Boots Botanics All Bright Soothing Eye Makeup Remover
Boots

Botanics All Bright Soothing Eye Makeup Remover

Eye makeup remover for all skin types
Uploaded by: spottymollusc on 23/05/2018

Ingredients overview

Aqua (Water)
what‑it‑does solvent
Normal (well kind of - it's purified and deionized) water. Usually the main solvent in cosmetic products. [more]
,
Dimethicone
what‑it‑does emollient
irritancy, com. 0 1
A very common silicone that gives both skin and hair a silky smooth feel. It also forms a protective barrier on the skin and fills in fine lines. Also used for scar treatment. [more]
,
Isononyl Isononanoate
what‑it‑does emollient
An emollient ester with a rich and creamy but non-greasy skin feel. [more]
,
Caprylic/​Capric Triglyceride
what‑it‑does emollient
A very common emollient that makes your skin feel nice and smooth. Comes from coconut oil and glycerin, it’s light-textured, clear, odorless and non-greasy. [more]
,
Butylene Glycol
what‑it‑does moisturizer/humectant | solvent
irritancy, com. 0 1
An often used glycol that works as a solvent, humectant, penetration enhancer and also gives a good slip to the products. [more]
,
Phenoxyethanol
what‑it‑does preservative
Pretty much the current IT-preservative. It’s safe and gentle, and can be used up to 1% worldwide. [more]
,
Hibiscus Sabdariffa Flower Extract, Caprylyl Glycol
what‑it‑does moisturizer/humectant | emollient
A handy multi-tasking ingredient that gives the skin a nice, soft feel and also boosts the effectiveness of other preservatives. [more]
,
Sodium Chloride
what‑it‑does viscosity controlling
Sodium chloride is the fancy name of salt. Normal, everyday table salt. It’s a common little helper ingredient in cosmetics that helps to increase the volume of a product (bulking), to disguise any unpleasant smell (masking) or to thicken up a formula (viscosity controlling). [more]
, [more]
Sodium Benzoate
what‑it‑does preservative
A preservative that works mainly against fungi. Has to be combined with other preservatives. [more]
,
Ethylhexylglycerin
what‑it‑does preservative
It can boost the effectiveness of phenoxyethanol (and other preservatives) and as an added bonus it feels nice on the skin too. [more]
,
Tetrasodium Edta
what‑it‑does chelating
A helper ingredient that helps to neutralize the metal ions in the formula (that usually get into there from water) that would otherwise cause some not so nice changes.
,
Benzoic Acid
what‑it‑does preservative
An Ecocert-approved, natural preservative that counts as gentle and non-irritating to the skin. Usually, it comes to the formula as part of a preservative blend as it's not enough on its own.
,
Dehydroacetic Acid.
what‑it‑does preservative
A preservative that works mainly against fungi and has only milder effect against bacteria. Popular in natural products.  [more]
[less]

Highlights

Chelating: Tetrasodium Edta
what‑it‑does chelating
A helper ingredient that helps to neutralize the metal ions in the formula (that usually get into there from water) that would otherwise cause some not so nice changes.
Emollient: Dimethicone
what‑it‑does emollient
irritancy, com. 0 1
A very common silicone that gives both skin and hair a silky smooth feel. It also forms a protective barrier on the skin and fills in fine lines. Also used for scar treatment. [more]
,
Isononyl Isononanoate
what‑it‑does emollient
An emollient ester with a rich and creamy but non-greasy skin feel. [more]
,
Caprylic/​Capric Triglyceride
what‑it‑does emollient
A very common emollient that makes your skin feel nice and smooth. Comes from coconut oil and glycerin, it’s light-textured, clear, odorless and non-greasy. [more]
,
Caprylyl Glycol
what‑it‑does moisturizer/humectant | emollient
A handy multi-tasking ingredient that gives the skin a nice, soft feel and also boosts the effectiveness of other preservatives. [more]
Moisturizer/humectant: Butylene Glycol
what‑it‑does moisturizer/humectant | solvent
irritancy, com. 0 1
An often used glycol that works as a solvent, humectant, penetration enhancer and also gives a good slip to the products. [more]
,
Caprylyl Glycol
what‑it‑does moisturizer/humectant | emollient
A handy multi-tasking ingredient that gives the skin a nice, soft feel and also boosts the effectiveness of other preservatives. [more]
Preservative: Phenoxyethanol
what‑it‑does preservative
Pretty much the current IT-preservative. It’s safe and gentle, and can be used up to 1% worldwide. [more]
,
Sodium Benzoate
what‑it‑does preservative
A preservative that works mainly against fungi. Has to be combined with other preservatives. [more]
,
Ethylhexylglycerin
what‑it‑does preservative
It can boost the effectiveness of phenoxyethanol (and other preservatives) and as an added bonus it feels nice on the skin too. [more]
,
Benzoic Acid
what‑it‑does preservative
An Ecocert-approved, natural preservative that counts as gentle and non-irritating to the skin. Usually, it comes to the formula as part of a preservative blend as it's not enough on its own.
,
Dehydroacetic Acid.
what‑it‑does preservative
A preservative that works mainly against fungi and has only milder effect against bacteria. Popular in natural products.  [more]
Solvent: Aqua (Water)
what‑it‑does solvent
Normal (well kind of - it's purified and deionized) water. Usually the main solvent in cosmetic products. [more]
,
Butylene Glycol
what‑it‑does moisturizer/humectant | solvent
irritancy, com. 0 1
An often used glycol that works as a solvent, humectant, penetration enhancer and also gives a good slip to the products. [more]
Viscosity controlling: Sodium Chloride
what‑it‑does viscosity controlling
Sodium chloride is the fancy name of salt. Normal, everyday table salt. It’s a common little helper ingredient in cosmetics that helps to increase the volume of a product (bulking), to disguise any unpleasant smell (masking) or to thicken up a formula (viscosity controlling). [more]

Ingredients explained

Also-called: Aqua | What-it-does: solvent

Good old water, aka H2O. The most common skincare ingredient of all. You can usually find it right in the very first spot of the ingredient list, meaning it’s the biggest thing out of all the stuff that makes up the product. 

