Follow us on our new Insta page »
Glytone Rejuvenating Mask

Rejuvenating Mask

This rejuvenating mask does it all! Packed with skin-enhancing ingredients like Collagen, 3.0 PFAV™ Glycolic Acid and Vitamin C to hydrate, plump, brighten and revitalize in just 10 minutes. The perfect boost to any at-home regimen.
Uploaded by: whishaw on

Glytone Rejuvenating Mask
Ingredients explained

Lactic Acid - superstar
  • It’s the second most researched AHA after glycolic acid
  • It gently lifts off dead skin cells to reveal newer, fresher, smoother skin
  • It also has amazing skin hydrating properties
  • In higher concentration (10% and up) it improves skin firmness, thickness and wrinkles
  • Choose a product where you know the concentration and pH value because these two greatly influence effectiveness
  • Don’t forget to use your sunscreen (in any case but especially so next to an AHA product)
Read all the geeky details about Lactic Acid here >>

Ascorbic Acid - superstar
Also-called: Vitamin C, L-ascorbic acid | What-it-does: antioxidant, skin brightening, buffering
  • Works best between a concentration of 5-20%
  • Boosts the skin’s own collagen production
  • Fades pigmentation and brown spots
  • If used under sunscreen it boosts its UV protection
  • Extremely unstable and oxidizes very easily in presence of light or air
  • Stable in solutions with water only if pH is less than 3.5 or in waterless formulations
  • Vit E + C work in synergy and provide superb photoprotection
  • Ferulic acid doubles the photoprotection effect of Vit C+E and helps to stabilize Vit C
  • Potent Vit. C serums might cause a slight tingling on sensitive skin
Read all the geeky details about Ascorbic Acid here >>

Glycolic Acid - superstar
What-it-does: exfoliant, buffering
  • It’s the most researched AHA with the most proven skin benefits
  • It gently lifts off dead skin cells to reveal newer, fresher, smoother skin
  • It can help skin’s own collagen production that results in firmer, younger skin
  • It can fade brown spots caused by sun damage or PIH
  • Choose a product where you know the concentration and pH value because these two greatly influence effectiveness
  • Don’t forget to use your sunscreen (in any case but especially so next to an AHA product)
  • Slight stinging or burning with a stronger AHA product is normal
  • If your skin is very sensitive, rosacea prone choose rather a BHA or PHA product
Read all the geeky details about Glycolic Acid here >>

Additional Ingredients:
Also-called: Aqua | What-it-does: solvent

Good old water, aka H2O. The most common skincare ingredient of all. You can usually find it right in the very first spot of the ingredient list, meaning it’s the biggest thing out of all the stuff that makes up the product. 

It’s mainly a solvent for ingredients that do not like to dissolve in oils but rather in water. 

Expand to read more

Once inside the skin, it hydrates, but not from the outside - putting pure water on the skin (hello long baths!) is drying. 

One more thing: the water used in cosmetics is purified and deionized (it means that almost all of the mineral ions inside it is removed). Like this, the products can stay more stable over time. 

Zinc Oxide - goodie
What-it-does: sunscreen, colorant | Irritancy: 0 | Comedogenicity: 1

When it comes to sunscreen agents, Zinc Oxide is pretty much in a league of its own. It's a physical (or inorganic) sunscreen that has a lot in common with fellow inorganic sunscreen Titanium Dioxide (TiO2) but a couple of things make it superior even to TiO2.

If physical sunscreens don't tell you anything, go ahead and read about the basics here. Most of what we wrote about Titanium Dioxide is also true for Zinc Oxide so we will focus here on the differences. 

Expand to read more

The first main difference is that while TiO2 gives a nice broad spectrum protection, Zinc Oxide has an even nicer and even broader spectrum protection. It protects against UVB, UVA II, and UVA I almost uniformly, and is considered to be the broadest range sunscreen available today

It's also highly stable and non-irritating. So much so that Zinc Oxide also counts as a skin protectant and anti-irritant. It's also often used to treat skin irritations such as diaper rash.

