Follow us on our new Insta page »
La Roche-Posay Lipikar Oil Ap+

Lipikar Oil Ap+

Lipid-replenishing anti-itching cleansing oil. Protects the skin against the drying effects of hard water. Provides the skin with the lipids required for restoring the skin barrier.
Uploaded by: carly on

La Roche-Posay Lipikar Oil Ap+
Ingredients explained

Also-called: Aqua;Water | What-it-does: solvent

Good old water, aka H2O. The most common skincare ingredient of all. You can usually find it right in the very first spot of the ingredient list, meaning it’s the biggest thing out of all the stuff that makes up the product. 

It’s mainly a solvent for ingredients that do not like to dissolve in oils but rather in water. 

What-it-does: moisturizer/humectant | Irritancy: 0 | Comedogenicity: 0

It's a sweet tasting sugar substitute that helps your skin to hold onto water when used in cosmetic products. It also helps to thicken up products and give them a bit more slip. 

Also-called: SLES | What-it-does: surfactant/cleansing, emulsifying

It’s probably the most common cleansing ingredient of all. It’s usually the Chief Bubble Officer responsible for big bubbles in cleansing products through the foam it creates is a bit airy and loose and not as dense and luxurious as the foam created by infamous SLS

As for mildness, it goes somewhere in the middle. It’s often confused with sodium lauryl sulfate (SLS), but they are absolutely not the same. The SLES molecule has a bigger water-soluble head part that makes it milder and much less irritating. It is considered absolutely ok in the amount used in cosmetic products, though if you are looking for a mild facial cleanser, you have better chances with a formula without SLES. For an average shower gel? SLES works just fine.  

A castor oil derived, white, lard-like helper ingredient that is used as a solubilizer to put fragrances (those are oil loving things) into water-based products such as toners.

A clear, light yellow water-loving oil that comes from coconut/palm kernel oil and glycerin. It's a mild cleansing agent popular in baby washes and sensitive skin formulas.

It's also a so-called solubilizer that helps to dissolve oils and oil-soluble ingredients (e.g.essential oils or salicylic acid) in water-based formulas. 

A cleansing agent whose main thing is adding viscosity and foam to cleansing formulas

Chemically speaking, it is the little sister of Cocamide DEA and has similar properties to that guy. However, being a monoethanolamine instead of diethanolamine has the advantage that the nitrosamine-concern does not apply for Cocamide MEA.

We don't have description for this ingredient yet.

We don't have description for this ingredient yet.

What-it-does: buffering

Citric acid comes from citrus fruits and is an AHA. If these magic three letters don’t tell you anything, click here and read our detailed description on glycolic acid, the most famous AHA. 

So citric acid is an exfoliant, that can - just like other AHAs - gently lift off the dead skin cells of your skin and make it more smooth and fresh. 

We don't have description for this ingredient yet.

Niacinamide - superstar
Also-called: vitamin B3, nicotinamide | What-it-does: cell-communicating ingredient, skin brightening, anti-acne, moisturizer/humectant
  • A multi-functional skincare superstar with several proven benefits for the skin
  • Great anti-aging, wrinkle smoothing ingredient used at 4-5% concentration
  • Fades brown spots alone or in combination with amino sugar, acetyl glucosamine
  • Increases ceramide synthesis that results in a stronger, healthier skin barrier and better skin hydration
  • Can help to improve several skin conditions including acne, rosacea, and atopic dermatitis
Read all the geeky details about Niacinamide here >>

Also-called: Fragrance, Parfum | What-it-does: perfuming

Exactly what it sounds: nice smelling stuff put into cosmetic products so that the end product also smells nice. Fragrance in the US and parfum in the EU is a generic term on the ingredient list that is made up of 30 to 50 chemicals on average (but it can have as much as 200 components!). 

If you are someone who likes to know what you put on your face then fragrance is not your best friend - there's no way to know what’s really in it.  

We don't have description for this ingredient yet.

A helper ingredient that can solubilize challenging oils and oil-loving actives into cleansing products. It also has emollient, emulsifying, and wetting properties.