It’s mainly a solvent for ingredients that do not like to dissolve in oils but rather in water. 

Expand to read more

Once inside the skin, it hydrates, but not from the outside - putting pure water on the skin (hello long baths!) is drying. 

One more thing: the water used in cosmetics is purified and deionized (it means that almost all of the mineral ions inside it is removed). Like this, the products can stay more stable over time. 

What-it-does: emollient | Irritancy: 0 | Comedogenicity: 1

Probably the cheapest and most common silicone of all. It is a polymer (created from repeating subunits) molecule and has different molecular weight and thus different viscosity versions from water-light to thick liquid.

As for skincare, it makes the skin silky smooth, creates a subtle gloss and forms a protective barrier. Also, works well to fill in fine lines and wrinkles and give skin a plump look (of course that is only temporary, but still, it's nice). There are also scar treatment gels out there using dimethicone as their base ingredient. It helps to soften scars and increase their elasticity. 

Expand to read more

As for hair care, it is a non-volatile silicone meaning that it stays on the hair rather than evaporates from it and smoothes the hair like no other thing. Depending on your hair type, it can be a bit difficult to wash out and might cause some build-up (btw, this is not true to all silicones, only the non-volatile types). 

What-it-does: emollient

An emollient ester with a rich and creamy but non-greasy skin feel. It makes skin supple and protects dry skin. 

What-it-does: emollient

A very common emollient that makes your skin feel nice and smooth. It comes from coconut oil and glycerin, it’s light-textured, clear, odorless and non-greasy. It’s a nice ingredient that just feels good on the skin, and it’s also easy to formulate with. No wonder it’s popular. 

What-it-does: moisturizer/humectant, solvent | Irritancy: 0 | Comedogenicity: 1

Butylene glycol, or let’s just call it BG, is a multi-tasking colorless, syrupy liquid. It’s a great pick for creating a nice feeling product.  

BG’s main job is usually to be a solvent for the other ingredients. Other tasks include helping the product to absorb faster and deeper into the skin (penetration enhancer), making the product spread nicely over the skin (slip agent), and attracting water (humectant) into the skin.

Expand to read more

It’s an ingredient whose safety hasn’t been questioned so far by anyone (at least not that we know about). BG is approved by Ecocert and is also used enthusiastically in natural products. BTW, it’s also a food additive. 

What-it-does: preservative

It’s pretty much the current IT-preservative. It’s safe and gentle, but even more importantly, it’s not a feared-by-everyone-mostly-without-scientific-reason paraben.

It’s not something new: it was introduced around 1950 and today it can be used up to 1% worldwide. It can be found in nature - in green tea - but the version used in cosmetics is synthetic. 

Expand to read more

Other than having a good safety profile and being quite gentle to the skin it has some other advantages too. It can be used in many types of formulations as it has great thermal stability (can be heated up to 85°C) and works on a wide range of pH levels (ph 3-10). 

It’s often used together with ethylhexylglycerin as it nicely improves the preservative activity of phenoxyethanol.

Also-called: Hibiscus Extract

We don't have description for this ingredient yet.

It’s a handy multi-tasking ingredient that gives the skin a nice, soft feel. At the same time, it also boosts the effectiveness of other preservatives, such as the nowadays super commonly used phenoxyethanol

The blend of these two (caprylyl glycol + phenoxyethanol) is called Optiphen, which not only helps to keep your cosmetics free from nasty things for a long time but also gives a good feel to the finished product. It's a popular duo.

Also-called: Salt | What-it-does: viscosity controlling

Sodium chloride is the fancy name of salt. Normal, everyday table salt

It’s a common little helper ingredient in cosmetics that helps to increase the volume of a product (bulking), to disguise any unpleasant smell (masking) or to thicken up a formula (viscosity controlling). Sometimes it’s also used as a scrub.

What-it-does: preservative

A helper ingredient that helps to make the products stay nice longer, aka preservative. It works mainly against fungi. 

It’s pH dependent and works best at acidic pH levels (3-5). It’s not strong enough to be used in itself so it’s always combined with something else, often with potassium sorbate.

What-it-does: preservative

If you have spotted ethylhexylglycerin on the ingredient list, most probably you will see there also the current IT-preservative, phenoxyethanol. They are good friends because ethylhexylglycerin can boost the effectiveness of phenoxyethanol (and other preservatives) and as an added bonus it feels nice on the skin too.

Also, it's an effective deodorant and a medium spreading emollient

What-it-does: chelating

A handy helper ingredient that helps products to remain nice and stable for a longer time. It does so by neutralizing the metal ions in the formula (that usually get into there from water) that would otherwise cause some not so nice changes.

What-it-does: preservative

An Ecocert-approved, natural preservative that counts as gentle and non-irritating to the skin. Usually, it comes to the formula as part of a preservative blend as it's not enough on its own.

Also-called: Geogard 111A | What-it-does: preservative

A helper ingredient that helps to make the products stay nice longer, aka preservative. It works mainly against fungi and has only milder effect against bacteria. 

It is Ecocert and Cosmos approved, works quite well at low concentrations (0.1-0.6%) and is popular in natural products.

You may also want to take a look at...