As for the disadvantages, Zinc Oxide is also not cosmetically elegant. It leaves a disturbing whitish tint on the skin, although, according to a 2000 research paper by Dr. Pinnell, it's slightly less white than TiO2. Still, it's white and disturbing enough to use Zinc Oxide nanoparticles more and more often. 

We wrote more about nanoparticles and the concerns around them here, but the gist is that if nanoparticles were absorbed into the skin that would be a reason for legitimate health concerns. But luckily, so far research shows that sunscreen nanoparticles are not absorbed but remain on the surface of the skin or in the uppermost (dead) layer of the skin. This seems to be true even if the skin is damaged, for example, sunburnt. 

All in all, if you've found a Zinc Oxide sunscreen that you are happy to use every single day, that's fantastic and we suggest you stick with it. It's definitely one of the best, or probably even the best option out there for sun protection available worldwide. 

Kaolin - goodie
Also-called: Type of clay, China clay | What-it-does: colorant, absorbent/mattifier, abrasive/scrub | Irritancy: 0 | Comedogenicity: 0

Kaolin is a type of clay or to be precise, a naturally occurring hydrous aluminum silicate. When you hear clay, you probably think of a muddy greenish-black mess, but that one is bentonite, and this one is a fine, white powder. It is so white that it's also often used, in small amounts, as a helper ingredient to give opacity and whiteness to the cosmetic formulas.

As a clay, it's absorbent and can suck up excess sebum and gunk from your skin, but less so than the more aggressive bentonite. As it's less absorbent, it's also less drying and gentler on the skin, so it's ideal for dry and sensitive skin types.  

Bentonite - goodie
Also-called: Type of clay | What-it-does: viscosity controlling, absorbent/mattifier, emulsion stabilising | Irritancy: 0 | Comedogenicity: 0

When it comes to oil-absorbing clay masks, bentonite will probably be one of the first ingredients on the INCI list. Technically bentonite clay is mostly montmorillonite + something else, and thanks to the something else bit, bentonite comes in different types and colors

The color depends on the mineral content of the clay: white bentonite is rich in boron and fluoride, yellow is rich in manganese and zinc, green is rich in copper, zinc, and manganese and the pink clay is rich in boron.

Expand to read more

No matter the color, bentonite is excellent at absorbing things: it can suck up the sebum and gunk from the skin and make it instantly smooth and matte. Not only that, but bentonite has a negative ionic charge and thus can attract things with a positive charge. Things with a positive charge include bad bacteria and toxins and bentonite clay masks can help to clear those out of the skin and pores (btw, bentonite is edible and has the same detoxifying effect internally). 

Thanks to bentonite's effect against bad bacteria and pathogens, there is also some research showing that bentonite can help to calm skin infections, soothe skin allergies and might work for skin conditions like psoriasis and eczema.

On the other hand, the downside of bentonite being such a good absorbent is that it can suck up more than the excess sebum and used too often, it can easily dry out the skin. So use it for good measure, and never forget to moisturize afterwards.

What-it-does: solvent, viscosity controlling, perfuming | Irritancy: 0 | Comedogenicity: 0

We don't have description for this ingredient yet.

Glycerin - superstar
Also-called: Glycerol | What-it-does: skin-identical ingredient, moisturizer/humectant | Irritancy: 0 | Comedogenicity: 0
  • A natural moisturizer that’s also in our skin
  • A super common, safe, effective and cheap molecule used for more than 50 years
  • Not only a simple moisturizer but knows much more: keeps the skin lipids between our skin cells in a healthy (liquid crystal) state, protects against irritation, helps to restore barrier
  • Effective from as low as 3% with even more benefits at higher concentrations up to 20-40% (around 10% is a good usability-effectiveness sweet spot)
  • High-glycerin moisturizers are awesome for treating severely dry skin
Read all the geeky details about Glycerin here >>

Also-called: Butylated Hydroxy Toluene | What-it-does: antioxidant, preservative

It's the acronym for Butylated Hydroxy Toluene. It's a common synthetic antioxidant that's used as a preservative.

