-functional helper ingredient that's used mainly as a pigment carrier helping pigments in mineral sunscreens and color cosmetics to flow freely and evenly and not to clump. [more]
what‑it‑does surfactant/cleansing | emulsifying
It’s probably the most common cleansing ingredient of all. It’s usually the Chief Bubble Officer responsible for big bubbles in cleansing products through the foam it creates is a bit airy and loose and not as dense and luxurious as the foam created by infamous SLS.  As for mildness, it goes somewhere in the middle. [more]
what‑it‑does surfactant/cleansing
Super common ingredient in all kinds of cleansing products: face and body washes, shampoos and foam baths. Number one reason for its popularity has to do with bubbles. [more]
what‑it‑does moisturizer/humectant
irritancy, com. 0, 0
It's a sweet tasting sugar substitute that helps your skin to hold onto water when used in cosmetic products. It also helps to thicken up products and give them a bit more slip.  [more]
what‑it‑does skin-identical ingredient | moisturizer/humectant
irritancy, com. 0, 0
A real oldie but a goodie. Great natural moisturizer and skin-identical ingredient that plays an important role in skin hydration and general skin health. [more]
what‑it‑does emulsifying
what‑it‑does preservative
It can boost the effectiveness of phenoxyethanol (and other preservatives) and as an added bonus it feels nice on the skin too. [more]
what‑it‑does viscosity controlling
A common helper ingredient that stabilizes emulsions and helps to thicken up products. [more]
what‑it‑does viscosity controlling
A super commonly used thickener and emulsion stabilizer. [more]
what‑it‑does preservative
irritancy, com. 0, 0
The most common type of feared-by-everyone-mostly-without-scientific-reason parabens. It's a cheap, effective and well-tolerated ingredient to make sure the cosmetic formula does not go wrong too soon.  Apart from the general controversy around parabens (we wrote about it more here), there is a 2006 in-vitro (made in the lab not on real people) research about methylparaben (MP) sho [more]
what‑it‑does perfuming
The generic term for nice smelling stuff put into cosmetic products so that the end product also smells nice. It is made up of 30 to 50 chemicals on average. [more]
what‑it‑does buffering
Lye - A solid white stuff that’s very alkaline and used in small amount to adjust the pH of the product.  [more]
what‑it‑does preservative
A very common type of feared-by-everyone-mostly-without-scientific-reason paraben. It's a cheap, effective and well-tolerated ingredient to make sure the cosmetic formula does not go wrong too soon. [more]
what‑it‑does chelating
Super common little helper ingredient that helps products to remain nice and stable for a longer time. It does so by neutralizing the metal ions in the formula (that usually get into there from water) that would otherwise cause some not so nice changes. [more]
what‑it‑does abrasive/scrub
what‑it‑does sunscreen
A water-soluble, chemical sunscreen agent that is a secondary UVB absorber with some activity in the short UVA range as well. Being a secondary UV absorber means that its protection is weak and it has to be combined with other sunscreen filters for proper sun protection. More often than not, Benzophenone-4 is not used as a sunscreen agent but as a photoprotectant to extend product&nb [more]
what‑it‑does preservative
Preservative with relatively high irritation risk that is used mainly in rinse-off products. [more]