Salicylic Acid - superstar
Also-called: BHA | What-it-does: exfoliant, anti-acne, soothing, preservative
  • It's one of the gold standard ingredients for treating problem skin
  • It can exfoliate skin both on the surface and in the pores
  • It's a potent anti-inflammatory agent
  • It's more effective for treating blackheads than acne
  • For acne combine it with antibacterial agents like benzoyl peroxide or azelaic acid
Read all the geeky details about Salicylic Acid here >>

What-it-does: preservative

A helper ingredient that helps to make the products stay nice longer, aka preservative. It works mainly against fungi. 

It’s pH dependent and works best at acidic pH levels (3-5). It’s not strong enough to be used in itself so it’s always combined with something else, often with potassium sorbate.

Also-called: Salt | What-it-does: viscosity controlling

Sodium chloride is the fancy name of salt. Normal, everyday table salt

If (similar to us) you are in the weird habit of reading the label on your shower gel while taking a shower, you might have noticed that sodium chloride is almost always on the ingredient list. The reason for this is that salt acts as a fantastic thickener in cleansing formulas created with ionic cleansing agents (aka surfactants) such as Sodium Laureth Sulfate. A couple of percents (typically 1-3%) turns a runny surfactant solution into a nice gel texture.

Also-called: lye | What-it-does: buffering

The unfancy name for it is lye. It’s a solid white stuff that’s very alkaline and used in small amounts to adjust the pH of the product and make it just right. 

For example, in case of AHA or BHA exfoliants, the right pH is super-duper important, and pH adjusters like sodium hydroxide are needed.  

You may also want to take a look at...

what‑it‑does solvent
Normal (well kind of - it's purified and deionized) water. Usually the main solvent in cosmetic products. [more]
what‑it‑does moisturizer/humectant
irritancy, com. 0, 0
It's a sweet tasting sugar substitute that helps your skin to hold onto water when used in cosmetic products. It also helps to thicken up products and give them a bit more slip.  [more]
what‑it‑does surfactant/cleansing | emulsifying
It’s probably the most common cleansing ingredient of all. It’s usually the Chief Bubble Officer responsible for big bubbles in cleansing products through the foam it creates is a bit airy and loose and not as dense and luxurious as the foam created by infamous SLS.  As for mildness, it goes somewhere in the middle. [more]
what‑it‑does emulsifying | surfactant/cleansing
A castor oil derived, white, lard-like helper ingredient that is used as a solubilizer to put fragrances into water-based products such as toners.
what‑it‑does emulsifying | surfactant/cleansing
A clear, light yellow water-loving oil that comes from coconut/palm kernel oil and glycerin. It's a mild cleansing agent popular in baby washes and sensitive skin formulas. [more]
what‑it‑does surfactant/cleansing | viscosity controlling | emulsifying
A cleansing agent whose main thing is adding viscosity and foam to cleansing formulas.  Chemically speaking, it is the little sister of Cocamide DEA and has similar properties to that guy. [more]
what‑it‑does emulsifying | surfactant/cleansing
what‑it‑does surfactant/cleansing | viscosity controlling
what‑it‑does buffering
An AHA that comes from citrus fruits. It is usually used as a helper ingredient to adjust the pH of the formula. [more]
what‑it‑does cell-communicating ingredient | skin brightening | anti-acne | moisturizer/humectant
A multi-functional skincare superstar that has clinically proven anti-aging, skin lightening, anti-inflammatory and barrier repair properties. [more]
what‑it‑does perfuming
The generic term for nice smelling stuff put into cosmetic products so that the end product also smells nice. It is made up of 30 to 50 chemicals on average. [more]
what‑it‑does emulsifying | surfactant/cleansing
what‑it‑does emulsifying | surfactant/cleansing | emollient
A helper ingredient that can solubilize challenging oils and oil-loving actives into cleansing products. It also has emollient and emulsifying, and wetting properties.
what‑it‑does exfoliant | anti-acne | soothing | preservative
One of the gold standard ingredients for treating problem skin. It can exfoliate skin both on the surface and in the pores and it's a potent anti-inflammatory agent. [more]
what‑it‑does preservative
A preservative that works mainly against fungi. Has to be combined with other preservatives. [more]
what‑it‑does viscosity controlling
Sodium chloride is the fancy name of salt. Normal, everyday table salt.  If (similar to us) you are in the weird habit of reading the label on your shower gel while taking a shower, you might have noticed that sodium chloride is almost always on the ingredient list. [more]
what‑it‑does buffering
Lye - A solid white stuff that’s very alkaline and used in small amount to adjust the pH of the product.  [more]