There is some controversy around BHT. It's not a new ingredient, it has been used both as a food and cosmetics additive since the 1970s. Plenty of studies tried to examine if it's a carcinogen or not. This Truth in Aging article details the situation and also writes that all these studies examine BHT when taken orally.

Expand to read more

As for cosmetics, the CIR (Cosmetic Ingredient Review) concluded that the amount of BHT used in cosmetic products is low (usually around 0.01-0.1%),  it does not penetrate skin far enough to be absorbed into the bloodstream and it is safe to use in cosmetics.

Super common little helper ingredient that helps products to remain nice and stable for a longer time. It does so by neutralizing the metal ions in the formula (that usually get into there from water) that would otherwise cause some not so nice changes.

Menthol - icky
What-it-does: soothing

Menthol needs no introduction: it's the thing that causes the cooling sensation so well-known both from cosmetic products as well as a bunch of other things like chocolate, chewing gum, toothpaste or cigarette. It's a natural compound that comes from the essential oil of Mentha species (peppermint oil contains 40-50% menthol) and it gives them their typical minty smell and flavor.

As for skincare, menthol seems to be a mixed bag. Apart from the cool cooling sensation (that might last up to 70 mins!), it also has painkilling, itch reducing, antibacterial, antifungal and even penetration enhancing properties. On the other hand, it also seems to act as a skin irritant that increases trans-epidermal water loss (the water that evaporates from the outer layer of the skin) and thus contributes to drying out the skin.

What-it-does: preservative | Irritancy: 0 | Comedogenicity: 0

The most common type of feared-by-everyone-mostly-without-scientific-reason parabens. It's a cheap, effective and well-tolerated ingredient to make sure the cosmetic formula does not go wrong too soon

Apart from the general controversy around parabens (we wrote about it more here), there is a 2006 in-vitro (made in the lab not on real people) research about methylparaben (MP) showing that when exposed to sunlight, MP treated skin cells suffered more harm than non-MP treated skin cells. The study was not done with real people on real skin but still - using a good sunscreen next to MP containing products is a good idea. (Well, in fact using a sunscreen is always a good idea. :))

What-it-does: antioxidant, perfuming

We don't have description for this ingredient yet.

Also-called: SLS | What-it-does: surfactant/cleansing, emulsifying | Comedogenicity: 0

The famous or rather infamous SLS (not to be confused with SLES). It is a cleansing agent known for being too good at the job and potentially irritating the skin. But, on the positive side,  it can produce copious, creamy and luxurious foam compared to the more gentle and thus nowadays much more commonly used Sodium Laureth Sulfate.

In fact, SLS is so good at irritating the skin that it is very commonly used in dermatological studies just for that. It is a so-called "primary irritant", a substance that irritates the skin in one go (without prior sensitization) but doesn't do any other big harm (such as being carcinogenic or systematically toxic - those claims are not true). Also, the formula can greatly influence the irritating potential of SLS, and mixing it with other cleaning agents makes it milder

Expand to read more

If it's not in a cleanser, it works as an emulsifier or even as a penetration enhancer for active materials. 

What-it-does: moisturizer/humectant

Soluble Collagen refers to the big, natural collagen molecules mostly extracted from fish or bovine skin. Spotting collagen on the ingredient list, you might think that, aha, this must be there to supplement the collagen content of our own skin, but you have to know that collagen is a huge-huge molecule that cannot absorb to the middle layer of the skin where collagen is and even if it could, it cannot just magically go the right places to become part of the skin's own collagen network. Putting collagen on your skin for anti-aging purposes is like throwing tent poles onto a ramshackle tent and expecting the tent to magically become nice and firm again. 

The strong point of collagen is being a large molecule with tremendous water binding capacity, i.e. an amazing humectant and moisturizer. It produces a water-rich film on the skin giving the stratum corneum (the uppermost layer of the skin) great hydration, making it nice and smooth and reducing trans-epidermal-water loss (the process of water evaporating out of your skin). 

Expand to read more

It is also so gentle and non-irritant that it can actually be used in cleansers to reduce the irritating potential of harsh surfactants, aka cleansing agents. 

If you are fine with animal-derived ingredients and know that collagen in a jar has nothing to do with wrinkles but everything to do with skin hydration, Soluble Collagen is a nice ingredient. 

 

You may also want to take a look at...

what‑it‑does exfoliant | moisturizer/humectant | buffering
A superstar AHA that not only exfoliates skin but is also a very good moisturizer. In higher concentration (10% and up) it can even improve skin firmness, thickness, and wrinkles. [more]
what‑it‑does antioxidant | skin brightening | buffering
Pure Vitamin C. A skincare superstar that is clinically proven to boost collagen production (in 5-20% concentration), fade hyperpigmentation and boost UV protection under sunscreen. Also, it's extremely unstable and hard to formulate. [more]
what‑it‑does exfoliant | buffering
The most researched and well-known AHA exfoliant. It gently lifts off dead skin cells to reveal newer, fresher, smoother skin. In larger concentration (>10%) it's a proven collagen booster. [more]
We don't have description for this ingredient yet.
what‑it‑does solvent
Normal (well kind of - it's purified and deionized) water. Usually the main solvent in cosmetic products. [more]
what‑it‑does sunscreen | colorant
irritancy, com. 0, 1
A physical/inorganic sunscreen with the broadest spectrum (UVB and UVA II, less good at UVA I) protection available today. It also has good stability and also works as a skin protectant, anti-irritant. Might leave some whitish tint on the skin, though. [more]
what‑it‑does colorant | abrasive/scrub
irritancy, com. 0, 0
A type of clay that's a fine, white powder and is used for its oil-absorbing and opacifying properties. It's less absorbent and less drying than bentonite clay. [more]
what‑it‑does viscosity controlling
irritancy, com. 0, 0
A highly absorbent clay that comes in different colors depending on its mineral content. It's excellent at absorbing things including sebum and gunk in the pores and it also has some skin soothing and "detoxifying" effect. [more]
what‑it‑does solvent | viscosity controlling | perfuming
irritancy, com. 0, 0
what‑it‑does skin-identical ingredient | moisturizer/humectant
irritancy, com. 0, 0
A real oldie but a goodie. Great natural moisturizer and skin-identical ingredient that plays an important role in skin hydration and general skin health. [more]
what‑it‑does antioxidant | preservative
It's the acronym for Butylated Hydroxy Toluene. It's a common synthetic antioxidant that's used as a preservative.There is some controversy around BHT. [more]
what‑it‑does chelating | viscosity controlling
Super common little helper ingredient that helps products to remain nice and stable for a longer time. It does so by neutralizing the metal ions in the formula (that usually get into there from water) that would otherwise cause some not so nice changes. [more]
what‑it‑does soothing
Menthol needs no introduction: it's the thing that causes the cooling sensation so well-known both from cosmetic products as well as a bunch of other things like chocolate, chewing gum, toothpaste or cigarette. It's a natural compound that comes from the essential oil of Mentha species (peppermint oil contains 40-50% menthol) and it gives them their typical minty smell a [more]
what‑it‑does preservative
irritancy, com. 0, 0
The most common type of feared-by-everyone-mostly-without-scientific-reason parabens. It's a cheap, effective and well-tolerated ingredient to make sure the cosmetic formula does not go wrong too soon.  Apart from the general controversy around parabens (we wrote about it more here), there is a 2006 in-vitro (made in the lab not on real people) research about methylparaben (MP) sho [more]
what‑it‑does antioxidant | perfuming
what‑it‑does surfactant/cleansing | emulsifying
com. 0
The famous or rather infamous SLS (not to be confused with SLES). It is a cleansing agent known for being too good at the job and potentially irritating the skin. [more]
what‑it‑does moisturizer/humectant
Soluble Collagen refers to the big, natural collagen molecules mostly extracted from fish or bovine skin. Spotting collagen on the ingredient list, you might think that, aha, this must be there to supplement the collagen content of our own skin, but you have to know that collagen is a huge-huge molecule  [more]